提出系统标定方法,完成系统标定实验。
The calibration method is proposed and our system calibration experiment is accomplished.
标定实验和野外观测结果与理论计算相符。
Results of numerical computation agree with actual calibration tests and field observations.
利用双通道检测方法设计了可见光光强计标定实验平台。
Visible light intensity meter calibration experiment platform is designed to take advantage of dual-channel detection method.
通过动态标定实验,得到不同幅值的阶跃输入、输出数据。
Through the dynamic calibration experiments, the step input and output signals with different amplitudes are obtained.
本文简要介绍了所研制的红外辐射式体温计的构成及标定实验方法;
The formation of infrared radiation human body thermometer and the method of calibration experiment are introduced.
标定实验结果显示,标定后的测量精度可以满足测量臂的精度要求。
Calibration results show that measurement precision after calibration meets the precision requirement of the measuring arm.
通过对该系统的标定实验表明,实际位移与所测得的位移呈线性关系。
Calibration tests on the system show there is a linear relationship between the actual displacement and the measured displacement.
研究了摄像机非共面标定方法,完成单目立体视觉传感器的标定实验;
Studying the non-coplanar camera calibration method and completing the calibration experiment.
在发动机实验台上,采用比较法对EGO传感器进行了稳态标定实验。
The static state models of an EGO sensor were obtained by using piecewise polynomial method and nonlinear regression analysis method based on available experimental data.
根据动态标定实验数据,分析了负载变化对腕力传感器动态特性的影响。
The loading effect on dynamic characteristic of wrist force sensor is investigated in accordance with the dynamic calibrating experimental data.
该方法扩大了标定实验平台对光源的选取范围,提高了自制仪器的性能。
This method expands the selection of the light source of the calibration experiment platform, and improves the homemade instrument's performance.
光度标定实验表明:该相机的数字输出线性度好,可用于获取所需要的图像。
Luminosity calibration experiment proves the good linearity of the camera's digital output, and it can be used to obtain the required images.
最后,对解调系统进行了标定实验,并通过两个不同腔长的传感器进行了连续拉伸、卸载实验。
Lastly, the calibration experiment of demodulation system is carried out, and the continuous stretching and unloading experiments of sensors with different cavity length.
通过大量实流标定实验,分析了煤气导热系数对标定结果的影响,并提出了一种新的补偿方法。
Based on lots of the actual process gas flow calibration experiments, and the analyses of the affection of thermal convection modulus, a new compensating method is proposed.
多次标定实验表明,此方法有较高的精度,操作既方便又安全,可节约核燃料,减少放射性污染。
The operation is easy and safe, the accuracy of this method is higher than that of other methods, the nuclear fuel consumption as well as the radioactive contamination is low.
方法:文中简要阐述了该仪器的具体结构设计,给出了实验室标定实验和管道验证实验的实验数据;
Materials and Methods This paper brief describes the concrete design of the instrument, also lists the technical data obtained in the lab and experimental detection verified through pipeline;
最后,研究了传感器的静态标定原理,并对传感器进行了静态标定实验,得到了传感器的标定实验解耦矩阵。
Finally, principle of the sensor calibration is analyzed, and the sensor coupling matrix is calculated according to the data of the static calibration experiment.
针对四缸四冲程汽油发动机,建立了合理的发动机数学模型,并对模型发动机进行仿真标定实验,获得喷油MAP图。
An engine model was established for the 4 cylinder 4 stroke gasoline engine. And the fuel MAP of the mode engine was obtained by scaling experiment.
本文研究的主要内容如下:首先,在自行设计的歧管绝对压力(map)传感器标定实验台上,对传感器进行了静、动态标定。
This dissertation mainly about: Firstly, the static and dynamic calibration experiment of MAP sensor was completed on a calibration experiment stage which was designed by us.
分别利用恒温箱和悬臂梁完成了系统温度灵敏度和应变灵敏度的实验标定。
The sensitivities of temperature and strain are calibrated by calorstat and cantilever beam separately.
经过实验已验证了标定方案设计以及数据处理算法的可行性。
Both the design of the calibration scheme and the feasibility of the data processing algorithm are identified through experiments.
实验结果表明,虚拟环境标定系统达到了较高的定位精度,可以满足遥控焊接过程中局部自主焊接准备工作的需要。
The experimental results show that the system can obtain a high localization precision to meet the requirements of preparation for locally autonomous welding during remote welding process.
通过对测力仪做标定,分析标定结果,并分析实验误差给出了软件系统的可靠性。
By way of doing the demarcation to surveying the power apparatus, the result is demarcated in the analysis, and analyses the experimental error and has given out the reliability of software system.
协助分析员确保做好研究中心实验设备的维护和标定。
Ensuring the maintenance and calibration of laboratory equipments under the research centre in collaboration with the analysis staff.
并通过实验标定ASE光源谱特性解调应变灵敏度系数。
The strain sensitivity was demarcated by experiment using spectrum character of ASE demodulation.
并通过实验标定ASE光源谱特性解调应变灵敏度系数。
The strain sensitivity was demarcated by experiment using spectrum character of ASE demodulation.
应用推荐