重点阐述了该项技术在汽车曲轴上的应用。
The application of this technology in the automotive crankshaft was discussed.
汽缸内产生爆炸，把活塞向下推动，活塞连着连杆，连杆又连着汽车曲轴。
There is an explosion in the cylinder. The explosion pushes the piston down. The piston is attached to a rod. The rod is attached to the crankshaft of the car.
没有他们的移动设备将是手机少很多，我们可能仍然是我们的汽车曲轴开始。
Without them our mobile devices would be a lot less mobile and we might still be crank starting our cars.
一种曲轴法兰与齿圈装配的自动定位夹具，用于汽车曲轴法兰与齿圈自动装配机。
An automatic positioning clamp for assembling a crankshaft flange and a tooth ring is used for an automatic assembling machine for the automotive crankshaft flange and the tooth ring.
日本东北部，被地震和海啸摧毁的南三陆町市。人们在一个加油站边运行一个脚踩曲轴泵给汽车加油。
Men operating a bicycle crank pump refuel cars at the site of a gas station in the earthquake- and tsunami-destroyed town of Minamisanriku, northeastern Japan. (AP Photo/David Guttenfelder)
当大电流流过汽车启动机的线圈时，可以产生足以让发动机曲轴转动的力矩。
An automotive starter motor has many conductors and USES a lot of current to create enough rotational force to crank the engine.
其燃烧过程产生的巨大力量的推动着活塞向下运行，带动曲轴而产生推动汽车的动力。
The combustion process pushes the piston down the cylinder with great force turning the crankshaft to provide the power to propel the vehicle.
汽车发动机曲轴是汽车动力装置的核心零件之一，其制造质量要求很高。
The motor car engine crank is one of automobile power unit core components, Its manufacture quality requirement is very high.
本文提出了汽车发动机曲轴多工况可靠性优化设计方法。
A fatigue reliability optimum design method for automotive engine crankshaft under various operation modes is presented.
发动机曲轴箱和气缸体通常铸造成为一体，因此算作汽车中最大且最复杂的金属结构。
The engine crankcase and block are usually cast into one piece and therefore can be seem as the largest and most intricate piece of metal in automobile.
汽车内泄漏污染物的四个位置是燃油箱、化油箱、曲轴箱和尾管。
The four places in the automobile from which pollutants can escape are the fuel tank, carburetor, crankcase and tail pipe .
发动机活塞、连杆和曲轴将这种压力转换为运动，从而推动汽车行进并使其他系统运行。
The engine piston, connecting rod and crankshaft convert this pressureinto motion for moving the car and operating other systems.
本文简要介绍了汽车发动机曲轴常见的失效形式，分析了各种失效形式可能的原因。
The main failure forms of the automobile engine crankshafts were presented and their possible causes were analyzed.
而曲轴，在齿轮箱挂挡时，又使汽车持续运动。
When the gears are engaged, the crankshaft keeps the car moving.
通过宏观分析、断口分析、化学成分检验、金相检验和力学性能检测等方法，对汽车发动机曲轴断裂原因进行了分析。
The analysis of automobile engine crankshaft was conducted by macroscopic examination, fracture analysis, chemical composition analysis, metallographic examination and mechanical properties test.
分析了汽车维修中曲轴、飞轮、传动轴、车轮、轮胎等旋转零件进行平衡试验的重要性。
In this paper the author emphasizes the importance of balancing the rotating parts, such as crankshaft, flywheel, propeller shaft, wheel and tyre, etc. during automobile repair.
汽车发动机活塞，所有连接到一个单一的曲轴。
In automobile engines, all pistons are attached to a single crankshaft.
霍尔叶片传感器主要用于检测汽车发动机曲轴位置和转速，此外还可用于检测无刷电机磁极位置及测速等。
The Hall-effect vane sensor is to be primarily used to sense the angle position and the speed of the crankshaft of the automotive engine, in addition to be used in brushless DC motors.
传统的曲轴淬火层深度测试方法是金相抽检，不能满足汽车工业生产需要。
Sampling examination by metallographic test was the traditional method for measuring the depth of the quenched layer in crankshaft, which could not meet the needs of the production of auto industry.
介绍了并联逆变式IGBT变频电源的工作原理及在汽车发动机曲轴淬火上的应用情况。
The working principle of the parallel contravariant IGBT variable frequency power supply and its application in the quenching process of engine crankshafts are introduced.
曲轴是汽车发动机和其他内燃机的关键零件，需求量大，种类众多，加工精度要求高。
The crankshafts are the key components for automobile engines and other internal-combustion engines, they are in great demand, various in kinds and strict demands for precision.
曲轴转动，动力传动系统将发动机的转动运动传给汽车车轮，从而使车轮及整车转动起来。
The crankshaft is thus made to rotate; the rotary motion is carried through the power train to the car wheels so that they rotate and the car moves.
汽车内泄漏污染物的四个位置是燃油箱、化油箱、曲轴箱和尾管。
The four places in the automobile from which pollutants can escape are the fuel tank, carburetor, crankcase and tail pipe.
以东风汽车公司生产6102d_2球铁曲轴为例，基于本文的研究成果所开发出的曲轴滚压校直系统在国内具有很好的应用价值。
The crankshaft Rolling and Alignment System by applying this research result is very useful, using Dong Feng Motor Company 6102d 2 crankshaft produce as an example.
所有现代制造的汽车发动机，都需要装备控制曲轴箱有害污染的曲轴箱强制通风系统。
All automobile engines now built are equipped with the positive-crankcase ventilation system of crankcase emission control.
根据往复式内燃机工作的本质特征，选择了与传统时间域及频率域不同的曲轴角度域及频率域，对汽车发动机的瞬时转速波动进行了划分。
According to the basic characteristics of internal combustion engines, crank Angle domain and its frequency domain were chosen, and engine momentary speed fluctuations were divided.
进口汽车的曲轴价格昂贵，磨损后在没有配件的情况下可采用电刷镀技术来修复。
Since a spare part of crankshaft of an imported motor vehicle is very expensive, a worn crankshaft can be rehabilitated by brush-plating if there is no spare part.
曲轴箱缸体是汽车中最大、·最复杂的金属件，一般由优质合金铸铁制成，以增强其耐磨性。
They are usually made of high-grade cast alloy iron to improve wear characteristics of the cylinder.
内燃机曲轴是是汽车、火车、船舶等交通运输设备的动力装置的关键零件之一。
Crank of internal combustion engine is one of key components of powerplant of motor, train, ship and so on traffic equipment.
内燃机曲轴是是汽车、火车、船舶等交通运输设备的动力装置的关键零件之一。
Crank of internal combustion engine is one of key components of powerplant of motor, train, ship and so on traffic equipment.
应用推荐