比例、伺服液压技术，低功率气动控制阀，填料密封生产。
Ratio, servo hydraulic pressure technology, low power pneumatic control valve, production of stuffing.
降低能耗，提高效率，是现代液压技术中的重要课题之一。
Decreasing energy waste and raising efficiency is one of importance tasks in modern hydraulic technology.
本文探讨了液压技术中的三个问题：泄漏、噪声及液压系统安装。
Leakage, Noise and Installation problems have been discussed in general in this paper.
纯水液压技术是当前流体传动及控制领域的学科前沿研究方向之一。
Water hydraulics technology is one of the top research aspects in fluid power transmission and control.
液压伺服马达拖动和液压伺服加载，目前列为液压技术研究的前缘学科。
Motor dragging and servo load of hydraulic pressure system has been looked as the front subject of the technology of hydraulic pressure.
履带式液压钻机，采用新型液压技术，耗气量低，回转扭矩大，移孔变位方便。
Crawler hydraulic drill, and USES the new type of hydraulic technology, low gas consumption, rotary torque, move the hole deflection is convenient.
负载传感控制作为一种先进的液压技术，近几年在工程机械上展现了其应用趋势。
The control of load sensing is an advanced hydraulic technology which is demonstrated with the trend of application in construction machinery.
采用液压技术，配置合理，整机价格低，油耗省。 支架采用定位齿盘，结构新颖。
Using hydraulic technology, reasonable configuration, the price islow, the fuel consumption province.
采用液压技术，使得此产品在本行业的同类产品中取得突破，大幅度提升了产品的附加值。
The product applies hydraulic pressure technology. It improves a lot when comparing with same products in this industry and has a large mount grown on value added.
在液压实验台的改进设计中采用自动控制技术是液压技术和测控自动化技术相互交叉的必然结果。
It is the consequence of development in the hydraulic and automatic to use autocontrol technology in the modifying design of hydraulic experimental table.
液压振动技术是液压技术新领域，高频液压振动又是该领域的前沿课题，一直是人们研究的重点。
The technology of hydraulic vibration is a new field in hydraulic technology, and the super-frequency hydraulic vibration is a front edge subject and is always a key in study.
高速开关阀采用脉宽调制(PWM)原理来控制其平均流量，极易实现计算机控制技术和液压技术的有机结合。
The average flux of the PWM high-speed on-off valve are regulated by the Pulse-Width Modulation theory and it is easy to combine the computer and hydraulic control technology.
经过详细分析液压技术在CIMS物流设备中的应用情况可知，液压技术在CIMS的物流设备中有着广泛的应用。
Based on the status analysis of the application of hydraulic technology to the material handling equipment in CIMS, hydraulic technology is extensive used in the material handling equipment in CIMS.
介绍了全液压稠油热力开采系统的采油装置及其液压技术原理，分析了系统的可行性，对系统进行了井下流体热力学研究。
The oil exploiting facility and hydraulic working principle of the fully hydraulic thermal exploiting system for viscous crude oil are introduced with its feasibility analyzed.
此发明解决了现有液压工具手工操作较为费力、使用寿命短等技术问题。
The invention solves the technical problems of more laboursome manual operation and short service life of the prior hydraulic tool.
技术规定还要求每一辆赛车都具有交叉双回路液压制动系统，也就是前后轮使用互不干扰的储油器。
The technical regulations also require that each car has a twin-circuit hydraulic braking system with two separate reservoirs for the front and rear wheels.
技术规定还要求每一辆赛车都具有交叉双回路液压制动系统，也就是前后轮使用互不干扰的储油器。
The technical regulations also require thateach car has a twin-circuit hydraulic braking system with two separatereservoirs for the front and rear wheels.
这个技术员说，“我们有几个液压传感器显示数值低的离谱。”
The technician said, "We've had some hydraulic 'ducers go off-scale low."
这些液压钻机借助了计算机控制技术，泵与发动机的匹配控制实现智能化，不但功率更强，而且更加省油。
The hydraulic drilling machine with computer control technology, the pump and engine matching control to realize the intelligent, not only power is stronger, and more fuel-efficient.
系列底部单缸液压圆锥破碎机具有两项专利技术。
TYP single cylinder hydraulic cone crusher, which wins two proprietary technologies.
介绍了用镗滚压复合加工技术修复液压缸筒的过程，此法修复缸筒质量稳定，生产效率高。
This paper introduces the process of repairing hydraulic cylinder by using boring and rolling combined working technology, working quantity is steady and production efficiency is high in this method.
摘要船闸人字门顶门检修的传统方法是采用液压千斤顶手动作业，工作效率低，时间长，技术风险大。
Traditional method for overhaul of the top of miter gate is through manual operation by hydraulic hoisting jack which has the shortcomings of low efficiency and great risk.
着重介绍MK - 7型全液压坑道钻机的主要技术参数、钻机特点、部件结构、现场应用情况。
The main technical specification, specialty, structure of parts and field application cases of MK-7 Hydraulic Gallery Rigs are introduced.
并且对现在的液压集成块的CAD技术有很好的认识。
And CAD integrating one to the present hydraulic pressure has very good understanding.
液压系统采用了先进的二通插装阀系统、进口高性能的电子泵技术，实现了主缸压力与流量的双闭环控制；
The press takes use of advanced two-way cartridge valve system and imported electric pump technology which can realize double closed loop control of pressure and flow rate.
指出推进液压缸控制应采用分区控制技术，并给出了推进液压缸分区原则。
It points out the thrust hydraulic cylinder should adopt zone control, and zoning principle of thrust hydraulic cylinder was also supplied.
本文通过对液压比例技术在卷染机上的应用进行了讨论。
The paper discusses the application of of hydraulic proportional technology on jogger.
《液压与气动技术》不仅理论性强，而且具有很强的实践性。
The course "Hydraulic and pneumatic technology" is provided with not only deep theory, but also strong practice.
《液压与气动技术》不仅理论性强，而且具有很强的实践性。
The course "Hydraulic and pneumatic technology" is provided with not only deep theory, but also strong practice.
应用推荐