介绍了以PC为基础的开放式数控系统——PCNC的产生背景；
The paper introduces background of open CNC system-PCNC based on PC.
以PC为基础的开放式数控系统在结构和性能上都存在很大局限性。
There exists great limitations in architecture and performance on open nc based on PC.
介绍了基于PMAC的开放式数控系统在栽剪机中的应用，论述了数控系统的硬件构成和工作原理。
This paper introduces the application of PMAC numerical control system in clothes cutter machine. Hie hardware structure and working principal of the numerical control system is described.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
以自动数控玻璃雕刻机为例，开发一种基于PMAC的开放式数控系统，该控制系统包括硬件设计和软件设计两大模块。
With the automatic NC glass engraver machine, develop an open architecture NC system based on PMAC, which includes two modules of hardware design and software design.
介绍了基于PC的开放式数控系统，以及一些集中体现了现代运动控制技术的产品。其中着重介绍了PMAC多轴运动控制器。
It also introduces the open NC system based on PC and some products, especially introduces the PMAC motion controller.
阐述了软件芯片的特点、功能划分和接口，并以所开发的镗铣床数控系统为例，对基于软件芯片的开放式数控系统的重构过程给予了详细阐述。
Apply the theory of software reuse to the development of nc system, draw the definition of software IC conception, give an expatiation on the functions and interfaces of software ICs.
提出一种基于STEP-NC的开放式数控系统，确定了开放式数控系统的总体结构，并着重介绍了STEP-NC数控系统各组成模块的功能。
The open CNC system on STEP-NC was brought forward. The gross structure of the open CNC system was put forward, and the function of each compositive module of…
在分析开放式数控系统和网络数控技术的基础上，首次提出了数控信息网络存储制造的新概念。
On the basis of analyzing open CNC system and network CNC technology, the new concept of nc information network storage manufacture was presented.
尽管开放式数控系统的概念已经出现了很久，但在业界一直未能得到统一。
Though the conception of open CNC system, but the definition of it isn't agreed by industry.
论文对开放式网络数控系统的各种信息进行了研究，并建立了各种信息模块，详细论述了数控系统信息集成的一些关键技术。
The paper researches information of open network CNC system, sets up module of information and elaborates the key technology of information integration of CNC system.
开发了由PMAC运动控制卡和工业PC机组成的开放式多功能激光模切加工数控系统。
An open and multifunctional laser die-cutting numeric control system was developed with PMAC motion control card and industry PC.
提出了一种新颖的开放式铣床智能数控系统的体系结构。
A new open architecture multi-processor intelligent CNC system design for milling machine is presented.
实践证明，该系统完全能满足现代数控机床对开放式数控系统的要求。
It's proved by practice that this system could completely meet the request of modern numerical control machine tool for open numerical control system.
实验结果证明，基于软件重用技术开发数控系统软件的方法是可行的，可以从一定程度上实现开放式数控系统的重用性，互换性。
The result of experiment proves that the thought is available, and it can make the reusability and interchangeability of CNC software by some degree.
本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。
This thesis presents the research and design of the software system of the open CNC based Camshaft grinding machine.
论文详细阐述了开放式网络化数控系统的概念、内容及其体系结构，并对数控系统的实时性进行了分析，建立了一种NC嵌入PC型数控系统的软硬件结构。
The paper introduces concept, content and architecture of open network CNC, analyze Real-time of CNC and establish a platform of open network CNC of NC-embedded PC structure.
本文以开发凸轮磨床开放式数控系统为目标，涉及硬件、软件设计两个方面，侧重数控系统的软件设计。
Aimed at developing open architecture CNC system for CAM grinder, the design of hardware and software is included and the software design is the focus in this paper.
该数控系统是一种用PMAC卡实现前台实时运动控制，IPC机实现后台管理及人机界面接口的开放式、模块化数控系统。
It is an open and modularization NC system, which realizes real-time movement control by PMAC, and background managing and man-machine conversation by IPC.
经过实例验证，使用本文设计的宏指令系统编制而成的宏程序，完全可以在开放式数控系统上正确运行。
After example validating, the macro program wrote with macro instruction system designed in this dissertation can run well in open NC system.
并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。
The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.
开放式数控系统不仅要实现系统的功能属性，还要尽可能地实现其非功能属性。
It realizes not only the system's function properties but also it's non-function properties with open CNC.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
该模型解决了数控系统中混合任务调度的问题，降低了任务模块间的耦合性，能够覆盖所有的调度对象，更适合开放式数控系统的设计要求。
The model solves the hybrid task scheduling problem, reduces the coupling between the task modules, covers all of the scheduling objects, and is more suitable for open CNC systems.
最后，我们完成了运动控制器驱动程序和开放式数控系统应用程序的开发工作，并在实际应用中取得了满意的效果。
At last, the development of motion controller driver software and host application program is finished, and the results of the applied experiments show the CNC software system is satisfactory.
介绍研究基于开放式运动控制器的数控系统的硬件设计，提出一套完整数控系统的机械以及电气解决方案。
Study the hardware design of the CNC system based on the open motion controller. Provide a whole solution of mechanism and electric design.
在开放式数控系统中，PLC模块的开发在高性能CNC系统中有着重要的作用。
The PLC is an important module to high-performance open CNC system.
采用面向对象技术，以动态连接库的形式开发开放式数控系统的基本构造单元—软件功能模块。
Software modules in the form of Dynamically Linked Library using object-oriented program technology are design, which are the basic system components.
采用面向对象技术，以动态连接库的形式开发开放式数控系统的基本构造单元—软件功能模块。
Software modules in the form of Dynamically Linked Library using object-oriented program technology are design, which are the basic system components.
应用推荐