使用2-3“直径氯丁橡胶绝缘管或聚丙烯管。
Using the 2-3" diameter Neoprene or Polypropylene pipe insulator tubes."
硅橡胶绝缘和护套电缆应不小于电缆外径的4倍。
It is not less than 4 times the outer diameter of the cable for silicone rubber insulated and sheathed control cable.
氯丁橡胶绝缘垫圈和全部环氧树脂密封，提供真正的无芯电缆连接。
Neoprene grommet and complete epoxy encapsulation provide for a true non-wicking cable entry.
硅橡胶绝缘化合物性质柔软圆滑可抵抗具有许多绝缘系统的塑性流动。
Silicone rubber insulation compounds are inherently soft and pliable and resists the plastic flow that characterizes many insulation systems.
与电线四周围的橡胶绝缘层相类似，髓鞘环绕着发送信息的轴突，保护和加快着电脉冲。
Like rubber insulation around electrical wires, myelin wraps around message-sending axons, protecting and speeding electrical impulses.
氯丁橡胶绝缘垫圈和全部环氧树脂密封，提供真正的无芯电缆连接。不需要另外配置绝缘电缆盒。
Neoprene grommet and complete epoxy encapsulation provide for a true non-wicking cable entry. An isolating cable chamber is not needed.
电线不能相互接触，必须包上橡胶层绝缘。
The wires must be insulated from touching each other with a rubber covering.
橡胶被用来使电线与外界绝缘。
最理想的是它能在溶剂里溶解成为绝缘漆，但又能像橡胶那样具有可塑性。
Ideally it would be some-thing that would dissolve in solvents to make insulating varnishes and yet be as moldable as rubber.
绝缘层一般为纯天然橡胶，铜丝为无氧铜，这样，才能保证线芯的良好导电性及电缆的安全性。
The insulating layer is pure natural rubber, copper wire for copper, so, in order to ensure the safety of wire and cable of good conductivity.
优秀的电绝缘性能，固化后形成高强度的柔性橡胶体，保护组件免受机械震动及外力冲击。
Cured flexible rubber has good performance in electrical insulation to protect the module free from machinery vibration and out force impact.
所述的带有弹性的绝缘套管采用硅胶套管、橡胶套管或塑料套管。
The insulating sleeve with the elasticity adopts a silicone tube, a rubber sleeve or a plastic sleeve.
通过丁烯和异戊二烯的共聚作用化合而成的一种合成橡胶，几乎不透空气，用作轮胎、内管道和绝缘等的材料中。
A synthetic rubber produced by copolymerization of a butylene with isoprene, nearly impermeable to air and used in tires, inner tubes, and insulation.
硅橡胶柔韧带状电缆以多股圆铜导线生产因此与硅橡胶单独绝缘。
SiliFlex Ribbon Cable is produced from high strand round copper conductors that are individually insulated with Silicone rubber.
靴底有轻质双层密度橡胶使靴底直接绝缘。
Insulation in the sole of the boot is provided by lightweight dual density direct rubber soling.
用途：可作涂料、油漆、油墨、橡胶、塑料、绝缘带的填充剂。
Usage: can be used for coatings, paints, inks, rubber, plastics, insulation filler zone.
一种以向天然橡胶中充气并保存气体的方法制成的轻巧、结实、多孔的橡胶。它的用途很广，包括室内装修和绝缘。
A light, firm, spongy rubber made by beating air into latex and then curing it. Foam rubber has a wide range of USES including upholstery and insulation.
橡胶因为具有高弹性和绝缘性，常被用来制作轮胎、减震器、密封圈和电绝缘材料。
Because of its high elasticity and electric insulation, rubber can be used in making tires, shock absorbers, airproof loops and electric insulation.
本发明提供一种即使提高介电常数而绝缘特性也不降低的高介电常数橡胶组合物和电力电缆构件。
The present invention provides one kind o high-dielectric constant rubber composition with raised dielectric constant and no-degraded insulation characteristic and power cable member.
橡胶由于具有高弹性和绝缘性，常被用来建造轮胎、减震器、密封圈和电绝缘原料。
Because of its high elasticity and electric insulation, rubber can be used in making tires, shock absorbers, airproof loops and electric insulation.
最好采用合成聚合物电线，这种线的绝缘性与橡胶一样。
Make use of modern synthetic polymers have the same insulating properties of rubber.
医生相信，纳达之所以遭遇雷击而没有死亡，是因为她脚上穿着绝缘的橡胶底鞋子，而闪电电荷对纳达的心脏进行电击后，使之恢复了正常。
The doctors said Nada's rubber-soled shoes had saved her life. They believe the force of the electricity jolted her heart beat back into a regular rhythm.
丁基橡胶胶乳是电线、电缆及涂层织物和复合材料的极好绝缘材料。
In latex form it is an excellent insulating material for wires and cables, as well as for coating fabrics and composites.
工作地点潮湿时，地面应铺有橡胶板或其他绝缘材料。
In damp working places, the ground should be covered by rubber sheets or other insulating materials.
介绍了在一定用途的绝缘聚合物上加适量导电填料（导电炭黑）生产导电塑料与导电硅橡胶弹体等导电聚合材料的方法。
The method to produce the polymerized material such as conductive plastic and conductive silicon rubber by adding the conductive material (mainly the carbon black) is introduced.
广泛用于油墨、胶粘剂、工程塑料、改性橡胶、电器绝缘件 中。
They are widely applied in printing ink, adhesive, engineering plastic, modification rubber and electrical insulating components.
经调查，大管径绝缘接头的缺陷主要表现在焊接高温对橡胶密封材料的损伤方面，这会使刚已经生产完成的绝缘接头变成废品，浪费资源。
According to the research the main question is that the high temperature of the welding make rubber seal O-ring spoiled, the insulating joint become waste product.
经调查，大管径绝缘接头的缺陷主要表现在焊接高温对橡胶密封材料的损伤方面，这会使刚已经生产完成的绝缘接头变成废品，浪费资源。
According to the research the main question is that the high temperature of the welding make rubber seal O-ring spoiled, the insulating joint become waste product.
应用推荐