通过对该项目工程设计方案及工艺流程和节能、环保方案的论述，证明了该项目在技术上的可行性。
Proved the project technical feasibility through analyzing the project engineering architecture proposal, process set up, possibility of energy-saving and the environmental protection.
在以前的实验方案和流程基础上进行了改进，使整个工艺系统更趋简化及合理。
On the base of former experiments, some improvements were made for total technology system more simple and reasonable.
通过该冲件特点的工艺分析，确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。
Analyzing the craft features of a punching piece, ascertain the process and scheme of a progressive die blank layout, and the design of main die working parts and final assembly structures.
保温材料在施工使用时的含水率应符合设计要求、工艺要求及施工技术方案要求。
The moisture content of insulation materials in construction should meet the design requirements, technical requirements and construction technical requirements.
根据装药工艺及推力方案设计要求，提出了双辐条轮了孔装药设计方法。
The design method of new wagon wheel grain has been furnished according to requirement of propellent loading process and thrust project.
重点介绍辽河减粘裂化装置的工艺原理、流程和改造方案及技术路线。
Especially introduce process philosophy, flow sheet, rehabilitation scheme and technical route of Liaohe vis-breaking cracking unit.
此项研究为油气储层酸化工艺的研究及制定合理的酸化施工方案提供了重要的资料。
This achievement in research provides important information for the research of the acidizing process of hydrocarbon reservoirs and working out rational acidizing working plan.
针对双鼠绕组电机转子的结构问题提出了改进的方案及具体实施工艺。
Improving plans and concrete process are put forward in view of the structure problems of double squirrel cage winding motor.
叙述了装置工艺流程、主要控制方案及主要设备的设计特点。
Process flow scheme of the unit, main control programs and the design features of equipment are described.
文章对砂砾填筑路基的设计方案及施工工艺进行了研究、探讨。
This paper researches and discusses the design project and construction process of filling sub-grade with shingle.
根据磊口大桥现有的病害状况，分析其病害原因，介绍其维修加固方案及主要工艺和材料。
In terms of state of now available diseases on Leikou bridge, the paper analyses reasons for diseases, introduces schemes for maintenance and reinforcement, major technology and materials.
该文介绍了该工艺的方案、主要构筑物、设备及参数等。
The paper introduces the wastewater processing schemes, main structures, equipments and parameters.
介绍了齐鲁第二化肥厂甲醇装置脱碳弛放气回收后用做尿素原料所采用的工艺方案、运行状况及效益情况。
The process scheme, run state and economic effect for recovering carbon dioxide from the decarbonized purge gas of methanol plant of the Second Feritilizer of Qilu Petrochemcal co.
介绍了粘贴碳纤维布、增设体外预应力束、裂缝处理的加固设计方案及主要施工工艺。
The strengthening design plan and main construction process of affixing carbon fabric, adding external prestressed tendons and cracks treatment were introduced in this paper.
详细介绍了燕山水库电站反导井爆破开挖所采用的施工方案选择，钻爆设计及施工工艺等。
The implementation scheme, blasting design and technology which were applied to excavate the inverse-induced shaft of Yanshan Reservior Power Station are introduced in detail.
介绍了该工程爆破的方案选择及分析，爆破参数及工艺措施。
The program option, parameters, technological measures and analysis of the engineering blasting are introduced.
研究了钛及钛合金的气体标准试样制备工艺和数据处理方案。
The preparation procedure and data processing program of gas standard samples for titanium and titanium alloys.
通过试验研究，最终完成了该钢种的成分方案、工艺方案及热处理方案的设计，对指导工业生产实践起到了积极的作用。
The plans of chemical composition, process and hot treatment which was finished by the experiment and research will play an active role in conducting the industry production.
简述了土钉墙支护技术的方案选择、施工工艺、技术要求及质量控制，并就具体实例做了详细分析。
This paper is to discuss the project selection, construction method, technical specification and quality control of soil nailing and analyze the special factor in detail.
对钻井工艺特点，控制方案，系统组成及注意事项做了简要论述，并对运行中的现象做简要分析。
It is discussed that the technological characteristics, control scheme, structure of system and points for attention, also analyzes some phenomenon in running.
详细讲解复合风管的优越性能、制作工艺及风管的安装，并以工程实例分析替代方案的经济可行性。
Also particularly explains the superior characteristics, fabrication process and installation of the compound air duct, in addition, analyzes the economic feasibility of the substitute project.
文章重点介绍了寒冷地区侯家沟大桥承台大体积砼施工技术方案及实施工艺。
This paper focuses on the construction technology program of mass concrete of Houjiagou Bridge cap in cold regions and the implementation.
分析了传感器安装支架的成形工艺，针对其成形工艺中的重点及难点制定了合理的工艺方案。
The forming technology of sensor support setting was analysed and reasonable process project was planed aiming at difficulties of forming technology.
文章涉及中国先进研究堆重水浓缩系统的功能、工艺方案和流程设计及系统设计的特点。
The function, the scheme and the flow design of heavy water concentration system and its characteristic for China Advanced Research Reactor are introduced in the paper.
重点介绍了松花江特大桥承台大体积混凝土施工技术方案及实施工艺。
The text introduces construction technology scheme and construction technic of mass concrete main pillar base slab at the Songhua River Bridge.
过程检验按施工方案、工艺文件及图纸、标准规定的技术要求进行检验。
In-process inspection should be carried out according to the construction scheme, technology documents, drawings, technical requirements of standards.
过程检验按施工方案、工艺文件及图纸、标准规定的技术要求进行检验。
In-process inspection should be carried out according to the construction scheme, technology documents, drawings, technical requirements of standards.
应用推荐