其中，微湍流发生器设计是关键，其直接决定了水力式流浆箱的工作性能。
Thereinto, the design of micro-turbulence generator is crucial to the performance of the hydrodynamic headbox.
介绍了景洪水电站水力式升船机塔楼模型试验的有关情况，主要从静力试验的角度进行分析研究。
The model experiment of hydraulic ship lifter tower of Jinghong Hydropower Station is described from static aspect.
阿布扎比正在考虑实施一项具有里程碑式意义的水力发电和碳捕获工程。而今年二月的一份公告中称，决策的最终时间又向后延迟了18个月。
A decision on whether to proceed with a landmark hydrogen power and carbon capture project in Abu Dhabi was postponed by 18 months in a February announcement.
帆船拖动由水下翼状式叶片组成的二个水力发电机，叶片摆动是借助水流过的冲力。
The ships would tow hydropower generators consisting of two wing-like underwater blades that would be made to oscillate by the force of the water as they plough through it.
雨水斗应采用经水力测试的虹吸式雨水斗，且带有防涡流装置。
Rain bucket should be tested by hydraulic bucket siphon rain, and with the anti-eddy current device.
通过分析研究和水力模型试验，提出了窄缝式挑坎最大动水压强的估算式。
The estimation formula for slit-type buckets maximal pressure intensity is given through analysis and hydraulic model test.
该模型可用于分析压水堆核电厂U型管自然循环式蒸汽发生器的热工水力瞬态过程。
This model can be used to analyze thermal-hydraulic transient behaviour of inverted U-tube steam generators in PWR power plants.
泥泵是水力输送式挖泥船的关键设备。
对比常规的底流消能工，对跌坎式底流消能工消能水力特性进行了分析和试验研究。
Comparing with the routine bottom-flow dissipation, we have tested and analyzed the hydraulic property of the falling-sill bottom-flow dissipation.
结合沙牌等工程对旋涡式竖井溢洪道的水力学特性进行了试验研究。
In combination with Shapai and Wawushan projects, the hydraulics 'characteristics of vortex shaft spillway have been tested and studied.
对光滑溢洪道、阶梯溢洪道和前置掺气坎式阶梯溢洪道水力特性进行了对比研究。
The hydraulic characteristics of the smooth spillway, the stepped spillway and the pre-aerator stepped spillway have been studied respectively.
本文主要针对目前磨料微粉分级存在的困难，自行研制了垂直式多级水力分级装置来实现磨料微粉的窄粒级分级。
Aiming at the problems exiting in grain classification at present, a vertical multistage waterpower device was developed to realize abrasive narrow-grade-classification.
通过对PLW- 8型旋涡式屏蔽泵的设计及试验研究，介绍了该类型泵的水力设计及结构设计，总结了设计要领，并将一些重要参数对泵性能的影响做了探索。
Through the design and experimental research of PLW-8 peripheral canned pump, the hydraulic design and structural design of this type of pump are introduced and the design main points are summarized.
应用水力学基本原理，探讨了在丁坝影响下支汊分流比的计算，得到(12)式，由(12)式计算的支汉分流比与实测值基本吻合。
The calculation of branch diversion was explored in the condition with a dike, and the equation (12) was given, by using basic theory of hydraulics.
但因卷盘式喷灌机仍存在一些缺点，如单喷头卷盘喷灌机耗能较高，水力损失较大等，所以卷盘式喷灌机的优化设计显得尤为重要。
But there are also some disadvantages in it, for example, single sprinkler hard hose traveler waste much energy, hydraulic losses are large, so optimize design of it become especially important.
第二是说明分压式线性传感器及其测试系统在柴油机水力测功器磅秤读数P（公斤）测量上的应用。
The second is the application of this sensor which is used for measuring the parameter P (kq) of Diesel.
本文拟采用一维显式差分方法来计算河口水力要素。
This paper draw up a Plan to adopt one-dimensional Splace display decompose to calculate the hydraulic factors in the river mouth.
对虹吸式放水管的计算方法进行探讨。提出了虹吸式放水管的水力计算简便方法。
This paper discusses calculation method of drawing water pipe as siphon, and proposes easy method of hydraulic calculation of pipe to let water out as siphon.
水力参数和磨料参数对前混式磨料射流切割套管的效率有着极重要的影响。
The hydraulics and abrasive parameters of premixing jet has great effect on casing cutting efficiency.
建立了套管管束式换热器的计算模型，以便进行该种换热器热工水力学设计计算和结构优化。
An analytical model of thermal-hydraulic design and structural optimization was developed for a double-tube bundle heat exchanger of an integrated nuclear reactor.
通过水力学模拟试验对铸造铝合金过滤流动过程进行了分析，建立了过滤效率的水力学模拟试验关系式。
The analysis of filtering flow process of aluminum cast alloy based on hydraulic simulation was carried out. The filtering efficiency formula was established.
由斜式进水流道模型水力特性试验得到了进水流道的水力损失和出口流场的分布，分析了进水流道出口流场对水泵及其装置性能的影响。
Based on the hydraulic model test of an oblique inlet passage, the hydraulic loss coefficient and distribution of the outlet velocity of the inlet passage are obtained in the paper.
与机械搅拌式水力分级机比较，高度较小，便于配置。
With mechanical agitation hydraulic classifier comparison, a high degree of small, easy to configure.
IFZ型无堵塞泵螺旋式叶轮的不平衡量对泵的水力性能有重大影响。
The imbalance weight of impeller of IFZ screw non-clogging pump has great effect on hydraulic performance of pump.
闭式结构叶轮：采用优秀的水力模型，效率高，抗汽蚀性能强。
Closed structure impeller: adopt excellent hydraulic mode efficient, highly resistant to capitation erosion.
主要介绍了二次沉淀池淹没式穿孔出水管的水力计算方法。
The hydraulic calculation of perforated outlet pipe of secondary sedimentation thank has been presented in this paper.
文章介绍一种用于从河底吸取泥砂并且有自吸排气的离心式多相流泵的结构及水力设计。
This paper introduces the structure and hydraulic design of the multiphase flow centrifugal pump, which draught sands from the riverbed and discharge the air of the suction pipe.
在常规脱油型水力旋流器的基础上，通过结构设计制成气携式液-液水力旋流器，旨在提高其除油效率。
On the basis of the normal de-oiling hydrocyclone, the air-injected hydrocyclone was manufactured by structural design for the purpose of enhancing the de-oiling efficiency.
干式排渣系统，可解决水力排渣存在的问题，并能产生新的技术效果。
The dry bottom ash discharging system can solve these problems effectively and create new technological effects.
干式排渣系统，可解决水力排渣存在的问题，并能产生新的技术效果。
The dry bottom ash discharging system can solve these problems effectively and create new technological effects.
应用推荐