与传统数字控制器设计不同，本文应用FPGA设计数字控制器。
Differing with traditional method on digital controller design, this paper presents a new approach to implement digital controller based on FPGA.
作为一种数学解析模型，交流小信号模型对于弧焊逆变电源的数字控制器设计具有无法替代的理论指导意义。
As a kind of mathematical analytic model, AC small-signal model is very important to guide the digital control system design.
又因为是试验台控制系统，其本质是为了进行伺服缸的试验，所以我们针对该系统应用了多种控制策略，其中计算机控制系统的数字控制器设计是本文研究的重点内容。
Because of the essence of this control system is to complete servo cylinder test, we adopted many control strategies, and the design of digital controller of computer is the main research object.
将此模型用于数字控制器的设计，取得了预期的效果。
This model has been applied to the design of a digital controller, yielding an expected result.
对绞车的工作特性进行分析，采用大林算法，设计了一种恒速度数字控制器，给出了控制模型和数学公式。
Analyzing the characteristic of the hoist, a kind of digital controller of constant speed is designed using Dahlin arithmetic, the model and formulas are presented.
提出了一种飞机防滑刹车数字控制器的设计方法。
This paper presents the design of a digital anti-skid break controller.
本文首先基于悬浮系统的确定性模型，运用双环控制思想设计其数字控制器。
This paper first utilizes the ideological design digital controler of double-loop control based on the magnetic definite model of system.
本文针对研究减摇水舱性能的船舶试验台位置系统，设计了基于DSP芯片的数字控制器。
A digital controller based on DSP is designed for position system of the test bed of ship, which is used for testing the anti-rolling tank.
对并联型电力有源滤波器建立了数学模型，详细地分析了在全数字控制下，谐波指令的生成和电流控制器的设计。
Having established the mathematic model of a parallel active power filter, this paper has analyzed the generation of harmonic current order and the design of its current controller in detail.
本文的研究目标是设计具有产品化、商业化价值的混合有源滤波器的数字控制器。
This thesis's main object is to design a digital controller of HAPF which can be commercialized and made into product.
本课题以某型舵机控制器为研究对象，设计了一种数字控制液压伺服回路校准的软件实现方法，提高了系统的可靠性和可维护性。
Aimed at a kind of wing control system, a software method that digital control hydraulic servo circuits were calibrated was proposed to improve system's reliability and maintainability.
采用DSP技术，设计了一种新的数字控制系统，着重从控制器硬件、软件结构方面进行了论述，并予以系统实施。
Design a new digital control system with DSP technology, focus on the dissertation of controller hardware and software structures and implemented on the system.
首先结合变推力发动机的特点设计了数字控制器的硬件电路。
Firstly, according to the traits of the variable thrust engine, the hardware of the control system is designed.
论述了以数字控制器DMC300A为核心的数字式交流伺服系统的硬件和软件设计，对设计过程中所涉及到的重要参数给出了设定方法。
The software and hardware of a digital AC servo system using a digital controller DMC300A as the control center is designed. This method to obtain some important parameters is proposed.
介绍了开关磁阻发电机系统的基本结构和工作原理，设计了以TMS320 LF 2407a和CPLD为控制核心的数字控制器的硬件和软件。
This paper summarizes the basic structure and fundamental theory of Switched Reluctance generator system. The digital controller was designed based on DSP of TMS320LF2407A and CPLD.
针对热压焊机的温度控制问题，进行了数字控制器的设计与验证。
The design and field experiment of a digital temperature controller for a hot pressure welding machine was discussed.
在分析逆变器模型的基础上设计了各控制器参数，并通过芯片TMS320 LF 2407 A实现了数字控制算法。
Base on the inverter model, the parameter of these different control loop controller is designed and the digital control achieved through DSP TMS320LF2407A.
基于DSP的液压伺服系统，以TMS320 LF 2407 A芯片为主处理器，设计了一种数字控制器。
A digital controller for hydraulic servo system based on DSP was designed, where the TMS320LF2407A chip was adopted for the main processor.
在分析光伏控制器的要求和特点基础上，介绍了一种数字控制型的PWM光伏控制器，包括硬件和软件设计。
Based on the analyze of solar controller's requirement and character, this paper introduce one kind of digital controlled PWM solar controller, including the design of hardware and software.
本文通过对主动磁悬浮轴承系统的建模，设计了带降维观测器的最优反馈数字控制器，并在模拟中验证了控制器的正确性。
From a modeling of an active magnetic bearing (amb), a numeric controller was designed with degrade observer and optimized feedback control. it was proved out with simulink in matlab.
本文以80c196 K B单片机为控制器，设计了SR电机直接数字控制系统，进行了软硬件的设计和调试。
A direct digital control system of SRD was designed using 80c196kb single chip as micro controller, and hardware and software debugging was made in this process.
PLC控制程序的设计：包括数字控制器与PLC控制器之间、PLC与机床之间的各种信号处理等。
PLC program design, signal processing between NC controller and PLC controller, as well as PLC and machine.
本文所设计的全数字控制器的硬件开发平台功能完善，性能好，通用性强，可以用于飞机电源系统以及电力系统的发电机控制器的研制和开发。
The general development platform has a good performance. It can be used to design new Generator Control Unit for aircraft power supply system or power system.
选择合适的数字控制器和采样周期是设计数字控制系统的关键。
It is the key to designing a digital control system to select suitable digital controller and sampling period.
本文给出用于实时计算机力控制系统的、具有条件输出反馈的数字控制器的设计方法。文中讨论了条件反馈控制器的基本原理、结构以及设计方法。
In this paper, a method of designing the digital controller for real-time computer control hydraulic force system with conditional output feedback is presented.
本文给出用于实时计算机力控制系统的、具有条件输出反馈的数字控制器的设计方法。文中讨论了条件反馈控制器的基本原理、结构以及设计方法。
In this paper, a method of designing the digital controller for real-time computer control hydraulic force system with conditional output feedback is presented.
应用推荐