模量随热氧化温度变化不明显。
The tensile modulus showed a negligible change with thermal oxidation temperature.
热氧化失重产物中升华的固体物质占大部分；
The products of thermal weight loss is largely sublimated solid matter.
用于冷却热氧化球团。
碳纳米管在空气在的热氧化性由热重实验测定。
Thermal oxidation of carbon nanotubes in air was performed by thermogravimetric experiment.
考察了不同类型纳米铝粉的能量性能及热氧化特性。
Energy performance and thermal behavior of different nano-aluminum powders were investigated.
碳纤维对于PPS的热氧化交联和热氧化降解均有阻缓作用。
The presence of carbon fibre plays a retardation role in both case of oxidization crosslinking and oxidization degradation of PPS.
报告了相应的成膜技术、膜厚控制技术、热处理技术和热氧化现象。
The experiment results including optical waveguide, film thickness control, heat treatment and thermal oxidization are reported.
热氧化和热裂解过程中沉积物的生成是影响燃料安定性的重要因素。
The formation of deposits, which caused by thermal oxidation and thermal cracking, was the main factor on the stability of fuel.
采用在硅上磁控溅射金属钛膜再热氧化的工艺制备了多晶氧化钛薄膜。
Polycrystalline titanium oxide films are fabricated on silicon by thermally oxidizing titanium.
用高频光电导衰减法（PCD）研究了热氧化钝化对直拉硅少子寿命的影响。
The effects of surface thermal oxidation on the minority carrier lifetime of Czochralski (CZ) silicon wafers are investigated by photoconductive decay (PCD) method.
作为一道热氧化工序，退火处理不仅是一个氧化过程，而且是一个结晶过程。
As a thermal oxidation procedure, the annealing treatment is not only a crystallization process but also an oxidation process.
本文主要介绍用高纯氧热氧化制作铅约瑟夫逊隧道结的方法以及一些实验结果。
This paper presents principally the fabrication procedures of lead Josephson. tunnel junctions formed by thermal oxidation in high purity oxygen and reports some experimental results.
讨论了硝酸铵、硫酸铵和浓硫酸对自制甲壳素热降解和热氧化降解过程的影响。
Thermal and thermo-oxidative degradation of chitin with ammonium nitrate, ammonium sulfate and concentrated sulfuric acid were studied.
发现这种复合弹性材料在热氧化后力学性能的保持率比参照样品有明显的提高。
After aging test, its retention rate of mechanical properties is higher than that of the reference group.
第一次使用高雷诺数热氧化安定性实验机来定量检测喷气燃料的热氧化安定性。
This thesis for the internal first time puts forward the possibility of using dispersant for improving the thermal oxidation stability of Jet fuel, at same time the dispersant were chosen.
热氧化-湿化学法制备的纳米棒在锌片表面更致密、排列更加有序、取向性更好。
Moreover, the approach combining thermal oxidation and wet-chemical favors the formation of the denser, ordered epitaxial ZnO nanorods on the surface of zinc foil.
阳极氧化加复合的较高温度的热氧化将得到粗糙、并分布着许多凹坑的转化膜层。
Anodizing with thermal oxidizing at higher temperature will get rough films with a many hollow.
研究表明温度是影响热氧化降解速率最重要的因素，而氧含量的影响则相对较小。
It is shown that the temperature is the most important factor influencing the rate of thermo-oxidative degradation while oxygen content is of negligible importance.
利用差示扫描量热法(DSC)对DHA和EPA甘油酯的热氧化动力学进行了研究。
The thermal oxidation kinetics for DHA and EPA glycerides was studied by differential scanning calorimetry (DSC).
对实验数据进行了反应动力学分析，发现线缆绝缘材料的热氧化降解反应为一级反应。
Kinetic analysis of experiment data was made. It is found that thermal oxidative reaction is a first-order reaction under the experiment condition in this work.
目的：评价大气热氧化、阳极氧化和氮化钛镀膜对铸造纯钛表面膜组成和厚度的影响。
Objective: To evaluate the influence of air oxidation, anodizing and tin coating sample on elemental composition and thickness of surface film of cast pure titanium.
第一个重要的来自热氧化组薄膜是栅氧化层，在它之下，源和漏之间就能形成导电通道。
The first important thin film from the thermal oxide group is the gate oxide layer under which a conducting channel can be formed between the source and the drain.
将硅本征氧化层与硅热氧化层两种键合界面在退火过程中的行为进行了理论分析与比较。
Wafer pairs with bonding interface being native oxide or thermal oxide have different bonding behavior in the annealing process, which were investigated and compared.
每个系统的设计可满足特定需求，它们可以与活性炭和热氧化系统烟气处理系统一起使用。
Each system is designed to meet site specific needs and can be fully integrated with activated carbon and thermal oxidation systems off-gas treatment systems.
在煤自燃动力学基本方程基础上得到了煤绝热氧化方程，并设计了相应绝热氧化实验装置。
Based on the fundamental theory of coal to self-ignite and the adiabatic oxidation equation, the adiabatic oxidation equipment was designed and.
这种烟道气应有效地用作预热氧化剂，用于蒸汽甲烷重整锅炉或其他大型辐射型工艺锅炉。
This gas should be effectively utilized as preheated oxidant to steam methane reforming furnaces or to other large radiant-type process furnaces.
本文通过试验研究提出了在碱性压热氧化条件下，金精矿在高压釜内进行闪速氰化的新工艺。
The gold concentrates are pretreated by alkaline hot-press oxidation followed by flash cyanidation in autoclave.
研究了TA2钛板复合氧化（热氧化与阳极氧化的迭加）获得氧化膜的形貌、成分和耐蚀性。
The morphology, composition and corrosion of different complex oxidizing films on TA2 titanium were investigated, which were prepared by combining anodic oxidizing and thermal oxidizing.
本文采用玻尔兹曼-曼特诺变换方法，得到了一个新的描述硅快速热氧化生长动力学的解析模型。
A new analytical model for describing the growth kinetics of Rapid Thermal Oxidationof Si with the use of Boltzmann-Mamtano transformation is reported.
该创造性的轮廓既允许通过热氧化来均匀地生长氧化物层，并且也允许结构的基本均匀的蚀刻速率。
The inventive profile allows for both the uniform growth of oxide layers by thermal oxidation, and substantially uniform etching rates of the structures.
应用推荐