浮法玻璃按平方米出售，在最后阶段，电脑将客户的要求转化为旨在减少浪费的切割模式。
Float glass is sold by the square metre, and at the final stage computers translate customer requirements into patterns of cuts designed to minimise waste.
在明亮的客厅的矛盾，这个永恒浮法玻璃墙。
The luminous floating glass walls of the living room contradict this permanence.
计算结果可供浮法玻璃退火窑设计与控制参考。
Quantitative results can be used to improve design and control of annealing lehrs for float glass.
本文对浮法玻璃拉边过程进行了数值模拟和实验研究。
In the thesis, we carried through numerical simulation and experimental study of the stretching process of float glass.
本文提出了浮法玻璃退火窑间接冷却区内传热过程的数值模拟方法。
In this paper, a simplified mathematical simulation of heat transfer in indirectly cooling zone of float glass annealing lehr was presented.
渗锡层诊断证明：渗锡层的介电常数大于浮法玻璃内部的介电常数。
It is shown by the diagnosis of tin surface layer that the dielectric constant in the tin surface layer is larger than that inside the float glass.
以霞石正长岩取代长石，按照浮法玻璃的成份制备配合料并熔制玻璃。
Using nepheline syenite as a substitute for feldspar, the batch mixtures were prepared on a composition of float glass and are melted into glasses.
研究结果表明：不同原因引起的浮法玻璃的端面条纹具有不同的特征表现。
The experimental results show that float glass side stripes have character figure due to different reason.
这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致。
This finding is in keeping with the expected performance based on the difference in thermal expansion coefficients between spacer material and float glass.
着重从设备构成和机械特性方面介绍了用于浮法玻璃生产的吊挂式全自动拉边机。
An automatic suspend edge roller used in float glass industry was introduced based on the structure and mechanical behavior of the roller.
分析了提高浮法玻璃光学变形角的过程，总结了影响浮法玻璃光学变形角的因素。
The procedure of enlarging deflection Angle of float glass is analyzed and the factors of affecting the deflection Angle is found out.
为此提出测量浮法玻璃在加热与不加热时的透过率比值来计算渗锡量的测量方法。
A measurement method of the tin content calculated based on the measurement of the transmittance ratio was proposed.
阐述了空分装置在浮法玻璃生产线上的配置状况及空气压缩机在空分装置中的作用。
The configuration of air separation equipments on float glass line was pictured out and the role of air compressor in air separation equipments was also described.
针对浮法玻璃熔窑运行后期熔化部压力波动形成的原因及对策，做了较为详尽的论述。
This paper discussed the causes of pressure fluctuation of melting region in later stage of float glass furnace in detail and the countermeasures to this fluctuation was also introduced.
许多美国商人说的有些道理：日本不仅倾销电视机，还有钢铁、纺织品、浮法玻璃和无线电调谐器。
Many American businessmen contend, with some justification, that the Japanese dump not only TV sets but also steel, textiles, float glass and radio tuners.
揭示了生产中浮法玻璃气泡形成的机理、位置、尺寸、组成与操作工艺条件之间的规律。
This paper reveals the relationship between the operations of float glass and the size, location, composition and mechanism of bubble generation.
这是一个通过酸蚀浮法玻璃来获得一种与众不同，光滑均匀，像绸缎一样的玻璃的过程。
A process of acid etching one side of float glass to obtain a distinctive, uniformly smooth and sati.
工艺参数的控制方法必须针对浮法玻璃熔窑运行后期的特点，才能保证工艺制度的稳定。
The technological parameters control must aim at the running characteristics of float glass furnace in its later stage so as to insure the stability of technological regulations.
借助JCXA- 733型电子探针仪对浮法玻璃表面呈现的光畸变点缺陷进行了研究。
The spot distortion flaw on the surface of the float glass has been studied, Using the JCXA-733-type electron microprobe.
气泡是浮法玻璃中的主要缺陷，从来源上搞清气泡的分类，能为解决气泡问题提供科学依据。
Bubble is the main defect in float glass, arranging bubble under categories on the basis of its origin can provide scientific foundation for avoidance of bubble occurrence.
利用三维计算机模拟技术，研究了窑坎在超薄浮法玻璃生产中对稳定熔窑内玻璃液流的作用。
The function of the weir in the furnace of the thin float glass was studied by using three- mathematics simulation.
第一个生产浮法玻璃的工厂于1959年开业，目前估计有百分之九十的平板玻璃仍然是这样生产的。
The first factory to produce usable float glass opens in 1959; an estimated 90 percent of plate glass is still produced this way.
该工厂设计产能为每天450吨浮法玻璃，以满足中国正在兴起的建筑热潮对建材的上涨需求。
This plant has a designed capacity of 450 tons per day of float glass to meet the rising demand for building materials created by China's ongoing construction boom.
本文首先对浮法玻璃在线应力检测作一综合性介绍，然后对有关退火的几个基本概念进行说明。
In this paper, on-line stress measurement of float glass was described at first, and then some fundamental concepts of annealing were explained.
介绍了几类浮法玻璃在线深加工的工艺特点，包括在线镀膜、压花、钢化、喷涂、印刷及乳化等。
This paper described characteristics of some float on-line post -processing technology, including on-line coating, figuring, toughening, spray, print and opal.
探讨了浮法玻璃在冷端输送过程中，玻璃板在主线上纵向掰断并分开所产生的两块玻璃尾端碰角的现象。
This paper describes the causes of Angle bump of float glass when conveyed at the cold end while being longitudinally cut on the production line.
测定了浮法玻璃上表面与下表面的吸附水量，借助电子能谱分析了浮法玻璃表面不饱和“基团”的分布。
Amount of the adsorbed water of upper and lower surfaces of float glass is measured, Distribution of the unsaturated group on both surfaces is analyzed by means of XPS.
测定了浮法玻璃上表面与下表面的吸附水量，借助电子能谱分析了浮法玻璃表面不饱和“基团”的分布。
Amount of the adsorbed water of upper and lower surfaces of float glass is measured, Distribution of the unsaturated group on both surfaces is analyzed by means of XPS.
应用推荐