文章探讨了烧结钢高温形变淬火的强韧化机理。
Strengthening and toughening mechanism of HTMT of sintered steel was discussed.
研究了液相烧结钢结硬质合金-铁双层复合材料的生产工艺。
The liquid phase sintering process of steel based carbide - iron bimetal composite was researched.
高温形变淬火显著改善烧结钢和粉末锻钢的延性和断裂韧性。
HTMT significantly improves the ductility and fracture toughness of sintered steel and powder forging steel.
观察了含硅锰母合金烧结钢的组织变化和合金元素锰、硅的分布情况。
The structural changes of silicon manganese containing master alloy and the distribution conditions of manganese and silicon components have been observed.
用广义ubet方法分析了烧结钢圆环光滑平板镦粗变形，并作了实验验证。
The general UBET is applied to analyze deformation of sintered steel ring is smooth plate upsetting, and theoretical calculations are compared to experimental results.
高温形变淬火是形变热处理的一种，它在烧结钢和粉末锻钢的生产中得到了应用。
High temperature thermomechanical treatment (HTMT) is a kind of TMT. It has been applied in the production of sintered steel and powder forging steel.
烧结钢部件在生产过程中，尤其是烧结之后其表面有时会出现针孔、孔洞及斑痕等缺陷。
Among others, surface defects such as pinholes, holes and stains appear during the production of PM components, especially after sintering.
通过添加硅锰母合金，将硅、锰这两种对氧亲和力较高的元素加入到烧结钢中，以改善烧结钢的力学性能。
The SM master alloy was used to add high oxygen affinity elements Mn and si into the sintered steel as alloying elements to improve the mechanical properties.
通过烧结杯试验和对转鼓指数的测定研究了铁料、碱度、燃料消耗和水分等因素对水钢烧结强度的影响。
The influence of iron materials, alkalinity, fuel consumption and moisture on sinter strength were studied through the sintering cup test and the drum index test.
介绍了涟钢烧结厂为提高设备作业率和圆筒混合机的混匀效率，对圆筒混合机衬板材质和结构进行的改造。
The modification of drum mixer liner material and structure conducted in LIANGANG sintering plant for increasing equipment work rate and mixing efficiency was presented in this paper.
本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illustrated.
本文通过烧结杯试验和转鼓指数测定研究了铁料、碱度、燃耗和水分对水钢烧结矿强度的影响。
This article studies the influence of iron materials, basicity, fuel consumption and moisture on sinter strength through the sintering pot test and the tumbling test.
简要介绍了石钢烧结原有生石灰输送系统存在的问题及其气力输送系统的工艺特点和设备。
The problems in original transporting system of quick lime in sintering production of Shi Steel are introduced as well as the technology and equipment of air-transporting system.
用球状烧结碳化钨代替粒状铸造碳化钨作钢齿钻头齿面堆焊材料是提高齿面强化效果的有效途径。
It is available to strengthen the bit teeth by replacing the granular casting tungsten carbide with the spheroidal sintering tungsten carbide.
对铁硼合金和钼对钢结硬质合金烧结的影响进行了综述。
The effect of Fe-B alloy and Mo on sintering of steel based carbide is reviewed.
达克罗的应用范围很广，它不但可以处理钢、铁、铝及其合金，还可以处理烧结金属，以及特殊的表面处理。
Dacromet has a wide range of applications. it not only can be used to treat steel, iron, aluminum and its alloys, but also can handle sintered metal, and the special surface treatment.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金混合粉末（对应国家牌号TLMW50）复合在碳素钢的表面。
Steel-bonded cemented carbide powder mixture(TLMW50) processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
粉末合金刹车片在烧结后有时会意外淬火，造成刹车片钢背脆化而报废。
The accidental quenching, occurring in the sintering process, will make the steel back of a powder alloy brake lining brittle and useless.
铬锰氮钢铸件，是冶金企业生产烧结矿用烧结机中的易损重要备件。
CrMnN steel casting is the key for sintering machine to produce sintering mine in metallurgy enterprises.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
This paper analyzes the influences of carbon, silicon and aluminium on the surface reaction when sintering austenite stainless steel powder.
针对石钢的原料条件，进行了烧结配加扬迪矿的试验研究，分析了配加扬迪矿对烧结各项指标的影响以及工业生产应用后的实际效果。
The trial research of adding Yangdi ore in sintering material is conducted based on the Shi Steel's conditions, the influence to do so on various sinter index analyzed as well as practical result.
简要回顾了莱钢烧结厂近几年以来在降低烧结矿固体燃耗方面采取的措施及取得的效果。
This paper briefly retrospects measures taken by the Sintering Plant in reducing sinter ore solid fuel consumption and the obtained effects.
介绍了萍钢公司烧结配加某澳大利亚矿粉的烧结试验。
This paper describes the sintering test of adding fine ore of Australia in Pingxiang steel.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied.
熔体过滤器采用不锈钢金属纤维烧结毡为过滤介质，是一种具有无数不规则孔隙通道和一定厚度的载体。
Fusion filters adopt the stainless steel metallic fibre sintered fibre felt as filtered medium. lt is a carrier with a great amount of irregular pores and certain thickness.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面，成功获得覆层材料。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
介质浆料的烧结致密化程度对不锈钢基板的绝缘性能具有至关重要的影响。
The sintering densification of dielectric paste had crucial effect on the insulation of stainless steel substrate.
介绍了安钢烧结厂混匀料场的工艺流程、控制系统的组成结构、功能及自动配料系统的应用和效果。
The paper introduces the process of mixing material spot in Angang sinter factory, structure of control system, function and its automatic charging system.
介绍了南钢烧结厂生石灰配消系统改造的目的，改造方案的选择及效果，并提出了进一步完善的措施。
The goal, project selection and effect of transforming quick lime coordination and digestion system at Nansteel sintering plant are introduced. Meanwhile, perfect measures are put forward.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
应用推荐