为高精度激光测量误差分析提供了理论依据。
It provides a theoretical basis for error analysis in high-precision laser measurement.
本文归纳给出多维系统测量误差分析计算方法措施，并给出算例。
This text induced Multi - Direction System measure - error - analysis calculation method and measure, and calculation examples.
从测量误差分析及现场实践证明，该方法技术先进，测量数据精确。
It is demonstrated that the method is advance in technology and the measured data are precise by both error analysis of measurement and field practice.
研究了九分力推力矢量测量误差分析方法，并计算了推力矢量测量精度。
What's more, the precision of thrust vector measurement is also calculated, depending upon the error analysis of nine-component model.
介绍了微机控制的阶梯轴多参数在线测量系统的测量原理、系统构成及测量误差分析。
The measuring principle, system composition and measuring error analysis of the computer controlled step shaft multi parameters on line measuring system are introduced.
检校应用研究分为三个部分：数字信号源的校准研究、测量误差分析及最佳测量周期的确定。
The application research will include three parts: research on the calibration of digital signal source, error analysis and the best calibration interval.
给出电路接口方式、测量误差分析及实验结果曲线，液滴体积随液滴生长过程呈现良好线性关系。
Interface circuits, error analysis and experimental result graphs are presented. Excellent linearity between the drop volume and drop growth is achieved.
通过解决激光加工中材料表面温度测量装置的难点，设计了一套新型光学系统，并给出了测量误差分析及结论。
A new optical system is designed for the material surface temperature-measuring device used in laser processing. The measurement error analysis and conclusions are presented.
在研究测量误差分析、模型误差统计检验、变形分析、可靠性分析和优化设计等问题中，经常需要对统计量分布的非中心参数进行估计。
The noncentral parameter of statistic distribution often needs to be estimated in error analysis, statistical test, deformational analysis, reliability analysis, and optimum design, etc.
本论文主要阐述了一种可远程传输数据的电能表校验系统的主要功能、误差检验方法、硬件电路、软件流程、短消息编码和测量误差分析。
In the thesis, we mainly describe the function, error test method, hardware circuit, software flow, coding message and measurement error analysis of the system.
深入分析了引起系统测量误差的原因，并利用神经网络对线结构光测量系统进行误差补偿，提高了系统的测量精度。
The reason that caused measurement error is analyzed deeply. The paper makes use of the neural network to compensate linear structured light measurement system, so improve the measurement precision.
详细分析与估计了系统的测量误差并探索了提高准确度的方法。
The error have been analyzed and estimated in detail and the method to raise accuracy of measurement have been discussed.
通过对实验结果的分析，提出了减小系统测量误差的方法和措施。
Through the analysis of the experiment results, the methods of reducing measuring error of the system are provided.
设计了一种用于混合式光电电流互感器(HOCT)的电流传感头。分析了其测量误差，给出解决的方法。
A sensor head for hybrid optical current transformer (HOCT) is designed, the error resource of it is analyzed, and the overcoming method is given.
分析了引起测量误差的因素，并对误差的控制提出了相应的方法。
The factors which caused the measuring errors have been analyzed and the corresponding methods to the control errors were proposed.
最后还进行了整个系统测量误差的分析。
本文通过对测量灵敏电流计内阻实验误差的分析，给出一种有效的减小内阻测量误差的方法。
This paper presents a method for reducing detecting error of the internal resistance of sensitive galvanometer by analyzing its errors.
本文对GN140型积分球仪的设计原理和结构作了介绍，给出了一些样品的实验数据，并对测量误差进行了分析。
This paper describes the fundamental of design and the structure of integrating spheremeter type GN140, and gives the data of experiment and the analysis of errors.
对线加速度计辅助惯性姿态角测量的误差分析表明，测量误差由加速度计噪声、二次积分离散化、信标噪声和加速度计频率特性误差组成。
The error analysis shows that the measurement error is caused by the noise of the accelerometer, discrete double integration, noise of beacon and frequency characteristic error.
文章介绍了综合量仪的机械结构、微机控制系统硬件和软件设计，并对测量误差来源进行了分析。
Here the design of mechanical structure of the tester and hard- and soft-ware of the PCcontrol system. An analysis is made on the sources oftesting error.
利用这种方法，计算了冲击电压峰值和波前时间的数字测量误差，并分析了误差的影响因素和变动范围。
Errors in digital measurement of the peak value and front time of impulses are calculated by this method, with influence factors and variance ranges analysed.
对由于惯性基准的漂移而引起的载体姿态角的测量误差也进行了分析。
The measurement error of vehicle's attitude caused by the drift of platform reference is also analyzed.
该文从理论上对CPFM和带参考室的CPFM的流量测量误差进行了分析。
The errors of measurement of CPFM and CPFM with a reference chamber were theoretically analyzed in the paper.
电容分压器是所采用的电压传感元件，本文讨论了杂散电容对测量误差的影响，分析了电网暂态现象对分压器的影响。
Capacitor voltage divider is the voltage sensor. The influence of stray capacitor to measurement is discussed, and the influence of transient element to the divider is analyzed.
本文介绍了管道整体保温结构热阻测试装置的原理和组成，并分析了该装置的测量误差。
In this paper, principle and constitute of thermo-resistance detector of integral insulation construction in pipeline are introduced and error in measure is analyzed.
文中讨论了口腔这一特殊的测量环境和一些影响测量精度的因素，在实测中摸索了一些减小误差的方法，最后对测量误差作了分析。
The paper discusses the factors which effect the measurement precision and the special measurement environment in oral cavity, and some methods for reducing errors and error analyses are also given.
最后通过理论分析证明，当这些数据的测量误差满足一定条件时，即可实现游标测距。
The paper gives the result that the range vernier can be realized when the errors of these data are limited.
最后，分析了游标卡尺测量误差及标准球安装误差对标定结果的影响。
Finally, the influence of the measurementing errors and the positioning errors on the calibration was analyzed.
文中简要分析了细丝热电偶的测量误差。
The measurement error of fine wire thermocouples is discussed briefly.
文中简要分析了细丝热电偶的测量误差。
The measurement error of fine wire thermocouples is discussed briefly.
应用推荐