于量测被测试件之电阻质，以了解其抗静电性能…
This instrument is used for testing the electrical resistance of the shoe to assess its anti-static characteristics.
对于不同测试件，只需更换极少配件和程序上简单编辑，即可进行测试工作。
Facing different test work, there only need to change very few replacement parts and edit the procedures simply, just to test.
除了第四个TMap活动，保存测试件，这个RUP步骤也包含测试过程的评价。
Besides the fourth TMap activity, Preserving Testware, this RUP step also contains the evaluation of the test process.
最后，对多个齿轮检测试件进行检测，事实验证了上述的自动检测系统的正确性和可靠性。
Finally, by carried on the testing to many tests samples, the fact has confirmed accuracy and the reliability of the automatic testing system.
对所测试件选取适当的模型，应用弹性力学理论，推导出微小位移与焊接残余应力的关系式。
On the basis of model selection from the pieces tested and according to elastic mechanics, the relation between minute displacement and welding residual stress is deduced.
一种利用纸箱抗压仪测试胶水黏结性能的专用测试工具测试架（100）和测试件（200） ；
The invention relates to a testing stand (100) of a special testing tool and a testing piece (200) used for testing the stickiness of glue by using a carton compression apparatus.
试验证实，脉冲涡流只需一次扫描就可对被测试件上不同深度的裂纹实现定量检测，因此具有广阔的应用前景。
Experiments proved that the quantification of different depth flaws could be realized just only by scanning with pulsed eddy current testing once, so it has good prospect in use.
提出了将数据文件显示为红外热波序列图像的方法，即数据映射法，以及一种便于观测试件缺陷的红外热波序列图像增强方法。
Data mapping method which displaying the data files to infrared heat wave sequent images and an enhancing method for infrared heat wave sequent image of the defect were put forward.
它利用激光散斑技术，记录了由于微小楔角引起的散斑位移量的散斑图，由此导出被测试件的微小楔角。这种方法具有光路简单、非接触、精度高等特点。
The method uses laser speckle technique to record the shift amount of speckle patterns due to micro wedge angles, and thus micro wedge cangles of the test piece are induced.
标示试件位置的图纸应呈递所有人批准。测试证明应说明材料的特定属性及所要进行的热处理。
Drawings shall be submitted to the Owner for approval showing the location of test pieces. Test certificates shall state the specified properties of the material and heat treatment given.
便携式拉压试验系统能在试验台上满足各种非金属材料试件测试试验的要求。
This kind of test system can meet the requirement of nonmetal material test in the laboratory.
试件经测试不合格则由实验室出具试验报告交送验部门，由送验部门按《不合格品控制程序》处置。
The lab will issue a test report to the delivery department if the test part fails the test. The delivery department will dispose per the "Nonconforming Product Control Procedures".
通过对混合料试件的密度测试得出了形成骨架所必要的粗集料用量。
Coarse aggregate quantity can be identified by the dense test of the mixture.
凸轮式跌落冲击台产生的次冲击能够影响试件的测试参数和性能，并能造成试件的疲劳损伤与失效。
The secondary impact acceleration pulse which is produced by the drop-test can influence the testing parameters and cause fatigue and damage of components.
焊后试件的性能测试结果表明，焊接接头的拉伸强度、断面收缩率、延伸率及冲击韧性均已超过母材。
The results of performance measurement test show that tensile-strength, contraction of cross sectional area, elongation percentage, dynamic ductility of the weld all exceed their base metal.
对试件的测试结果表明，理论值与实际值很吻合。
The measurements show that there is a good agreement between the theoretical and the practical results.
本文主要介绍用侧面观测法测量精磨玻璃表面破坏层深度的试件制做、测试仪器；
The test pieces and instrument for side- testing method to measure the depth of destructive layer of fine- ground glass surface are mainly introduced.
本机系用来测试皮革屈曲特性，在屈曲规定的次数后，取下试件，观察其龟烈或受损情形，据以判断皮革的品质。
This machine is used to perform leather bending test . After testing for a certain period of time , observe the leather if cracks or breaks to judge the quality of leather .
在测试中，标准泄漏此时将接到气室，而气室内的试件就充满了测试压力。测试结束时，结果就显示在屏幕上。
In the following test cycle the standard leak will be connected through the chamber at that moment where the test sample will be filled with test pressure.
对试件进行轴向和弯曲扭转加载测试，观察GSPS的应力、应变关系特点。
Axial loading test and torsion test were made. The stress-strain relation of the GSPS was observed.
三个试 验组试件完成最终第10 000次循环测试后，其轴向位移数据的均值差异不具有统计学意义；
No statistical difference was found in vertical migration value of prostheses for lesser trochanter fixation and cement reinforcement after they were tested 10 000 cycles.
分别以应力分析仪和显微硬度仪测试两组试件的挠曲强度和硬度值。
The flexural strength and hardness of the specimens were tested with an instron testing machine and a microhardness tester.
然而，矿粉结合料比为1.5时，由于添加熟石灰后试件太硬无法拌和，因此沥青胶浆的工程性质无法测试。
However, engineering properties for hydrated lime asphalt mastics at 1.5 dust to binder ratio, couldn't be tested because the specimens were too stiff to mix at this ratio.
根据六种典型应力集中试件的应变电测试验，用电测数据建立灰色模型，预测应力集中问题的峰值应力。
The gray modeling method need less test data and is of high precision in prediction. Therefore, the gray model is feasible to a real time test of the strain or stress concentration problem.
通过试验，研究了胶合板胶合强度检测试验中夹具与试件槽口的距离对胶合板胶合强度的影响。
An experiment was conducted to investigate the effect of the distance between clamp and cutting notch for plywood bond strength.
在不同湿度养护环境下，测试沿单轴方向传湿的混凝土试件内不同部位处相对湿度变化情况。
The internal RH-change of concretes with one-dimensional moisture transported was measured, in different RH curing environment.
试件制作及粘接强度测试：每个试件由两个合金铸件粘接而成。
Making of specimens and measurement of shear bonding strength(SBS): Each specimen was composed of two kinds of casting.
本机系用来测试皮革、橡胶、布等材料之耐揉性，施荷重兴试件上、夹具间距离及往复距离均可调整。
This machine is to test the crease-flex abrasion resistance on leather , rubber clothes . the force loaded on specimen , distance between grips and the two-way distance can be adjustable .
本机系用来测试皮革、橡胶、布等材料之耐揉性，施荷重兴试件上、夹具间距离及往复距离均可调整。
This machine is to test the crease-flex abrasion resistance on leather , rubber clothes . the force loaded on specimen , distance between grips and the two-way distance can be adjustable .
应用推荐