用于标准系统双值和单值压力测量仪器，是为了满足带有压缩空气式制动器车辆压力测量，而专门研发的。
The double and single pressure measuring instruments in the standard systems were developed specially for the measurement of pressure in vehicles with a compressed air brake.
相反，抽象的基准，只测试CPU或GPU的，一个真实的世界标准适用于用户的共同任务，以测量系统的性能的特定功能。
Contrary to abstract benchmarks, which only test specific functions of CPUs or GPUs, a real-world benchmark applies a user's common tasks to measure a system's performance.
主要介绍一种测量标准时间的新型高精度测量系统，详细阐述了它的测时原理、硬件结构和软件设计。
A new high-precision standard time measurement system is introduced. The hardware structure and software function of the system is presented in detail.
用于标准系统双值和单值压力测量仪器，是为了满足带有压缩空气式制动器车辆压力测量，而专门研发的。
The double and single pressure measuring instruments in the standard systems were developed specially for the measurement of pressure in vehicles with a compressed air brake .
系统的设计开发严格的按照国家的测量行业标准，保证了数据的准确性，有效性。
Systems design and development are in accordance with strict national measurement industry standards, ensuring data accuracy, effectiveness.
试验研究表明，本文提出的检测方法和系统对针尖的长度和直径测量精度均达到纺织部技术标准。
The experimental study has shown that, with the measuring method and system presented in the paper, the measuring precision of length and diameter all come up to technical standard.
最后简要指出用比较法测量一个量值与标准电容相差较大的电容时，产生系统误差的原因。
Finally in brief the causes are stated of the occurrence of system error in measuring a measured value which is different from the standard capacitance by comparative method.
采用经钨带灯标准光源标定的多道石英光纤光学系统，测量了HL-1装置等离子体可见光波段轫致辐射功率的径向分布。
Using a multichannel quartz optical-fiber system calibrated with a standard tungsten strip lamp, the radial profiles of the visible bremsstrahlung radiation power in the HL-1 tokamak were measured.
结论：左上臂使用夹板制动后，采用标准路段及评分系统测量驾驶表现显著变差。
Conclusions Driving performance as measured with a standardized track and scoring system was significantly degraded with splint immobilization of the left arm.
本文介绍分布式工业过程测量与控制系统(IPMCS)中的功能块IEC61499标准的体系结构。
This paper introduces the architecture and characteristics of IEC61499standard, function blocks for dis-tributed industrial-process measurement and control system (IPMCS).
在自行设计的动态误差实验系统中，同步采集标准信号（电机脉冲数）和测量信号（光栅脉冲数），实时比对分离出动态误差。
In a self-designed dynamic error experimental system, the standard signal (motor pulses) and the measured signal (grating pulses) were collected synchronously, and isolated the dynamic error.
该系统通过JFD-301校准脉冲发生器对标准波形进行校准及比较法，可测量出局部放电的视在电荷量。
Owe system the amounts adjusting a circuit carrying out calibration and comparison method on standard wave form , may measure out part discharging looking at in electric charge by JFD-301.
整个软体是菜单式的，重点介绍了色品坐标和亮度测量的软体，包括标准输入、系统定标和测量子程序。
The interface of the sofyware is menu - styled. the components that deal with color and luminous density measurement, including standard input, system calibration, are emphasized.
新的国际标准体系中提出以认证、比对的手段考核冲击电压测量系统的不确定度。
The uncertainty of impulse voltage measurement as a checking means for authentication and comparison is suggested in the new international standard system.
用所设计的测量系统实测了标准空气电容器的电压系数，给出了测量结果及不同电压下的不确定度。
The voltage coefficient of a standard air capacitor was measured by the designed measuring system. The results and uncertainties under different voltages are given.
所述测量系统由电压传感器、电流传感器和标准电能表构成；
The measurement system comprises a voltage sensor, a current sensor and a standard electric energy meter.
又以标准圆柱体作为测量实例，证明了测量系统测量的准确性。
And the standard cylinder is also measured. The measurement proves the veracity of the system measurement.
通过对光学干涉系统结构设计和元件参数选择，最大限度地优化了干涉条纹的可见度，并设计出零背景光强标准硅球直径精密测量系统。
On the basis of structure design of optical system and parameter option of optical components, the visibility of interference fringe with zero background intensity is optimized.
通过标准气体实验证明了该系统对气体浓度测量的准确性和稳定性，具备实际应用能力。
Serials of standard gas experiment show that the measurement system can fulfill the requirements of the on-line measuring for vehicle exhaust with a proper measurement accuracy and stability.
介绍了引进的ABB板形测量、控制系统的测量控制及思想，并总结了板形标准曲线的意义及控制信号的提取过程。
In the paper the ABB shape measurement-control system and its control principle are introduced, the shape standard curve meanings are expounded and the extractive process of the signals are described.
有些用于补偿检测系统非线性误差的数据，通常是借助外接仪器测量待检品标准量电压的方法来获取的。
Some compensation data for nonlinear error in metrical system is normally acquired from the measurement of tested the standard voltage by external equipments.
测量系统分析(msa)是QS 9000标准中的核心要素之一。
Measurement System Analysis (MSA) is an element job required by QS9000.
利用TWAIN标准对原植物叶片面积测量系统进行了改进，使其可以直接从支持TWAIN标准的数字化图像输入设备读取图像数据。
Using TWAIN standard, the leaf area measurement system is improved so that image data can be read directly from digital image equipment.
提出了建立校验系统可信赖标准通道的方法，并利用不确定度理论对校验系统的测量结果进行评定。
This paper proposed a method to establish the reliable standard channel for the calibration system and used the uncertainty theory to evaluate the uncertainty of the measurement results.
系统地分析了容重器的容积测量结果标准不确定度的影响因素，并进行了较详细的评定。
The influential factors of the standard uncertainty are analysized systematically and evaluated in detail to the volume of the volume-weight instrument.
为了验证噪声检测系统的精度和可靠性，在半消声室和普通房间内，分别对标准声功率源和小型电机作声功率对比测量试验。
To verify the accuracy and reliability of the system, contrast tests on reference sound power source and small motor are performed respectively in a semianechoic chamber and a common room.
介绍了一种用常规的自然热电偶和标准热电偶方法实现高速加工过程中切削温度的直接接触式测量的计算机辅助测温系统。
A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples.
介绍了一种用常规的自然热电偶和标准热电偶方法实现高速加工过程中切削温度的直接接触式测量的计算机辅助测温系统。
A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples.
应用推荐