青钢应用“转炉-小方坯连铸机-高速线材轧机”工艺流程试制EH14焊接用钢盘条。
The advanced development process flow of "converter-small billet continuous casting machine-high speed wire rod mill" is adopted in developing EH14 wire rod for weld.
为适应大型工程机械焊接用钢需要，对低合金高强度钢HG80及其焊接接头的疲劳裂纹扩展速率进行了研究。
To meet the development of steels used for the large engineering machinery, fatigue crack growth rates of a high strength low alloy steel HG80 and welded joint were investigated.
将转接件分别焊接在埋件上及工字钢上，然后将立柱用螺栓与转接件连接起来。
Weld switchover pieces separately on embedment and I-steel, and then connect the mullion with bolts and switchover pieces.
由于碳在这类钢中的含量很高，用高碳钢制作的零件通常很难被加工和焊接。
Since the carbon content of these steels is so high, parts made from high carbon steel are normally difficult to machine and weld.
用国际焊接学会推荐的方法进行统计处理，并和相同接头形式结构钢的疲劳强度进行了比较。
Moreover, the test data were statistical treated with the method recommended by IIW and compared with fatigue strength of structural steel with identical joint type.
采用的钢盒用厚的横向钢板与纵向钢板焊接而成。
The steel boxes made of thick lateral steel plates were welded with longitudinal steel plates.
在我国，海洋平台钢A131和A537均用LB-52NS焊条焊接，因而这两种材料焊接接头的强度匹配不同。
The LB-52NS electrode is used in our country to weld both A131 and A537 offshore platform steel, so the strength matching of their welded joints is different.
本文综述了日本的潜艇用钢及其焊接材料的各项焊接性能试验情况。
Welding properties of submarine steel and welding consumables of Japan were presented in this paper.
简体中文标题：焊接消耗品。高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属。分类。
English Name: welding consumables - wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
对武钢研制的大线能量焊接耐火耐候建筑用钢的力学性能、焊接性能与其典型应用进行了研究。
The mechanical property, welding property and typical application of large line energy welding and constructional steel with fire and weather resistance are studied in this paper.
介绍了超低碳贝氏体wdb620钢的力学性能，用几种传统的焊接性试验方法对该钢焊接接头的力学性能及抗裂性进行了研究。
The mechanical properties of steel WDB620 are introduced. Some traditional tests about the mechanical properties and cracking resistance on its welded joint have been made.
通过冷裂敏感性试验、焊接热影响区最高硬度试验及可调拘束试验，对新型铁路车辆用TCS耐蚀钢的焊接性进行了深入系统分析。
The weldability of TCS corrosion resistant stainless steel for railway wagon was investigated by cold cracking sensitivity test, HAZ maximum hardness test and varestraint test.
对海洋平台用高强度钢焊接接头多次补焊的疲劳性能进行试验研究，给出采用威布尔分布下的寿命估算式及R—S—N曲线。
Based on an experimental study of multiple repairing welded joints on high strength offshore structure steel, the R-S-N curves and life estimation equations under Weibull distribution are presented.
简体中文标题：焊接消耗品。不锈钢和耐热钢氧炔焊用焊丝电极、焊丝和焊条。分类。
English Name: welding consumables - wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - Classification.
第二部分研究了在氩气作保护气体的情况下，用变极性TIG焊方法焊钢时，焊接电流、电压的变化情况和电弧形态的变化。
The second is, when steel is welded by means of VPTIG of argon, the changes in current, voltage and arc shape.
用FCB法对船板钢进行焊接试验，发现在焊缝中存在内埋裂纹。
Buried flaw was found in FCB weld. CTOD test was performed on the weld sample.
研究了重型吊车梁用D36低合金高强钢的焊接性。
The paper investigates the weldability of D36 HSLA steel used for heavy crane beams.
一般结构用钢和焊接结构钢用在建筑钢结构，桥梁，船舶和汽车。
General structural steel and welding structural steel are used in the construction of steel structures, Bridges, ships and automobiles.
当指定用316不锈钢阀时，3c系列承插焊接阀的标准阀体盖也是316 (CF 3m)不锈钢。
The standard body caps of the Series 3c socket-weld valves are 316 (CF3M) stainless steel when a 316ss valve is specified.
本发明公开了一种陶瓷与钢焊接用高温钎焊合金焊料及其制备方法。
The present invention discloses an alloy soldering flux for high-temperature soldering ceramics and steel, and its preparation method.
研究了宝钢高强度铁道车辆用钢的焊接性。
The weldability of high strength steel for railway vehicle produced by Baosteel was studied.
特性：Q235钢属于低碳钢，是最通用的工程结构用钢之一。具有一定的强度、塑性、焊接性良好。
Characteristic: Q235 steel is lowcarbon steel and usually used in engineering structure with a certain extent of strength , plasticity and good weldability.
研制了一种低焊接裂纹敏感性高能量输入焊接用低合金高强钢，并研究了其冷应变时效行为。
A new large heat input welding high strength low alloy steel with low susceptivity to weld cold cracking was developed and the cold strain aging behavior was investigated.
宝钢车轮用热轧酸洗钢带是采用控轧控冷工艺生产的具有优良冷成形性能和焊接性能的低碳微合金化钢。
Hot-rolled pickled steel for automotive wheel is low carbon micro-alloyed steel with excellent properties of cold forming and welding produced by using advanced TMCP technology.
采用阀门用钢A105作为试验材料，采用机械振动焊接与常规埋弧自动焊接相结合的方法进行对比试验。
The contrast tests of vibratory submerged-arc welding and normal SAW(submerged arc welding) on the valve steel A105 was carried out.
本系列产品适用于一般结构钢和工程用热轧钢板、钢带、可供焊接、铆接、栓结构件用。
This series of product is applicable for general structure steel and engineering used hot-rolled plates and steel strips to weld. rivet and bolt structures.
试验结果表明，该钢具有焊接冷裂纹倾向低、可用大线能量焊接、焊后不宜进行消氢处理等特点，可用作高强度大焊接线能量用钢。
A new low alloying steel with low susceptibility to weld cold cracking has been developed for large heat input welding in pressure vessel engineering.
试验结果表明，该钢具有焊接冷裂纹倾向低、可用大线能量焊接、焊后不宜进行消氢处理等特点，可用作高强度大焊接线能量用钢。
A new low alloying steel with low susceptibility to weld cold cracking has been developed for large heat input welding in pressure vessel engineering.
应用推荐