本文用有限分析方法，对带有倾斜基座的CVD反应器内流场进行了数值计算。
Using finite analytic solution we gave the numerical computation of the flow field in CVD reactor with tilted susceptor.
本文给出了一种求解闸坝地基恒定与非恒定有压渗流的边界拟合坐标有限分析方法。
A boundary fitted coordinate Finite Analytical Method (FAM) is described for the numerical solution of steady and unsteady seepage flow with pressure in foundation of sluice and DAMS.
本文将有限分析方法用于曲线座标系上紊流N- S方程数值计算，研究了高雷诺数时叶栅粘性紊流流场。
The finite analytic method is used in the present study to calculate the turbulent flow field described with Navier-Stokes equations in body-fitted curvilinear coordinate system.
计算采用了混合有限分析方法离散控制方程，物理变量采用交错网格布置，用SIMPLEC算法求解离散方程。
The control equation was discredited by the Hybrid Finite Analytic method with the physical parameters arranged on a staggered grid. The discretized equations were solved by SIMPLEC method.
对二恶英进行化学量化分析需要非常先进的方法，世界上只有数量有限的几个实验室能够做到。
The quantitative chemical analysis of dioxins requires sophisticated methods that are available only in a limited number of laboratories around the world.
利用传统的分析方法并研究图1中的图表，我们只能得出以下有限的结论。
Using a traditional analysis approach and studying the graph in Figure 1, we can only arrive at the following limited conclusions.
条分法和有限元法是土质边坡稳定分析的主要方法。
Slice method and finite element method are principal methods of soil slope stability analysis.
自适应有限元方法在实际工程问题的分析中有重要的应用价值。
Self adaptive finite element method has its important application value in the analysis of practical engineering problems.
为了消除这种计算误差，出现了有限元接触分析方法。
To avid this computational error, it comes forth finite contact elements analysis method.
针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
Considering characteristics of grotto relics the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
在完成过程中，充分考虑了铺设轮的机械设计要求，采用了计算机辅助仿真设计、有限元分析和试验校验的方法。
In the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
在对厦门管制区的优化结果进行分析的基础上，提出了基于有限元的优化方法。
We analyze the optimum result of Xiamen control airspace and put forward optimal algorithm based on the Finite Element method.
该文利用有限元方法分析热轧车轮周围空气温度场，计算得到相应测位空气折射率的线形分布规律。
Air temperature distribution is analyzed with a finite element method. Linear distribution of refractive index is calculated for certain measurement positions.
根据ANSYS提供的适合导管架平台的单元的特点，归纳出进行导管架平台结构有限元分析的基本过程和基本方法。
According to the characteristics of the unit suit for jacket platform provided by ANSYS, concluded a essential process and method for the jacket platform construction analysis with ANSYS.
采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。
The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
提出将响应面方法和非线性有限元分析结合起来对桥梁上部结构的体系可靠度进行分析的新方法。
A new method aiming to incorporate the response surface method into the computation of system reliability for composite Bridges is proposed in this paper.
有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging.
为了测斜仪技术检验监测结果的准确性，采用有限元分析方法计算静压桩与土的相互作用效果。
To examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
采用有限元方法，建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
讨论轿车乘坐室声学模态的有限单元分析方法。
This paper presents acoustic modes finite element analysis of the automobile passenger compartment.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
应用推荐