文中对类似零件的数控加工编程具有借鉴意义。
This paper can primely guide NC programming for machining the similar parts.
本程序实现一个实例化的长轴类的零件数控加工编程。
An example of this program category of the long axis CNC machining of parts programming.
数控加工刀具轨迹生成是数控加工编程的基础和关键。
The tool path of NC simulation is the base and the key in NC simulation.
并以齿轮渐开线轮廓的数控加工编程为例说明了它的应用。
This article illustrates its application by the NC programming of gear involutes profile.
文中简述了自由曲面数控加工编程中干涉检查的各种方法。
Methods of interference checking in NC programming are briefly discussed.
对数控加工编程中容易出现的一些问题进行具体分析，并提出了相应的对策。
In the article, the incidental problems in nc machining programming are analyzed concretely and their solving methods are provided.
利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
指出应用好UG提供的强大的数控加工编程功能是提高企业数控加工应用能力的一个重要途径。
The result shows that it is a very important way to improve the ability of NC processing in industry using NC program module of UG.
文章提出一种螺旋桨叶型数控加工编程新方法，通过实际加工证明其实用可靠，而且大大提高了表面加工质量和加工效率。
A new method of nc programming for impeller blade is introduced. It was proved that the method was very useful and credible by machining. The method improved the roughness and machining efficiency.
本文基于刀具路径几何仿真，研究了平面曲线轮廓数控加工进给速度优化技术，这种优化技术是智能化数控加工编程的基础。
The paper presents a systematic technology of feed rate optimization on CNC planar profile milling based on geometric simulation of tool path which is the base of intelligent CNC programming.
把隐函数的优势应用到数控加工编程中，即对于截面法的数控加工，求出刀具切削平面与隐函数曲面的加工轨迹，再用正负法绘制刀具轨迹曲线。
For NC machining of plane section method, the machining path of tool cutting plane and implicit surface can be found, and the curve of the tool path is drawn by the positive-negative method.
开发了一个集上述功能为一体的集成化钣金数控冲切加工自动编程系统，并进行了实例研究。
Develop an automatic programing system of nc blanking process which integrates above functions as one integral and take study to practical examples.
此算法应用于复杂螺杆数控加工的自动编程系统开发中，取得了较好的效果。
Better effect is got when this algorithm is used in exploiting automatic program system for NC machining complicate screw.
该方法能准确地进行刀具轨迹补偿，运行可靠，已成功运用于数控铣削加工的自动编程系统。
The method can accurately compensates cutter path and it has been successfully applied to automatic programming system for NC-mill.
最后介绍了不等深螺杆数控加工的编程技巧及部分程序，以及加工时的注意事项。
Finally introduced the varied deep screw numerical control processing program skill and partial programming and cautions during machining.
本文的研究对象是数控加工技术，包括数控编程技术和数控机床技术。
The research object of this thesis is NC machining technologies including NCP and CNC.
介绍了一种直螺杆加工数控编程的改进方法。
In this paper, the improvement of frank screw machining of numerical control program is introduced.
如何设置刀具长度补偿参数一直是数控铣床和加工中心编程和操作中的难点。
How to set the tool length compensation parameters is the difficulty in operating NC milling machine or machining center.
刀具轨迹生成方法是模具高速加工数控编程的基础和关键。
Tool track creation method is the base and key of mold high-speed milling NC program.
根据滚压模型腔的形状特点，介绍了三种不同的建模方法以及数控加工自动编程过程。
Three modeling methods and NC auto programming based on shape characteristics of cavity of rolling forging die are discussed.
将成组技术运用于数控加工中，充分利用数控机床的柔性加工和工序集约化的特点，提高了数控编程的效率与质量。
Efficiency and quality of nc programming are improved with applying group technology to nc process, and making full use of such features of nc machine, as flexible process and integrated procedure.
在分析了目前的数控加工自动编程系统后，提出了一种以仿真实现五轴联动机床轨迹控制的新方法。
Based on the analysis of current NC automatic programming systems, a new method for the path control of five-axis linkage machine tools was proposed by means of simulation.
用G代码编制该零件的数控加工程序，并附以编程尺寸的计算方法，其中零件工艺规程的分析是此次论文的重点和难点。
G code index this part of NC program, and report to the programming of the calculation method, where the part process analysis is the focus of this and difficulty.
本文讨论在数控机床加工过程中与加工编程直接相关的几个主要工艺问题对加工的影响及相关处理方法。
In this paper, the effect of technics on numerical controlled machining process and program process are discussed., and the methods to resolve the problems are given.
自动编程系统实现数控加工程序的自动生成。
The former realizes automatic formation of NC program and the last simulates NC tool hardware interpolation process.
本文介绍了数控编程和数控加工中保证零件的尺寸和公差要求的方法。
This paper introduces methods for ensuring part dimensions and tolerances in CNC programming and machining.
通过改进圆柱凸轮数控铣削加工编程方法，降低了圆柱凸轮的加工成本并能满足凸轮槽宽的高精度要求；
The machining cost of barrel cam is decreased by improving the CNC programming method for milling of barrel cam, and the method can meet the request of cam groove width precision.
根据轮毂上曲面的特殊性，提出了采用神经网络方法进行编程，实现数控加工，以取代传统的加工方法的设想。
According to the peculiarity of surface on wheel hub, the method of programming by neural network is presented to realize NC machining instead of traditional machining method.
根据轮毂上曲面的特殊性，提出了采用神经网络方法进行编程，实现数控加工，以取代传统的加工方法的设想。
According to the peculiarity of surface on wheel hub, the method of programming by neural network is presented to realize NC machining instead of traditional machining method.
应用推荐