通过有限元数值分析软件ANSYS对深基坑开挖与土钉支护的全过程进行了模拟。
The whole procedure of a foundation pits excavation and its soil-nailing support is simulated with the FEM software ANSYS.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
利用有限元法，通过有限元分析软件对其实际工况进行整体结构数值模拟，得出主轴装置在实际工况下的应力、变形情况。
It makes use of finite element method to carry out the numerical value simulation by software in reality in order to get the condition of strain and deformation on the main axle installing.
文章针对明孝陵四方城在车辆振动荷载下的安全性问题，应用有限元软件ANSYS进行了数值模拟分析。
In order to deal with the security of SIFANG CITY under vibratile load of busses, this paper does a simulative analysis for it with ANSYS.
使用ANSYS有限元软件、实验模态分析技术对F320型石油井架模型的动态特性进行了数值与试验分析。
We had made numerical and modal analysis on the dynamic feature of F320 model derrick with ANSYS software and modal analysis technique.
利用有限元、边界元和统计能量分析方法并结合软件对圆柱壳体在流场中受激振动及声辐射效率作了数值计算分析研究。
Numerical analysis of vibration and sound radiation efficiency from a submerged cylindrical shell has been carried out by using FEM methods, BEM methods and statistical energy methods.
采用塑性成形有限元分析软件DEFORM3D，对汽车启动器套筒冷挤压齿部成形过程进行了数值模拟。
Numerical simulation on cold extrusion process of automobile starter socket has been carried out by using the software DEFORM3D.
结合Ansys有限元分析软件建立了回转窑支承组件的有限元分析模型，并对2号窑的支承组件进行了有限元数值计算。
The finite element model of the supporting parts of No. 2 kiln has been established in ANSYS, and the numerical calculation has been carried out.
利用有限元分析软件ANSYS，对沉箱重力式码头在船舶荷载作用下的沉箱静态力学性能进行数值分析。
Using finite element procedure ANSYS, we analyze caisson gravity wharf acted by the vessel load in the static condition.
本论文应用有限元分析软件ANSYS/FLOTRAN对果蔬冷藏间的温度场和速度场进行了计算机数值模拟。
The temperature field and velocity field inside greenstuffs springhouse was numerically simulated by ANSYS/FLOTRAN software.
应用大型有限元分析软件ABAQUS，对工业管道间断焊与连续焊的温度场和残余应力场进行数值模拟。
Temperature and residual stress fields of industrial pipe discontinuous and continuous butt welding was simulated by ABAQUS.
利用ANSYS有限元分析软件，对螺旋槽管材滚压成型过程进行了数值模拟。
Rolling press process of spiral grooved tube was simulated by ANSYS software.
采用显式有限元分析软件LS -DYNA ，对于圆形钢管的弯曲加工过程进行数值模拟。
The tube bending forming processes are simulated by explicit finite element code LS-DYNA.
利用有限元软件MIDAS，对钢拱架施工的受力状态进行了数值分析。
The state of steel arch centering under construction loads is analyzed by the finite element software MIDAS.
结合某实际工程节点的模型试验，应用有限元软件对其进行数值分析。
Numerical analysis is applied with FEM software on the typical joint experiment of one building project.
再利用ANSYS有限元分析软件，建立了埋地管道有限元数值分析模型。
A finite cell model of buried pipeline is built by using ANSYS finite cell analysis program.
并运用非线性有限元软件包SHEET FORMING对某汽车骨架零件进行冲压数值模拟，分析了可能出现的问题。
And the forming process of a automobile skeleton part of sheet metal is simulated by using the non-linear FEM software SHEET-FORMING. Some problems in forming process are also analyzed here.
运用大型有限元分析软件ABAQUS，建立了适当的模型对薄板T型TIG焊接接头的温度场进行了数值模拟。
Suitable model was established to simulate the temperature distribution of TIG welding of T-joint sheets using ABAQUS code. Temperature dependant material properties were considered in the simulation.
本文运用有限元分析软件ABAQUS分别对两组不同轴压比和配箍率的型钢高强混凝土柱进行数值模拟分析。
The editor compiles this paper with the intent of analyzing two sets of HSRC columns of different axial compression ratio or stirrup ratio with the finite element analysis software (ABAQUS).
利用MARC有限元分析软件对本色系汽车涂层进行划痕实验的数值模拟。
The scratch progress was simulated by FE software MARC for natural colored coatings. The numerical value of critical load was obtained.
利用三维弹塑性有限元软件L S- DY NA对一种典型偏心轴类零件楔横轧成形进行了数值模拟，分析了其成形过程、应力应变场分布及工艺特点。
The cross wedge rolling deformation process of shaft parts with eccentric section was simulated with three-dimension finite element soft LS-DYNA by using elastic-plastic finite element method.
采用显式有限元分析软件LS - DY NA，对于圆形钢管的弯曲加工过程进行数值模拟。
The tube bending forming processes are simulated by explicit finite element code LS-DYNA. The model that tube is bent in a rotary machine is adopted.
通过与成熟的有限元数值模拟软件计算结果的比较与分析，证明该解析解稳定可靠。
The analytical results are compared with those obtained from the numerical simulation, indicating that the analytical solution is reasonable.
利用有限元软件ANSYS/LS-DYNA，对楔横轧多楔成形等直径轴进行了数值模拟与分析。
Equal diameter axis formed in Multi-wedge cross wedge rolling(MCWR)was numerically simulated and analyzed utilizing the finite element method(FEM)software ANSYS/LS-DYNA.
利用大型有限元分析软件ANSYS，对空心球与钢管焊接件的温度场和应力应变场进行了三维数值动态模拟。
The 3d finite element numerical dynamic simulation of welding between hollow ball and pipe was carried out based on ANSYS.
应用自己开发的铸件三维凝固过程有限元分析软件包对发动机铸件进行了凝固数值模拟计算，取得了较为满意的结果。
The solidification process of castings were simulated by a software for 3-d numerical simulation of solidification processes. Satisfactory results have been obtained.
应用自己开发的铸件三维凝固过程有限元分析软件包对发动机铸件进行了凝固数值模拟计算，取得了较为满意的结果。
The solidification process of castings were simulated by a software for 3-d numerical simulation of solidification processes. Satisfactory results have been obtained.
应用推荐