• 搅拌物倒入模具放入烤箱6- 7分钟

    Pour batter into molds and bake for 6 to 7 minutes.

    youdao

  • 罐子当作模具,将报纸包裹在其外面然后将多于的部分底部

    Use the jar as a mold and wrap the newspaper around the jar, then fold the tails into the base.

    youdao

  • 海里用泥土建成小岛花岗岩制成模具支撑在上面,桥墩灌注完成以后下面的泥土炸掉

    In order to do that little islands of soil were formed; then the piers were sunk into granite and then blasted.

    youdao

  • 冰棒模具拿出来时,要用水冲个几秒钟模具分开

    To remove the pops from their molds, run them under cool running water for a few seconds to loosen them.

    youdao

  • 获得我想要的形状之后,模型了石膏,从而创造一个凹面模具

    After achieving the desired shape, I cast my model in plaster to create a concave mould.

    youdao

  • 30分钟之后模具拿出来,并模具翻转过来轻轻的或者原来的模具底,让月饼脱离模具

    Then, turn the mold over and very gently press or tap the top to remove the mooncakes.

    youdao

  • 粘土好之后,需要好些慢慢干掉从而模具里拿出来时候能够足够坚固,并保持着形状

    When the clay was in place, it had to slowly dry for a few days to get firm enough to keep its shape when I took it out of the mould.

    youdao

  • 1905年,11岁的弗兰克·易普森(Frank Epperson)他的苏打制作模具在外面了一整夜

    In 1905, eleven-year-old Frank Epperson left his soda-making tools outside overnight.

    youdao

  • 然后出来剩下融化巧克力摊到模具顶端并用黄油抹平

    Then take out, spread the remaining melted chocolate over the top and smooth with a butter knife.

    youdao

  • 这个项目最后期限越来越了,所以加快速度,空气模具干。

    The deadline for the project was getting closer, so I tried to speed up the drying of the mould with hot air.

    youdao

  • 就是通常人们模子比如电视机电话机外壳塑料桶商品塑料加热软件注进模具冷却成型生产出来的。

    It is usually said mold, such as TV sets, telephone shell, plastic barrels and other commodities, the plastic injection molding mold cooling heating software produced.

    youdao

  • 本文介绍了国内首次CAD/CAM技术全面地应用注塑模具设计制造过程及其取得的良好技术经济效益

    The first successful application of CAD/CAM technology in plastic injection mold design and manufacturing in China and the technical and economic benefit are introduced in this paper.

    youdao

  • 我们我们市场定位生产销售模具架,零部件产品

    We bring our market position in the production and sale of mold, mold, parts and components products.

    youdao

  • 介绍液态模锻液压机成形自行车接头模具特点成形方法。液态模锻可得到优质美观的接头。

    This paper introduces the characteristics of mould and forming methods of forming bicycle handlebar by liquid forging hydraulic pres. The liquid forging can form high quality handlebar.

    youdao

  • 这个机器通过大斧模具旋转360巧克力防止生成气泡

    This machine turns the molds a full 360 degrees on two axes, and vibrates the chocolates to prevent the formation of air bubbles.

    youdao

  • 块塑料复合材料板材加热模具制作零件的方法。

    You take a plastic or composite sheet, heat it up, and press it into a mold to make a part.

    youdao

  • 准备火鸡沙拉灯笼椒碎多余的水分挤出混合所有材料模具做成适当的大小形状

    Prepapre Turkey salad: Squeeze minced capsicum to remove excess juice. Mix all ingredients and make into desired shape with mould.

    youdao

  • RT就是各种方法RP原型转换成模具技术

    RT changes RP prototype into the technology of the tool and mould with various kinds of methods.

    youdao

  • 尽可能地收集的碎片做成粉浆加水然后风干放进模具然后就能重新得到粉笔但是不能简单起来

    You've got to pretty much take that chalk, and make a slurry out of it, put water, and dry it back up, put in a mold, and then you can have the chalk again, but you can't just glue it back together.

    youdao

  • 作用好的面粉放入本机,模具成型

    Function, Stir the flour into the good, the first three pierced mould shape.

    youdao

  • 近期上市产品之一风火轮车模(HotWheelsCar)制造机。它能孩子们融化注入一个车身模具,自己做出车模。

    One of his most recent projects to hit the shelves is the Hot Wheels car Maker that lets kids inject melted wax into a car body mold.

    youdao

  • 铺放就是通过使用压紧头按照一定规律纤维束或纤维直接模具表面

    Placement techniques is place the fibers or tape on the surface of tool in accordance with some regulations, through directly compaction pressure provided by compaction roller or shoe.

    youdao

  • 曾经削减所有舱壁使他们准确的,我他们重新融入室温硫化模具使用除冰边缘,使形状完全符合内部船体

    Once I cut all the bulkheads, to make them accurate, I placed them back into the master RTV molds and used icing on the edges to make the shape conform perfectly to the inside of the hull.

    youdao

  • 台湾塑料大王王永青先生旗下子公司我们厂作为塑料模具供应商技术给予我们极大的肯定

    We are the plastics moulding supplier for the filiales of "the king in plastics" in Taiwan king Mr Wang Yongqing. And he gives us the biggest positive words about our technology.

    youdao

  • 台湾塑料大王王永青先生旗下子公司我们厂作为塑料模具供应商技术给予我们极大的肯定

    We are the plastics moulding supplier for the filiales of "the king in plastics" in Taiwan king Mr Wang Yongqing. And he gives us the biggest positive words about our technology.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定