考虑到现场的环境干扰较强，对总线电缆及CAN控制器、驱动器采用了冗余设计，保证数据传输的可靠性。
Considering strong disturbance environment in the field area, redundant design in bus cable, CAN controller and driver is involved to assure the reliability of data transmission.
为了排除人为干扰、提高可靠性，采集数据以可编程逻辑控制器为核心，通过现场总线和以太网的多层网络传送至数据库中。
To avoid interfering by work, data were sampled through a multi-layers network which synthesize the field-bus and Ethernet and center on programmable logic controller.
为了在总线上传输仪器命令和数据，控制器给一个呼叫口和一个或几个响应口分配地址。
To transfer instrument commands and data on the bus, the Controller addresses one Talker and one or more Listeners.
VME总线控制器是VME总线系统的关键设备，具有完整的VME总线数据传输能力。
VMEbus Controller, which has the complete data transfer capability, is the key device of the VMEbus system.
软件设计主要包括以下功能模块：接收总线数据、控制EMPC、监控电力汇流条、传送汇流条控制器状态等。
The software includes the following function modules: bus data receive, EMPC control, electrical bus monitor, status data transmission and so on.
同时主要对CAN总线节点的通信程序、家电通用控制器和数据采集模块进行了详细设计，并最终在开发环境下演示运行。
And it designs the CAN field bus node communication, the universal controller and the module of data gathering in details, and finally runs the system under the development environment.
而显示控制器作为控制的一个重要部分，可以对总线的数据实行监测和修改。
As an important component of the control system, display controller can monitor and modify the BUS data in real time.
设计出了一种基于可编程自动控制器(PAC)，采用现场总线和I7000系列分布式数据采集模块组成的潮汐模拟控制系统。
In this sense, the control system based on programmable automation controller (PAC) for simulating tide with field bus and I7000 distributed data acquisition units was developed.
发送器，致动器和可编程序控制器间信息交换用文件传送协议总线。数据链层。
Fip bus for exchange of information between transmitters, actuators and programmable controllers. Data link layer.
其设计包括不同数据节点的CAN控制器，及单片机控制的CAN接口模块和基于DSPTMS320 LF 2407a的CAN总线接口等。
The design includes designs of different can controllers for different data nodes, the can module controlled by single chip computer and can bus interface based on DSP TMS320LF2407A, etc.
控制器的逻辑单元为多cpu网络体系，体系内各智能化功能模块通过CAN总线互联，实现模块间的数据交换和多cpu协同工作。
The logic elements in controller are multiple CPU network setup. Individual intelligent functional modules are interconnected by CAN bus for data exchanging and multiple CPU cooperating.
论文的重点是在FPGA芯片上实现各个总线控制器以及相互之间的数据转换。
The paper focuses on realizing each field bus controller and the mutual data conversion on FPGA chips.
智能采集器与控制器通过现场总线通信，交换信息、发送指令、采集数据和控制。
Intelligent data acquisition collector communicates with controller via field-bus, exchanges information, sends command, gather data and control.
现场总线是，提供一个有效的数字串行数据交换中的一个或多个控制器和现场设备的数量数字网络。
Field buses are digital networks that provide an efficient digital serial data exchange among one or more controllers and a number of field devices.
一种主机控制器在处理器的控制下经由总线通信系统在单独事务中传送数据。
A host controller transfers data over a bus communication system, under the control of a processor, in individual transactions.
本设计实现了在MIC总线冗余系统中主控制器与从控制器间的数据通讯。
This design realizes the data communication between the main controller and accessary controller in MIC bus redundancy system.
数据节点通过各自CAN控制器与总线相联，实现网络数据交换。
Data nodes are connected to the bus through their own CAN controllers to realize network data-changing.
单片机通过CAN总线向主控制器发送检测数据，主控制器经过判断可主动启动并完成车体的制动动作。
The microcontrollers transmit data to the main controller by the CAN bus, the main controller can start-up and finish the brake action initiatively after estimating.
文章采用AT 89 C 52单片机与CAN控制器sJA 1000设计了基于CAN总线的电动汽车数据采集显示与控制系统。
This paper presents a data acquisition and display system of HEV based on CAN BUS using microcontroller AT89C52 and stand-alone CAN controller SJA1000.
对微控制器而言，PDIUSBD12看起来就像一个带8位数据总线和一个地址位（占用两个位置）的存储器件。
To a micro-controller, the PDIUSBD12 appears as a memory device 8-bit data bus and 1 address bit (occupying 2 locations).
总线控制器作为管理计算机与现场总线的接口装置，起到了管理计算机与智能仪表数据双向传输的网桥作用。
As a network bridge, communication controller is the interface device which realize the function of communication between supervise PC and field bus.
实现了1553B终端RT与总线控制器BC之间高可靠的数据通信。
The data communication between 1553b RT and BC is realized effectively and credibly.
以C8051F 023处理器和CAN总线控制器SJA1000为核心，设计了一种通用的基于CAN总线的数据采集通信系统。
A kind of current data acquisition system based on CAN is designed, its core design is C8051F023 microprocessor and CAN controller SJA1000.
论文介绍了多功能总线控制器编码器的设计，编码器有六个模块组成，分别为位控制单元、FIFO单元、帧分界符单元、数据转换单元、CRC校验单元和曼彻斯特编码单元。
The paper describes the design of encoder which is divided into seven modules: bit control unit, FIFO unit, frame delimiter unit, data conversion unit, CRC unit, Manchester encoding unit.
借助于差分传输的RS 4 85总线，以微控制器为核心的数据采集系统可方便地构成多机系统，可同时并行进行数据采集。
The data gather system made by micro controller may make up of a multi computer system expediently with the RS 485 bus, which can gather data synchronously in parallel.
在数据通信方面，提出了由总线控制器与报文收发器构成的CAN总线接口电路，并详细论述了与总线接口初始化、总线中断处理、总线数据收发相关的设计实现过程。
For the purpose of data communication, the paper lodges the CAN interface circuit, and expatiates the programs of bus initialization, bus interrupt service routing, receiving and sending bus data.
介绍了总线控制器pci9054的桥式作用、用可编程逻辑器件模拟LOCAL总线侧cpu的设计、EEPROM的配置以及总线的数据传输操作过程，然后在此基础上给出了数据采集系统的设计。
It includes that the bus controller PCI9054 action, the simulation of the CPU design with CPLD on the LOCAL bus side, configuration of EEPROM and the bus operation of the data transmission.
利用多通道缓存串行口mcbsp实现SPI总线方式的数据采集，并采用两个DMA控制器实现了数据的实时传输和存储。
The use of multi-channel buffered serial port MCBSP is to achieve SPI bus (mode of) data collection, and the real-time data transmission and storage is achieved by the use of two DMA controllers.
在实验室开发了基于直流电力总线的风力发电实验系统，最后给出了控制器的仿真和实验的数据结果，验证了控制器的有效性。
An experimental mode of wind generation unit based on DC system was developed in the laboratory. The simulation and experimental results were given to confirm the val...
在实验室开发了基于直流电力总线的风力发电实验系统，最后给出了控制器的仿真和实验的数据结果，验证了控制器的有效性。
An experimental mode of wind generation unit based on DC system was developed in the laboratory. The simulation and experimental results were given to confirm the val...
应用推荐