同时您也更容易优化IT环境和设计系统，以最大限度提高利用率，同时最小化软件成本。
It also makes it easier for you to optimize your it environment and design your systems to maximize utilization instead of minimizing software costs.
安全经济研究可以很好地运用这一方法对煤矿企业进行安全分析，从而解决安全功能最大化和成本最小化之间的优化问题。
Study of Satety Economy can benefit from this method and put Safety Analysis to coal mine, and then settle the problem of the optimization of maximizing Safety Function against minimizing Safety Cost.
提出了解决最大值的最小化问题有效的优化程序算法。
New optimization method solving minimization of maximum value problems is proposed.
一种方法是先优化得到结构功能函数的最大和最小值，再计算功能函数均值和离差的比值；
One method was getting the maximum and the minimum of the structural performance function by optimization, and then calculating the ratio of mean-value to deviation of the performance function.
通过在线路负荷矩最小与各用户负荷需求满足程度最大之间求最佳折衷平衡，解决了负荷预测不确定情况下的路径优化问题。
By making compromise between the least line load moment and the largest load demand satisfaction degree, the right-of-way selection under uncertain load forecasting is well resolved.
优化的目标函数是最大应力最小，设计变量是圆角附近设计单元控制节点的坐标。
Maximum stress ACTS as objective function. Coordinates of control nodes of design elements near the fillet are regarded as design variables.
提出一种采用粒子群优化技术，以系统载荷能力最大化及安装费用最小化为目标，确定TCSC最佳安装位置的方法。
The particle swarm optimization (PSO) technique is applied to find the optimal location of TCSC with maximum system load ability and minimum cost of installation of TCSC.
以结构的总重量最小和结构的总应变能最大为优化目标，以导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。
Total weight and seismic strain energy of the structure were selected to be optimal objectives. Average diameter and wall thickness of the structural element were taken as design variables.
根据最大误差最小法的基本原埋，对矩形花键滚刀法向齿形的双圆弧参数进行了优化，使滚刀加工出的工件齿形误差最小。
Based on basic theory of maximum error minimum method, double arc parameters for normal tooth outline in rectangle spline hob are optimized to obtain tooth outline in workpiece with minimum error.
在最优控制中，最重要的两种优化方法是庞特里亚金最小值（或称最大值）原理和贝尔曼动态规划法。
Of the problems of optimal control, the most important two optimization methods are Pontryagin minimum(or called maximum) principle and Bellman dynamic programming.
提出一种基于MATLAB的圆度评定方法，利用MATLAB优化工具箱，为采用最小区域圆法、最小二乘圆法、最小外接圆法和最大内接圆法实现圆度的评定提供了新的选择。
By using MATLAB optimization toolbox, the method has supplied a new selection to assess roundness with taking MZC, LSC, MCC and MIC as its reference circle.
同时指出，KS函数很适合求解最小-最大类型的优化问题。
Meanwhile, KS function is suitable for dealing with the optimization of Min-Max problem.
对组件软件可靠性进行优化工作时，不仅需要最大化其可靠性估计值，同时还要最小化可靠性估计方差以及测试代价。
Optimizing the software components reliability, not only need to maximize the reliability of the estimates, but also need to minimize reliability estimation variance and testing costs.
压气机叶型气动优化设计目标是静压升最大和总压损失最小。
The maximization of the static pressure rise and minimization of the total pressure loss are taken as the design targets.
为使目标函数即炼厂的利润最大或是成本最小，对控制变量为各产品的产量进行优化生产。
Control variables, production of various products, are optimized to gain the optimum value of objective function, that is maximizing profit or minimizing cost in a refinery.
本文推导出了外插齿刀的体积计算公式，并以其体积最小和刀具寿命最大作为优化的目标函数，对其设计参数的优化设计进行了探讨。
The formula of calculating the volume of pinion cutter was derived. Taking the volume and life as objective function, the optimum design of designing parameters of pinion cutter was explored.
以MATLAB为辅助工具，给出了直动推杆盘形凸轮机构在推杆实现规律的基本运动时的基本尺寸优化设计方法，使凸轮机构的体积和最大压力角达到最小。
A method for optimizing the main dimensions of a cam-oscillating follower mechanism in common follower motions is presented with the MATLAB, which maximizes the CAM volume and maximum pressure angles.
针对雷达中动目标检测技术中滤波器组设计，从普遍采用基于最小最大化的优化原则出发提出了一种改进优化原则。
A new improved optimization method is promoted based on common minimum-maximum principle for implementation of the filter bank of MTD radar.
现代负载被最优化，通过使电功率消耗最小获得最大的电效率。
Modern loads are optimized for maximum electrical efficiency by minimizing consumption of electrical power.
建立了求解铁路局范围内请求车审批优化的数学模型和与此模型对应的网络图，将铁路请求车审批优化问题转换为求解最小费用最大流问题。
This paper discusses the smallest cost problem on the undirection network, which has the upper limit of rate of flow, and sets up its mathematics model, and gives its relevant algorithm.
建立了求解铁路局范围内请求车审批优化的数学模型和与此模型对应的网络图，将铁路请求车审批优化问题转换为求解最小费用最大流问题。
We study uncapacitated version of the minimum cost flow problem of one-commodity and two-commodity with not only fixed cost but also variable cost, and give them each a polynomial algorithm.
利用连续的粒子群优化代价敏感主动学习的控制参数，该参数用于最大化未标注样本的信息度和最小化标注代价。
This optimization mechanism employs the continuous-valued PSO to optimize the control parameter to maximize the value of information of instance and minimize the cost of oracle.
于是MTMD的优化准则可定义为设置MTMD结构最大动力放大系数的最小值的最小化。
The optimum criterion of MTMD can then be selected as minimization of the minimum values of the maximum dynamic magnification factor(DMF).
为了提高航空网络的旅客运送服务质量，我们还对现有的网络结构进行了优化，通过最小化网络直径和最大化航线的旅客流来提高航空网络的适应性。
In addition, in order to improve the network fitness, we optimize the current network topology by minimizing the network diameter and maximizing the passenger flow on each edge.
大连理工大学博士学位论文第四章从最小叉嫡原理与最大嫡原理互补性出发建立了均值一叉嫡优化模型。
In chapter 4, the mean-cross entropy model is proposed on the analysis of the minimum cross entropy principle.
大连理工大学博士学位论文第四章从最小叉嫡原理与最大嫡原理互补性出发建立了均值一叉嫡优化模型。
In chapter 4, the mean-cross entropy model is proposed on the analysis of the minimum cross entropy principle.
应用推荐