提出了一种新型的先进气压式定量浇铸系统，并对此系统的结构原理与控制系统框图进行了分析。
A new and advanced pneumatic quantity casting system is presented and its structure principle and diagram of controlling system are analyzed.
论述了将计算机仿真技术应用于翻车机控制系统开发的可行性，并给出具体仿真方案及编程框图。
The feasibility of applying this technique in the development of the control system of tippers is demonstrated with the concrete emulation scheme and a programming flowchart.
本文给出了带知识库的微型计算机控制策略，介绍了两级微机控制系统的软件和工作框图。
The paper presents the control strategy of the microcomputer with knowledge base, and describes the software and block diagram of work of the two-stage microcomputer control system.
本文介绍850初轧机压下控制系统的原理框图、动态分析和工作效果。
This paper introduces control system principle block diagram, dynamic analysis and working effect of 850 reducing rolling mill.
在分析原脉冲反吹控制系统的基础上提出了一改进方法，给出了具体程序框图和程序。
On the basis of analysis of the former pulse inverse blow control system, improving methods are proposed and actual program block diagrams and programs are given.
介绍了一种微机双绕组变压器负荷经济运行控制系统的基本工作原理、硬件结构框图和主要技术特点。
The basic working principle, hardware structure and main technical features of a micro computer based control system for transformer economic operation is presented in this paper.
图形分析器通过对控制系统方框图的几何结构进行跟踪探索和结构分析，生成相应的拓扑结构。
After tracing and analyzing the geometric structure of control system block diagram, thereby the corresponding topological structure is generated by graph analyzer.
文中列举了各种数学模型、控制系统程序流程图和方框图。
Mathematical models, systematic program flow charts and block diagrams of control systems are listed.
本文叙述了主从式温度测量控制系统的基本组成、工作原理、程序控制框图和系统的特点。
In this paper, the basic constitute, working principle, program chart and character of the main-subsidiary system measuring and controlling temperature were given.
介绍了PR- 1管道机器人的系统结构以及可切换手动、机动双控制系统，并给出了控制系统的硬件原理图和软件框图。
The system structure and its dual- control system of PR- 1 In- Piping robot is presented in this paper. The hardware and software block diagram of control system is also given.
介绍了以MCS-51单片机作为处理器的机械式立体车库的特点、工作原理，并给出三车位的控制系统硬件电路图和软件流程框图。
This paper introduces the characteristic of mechanical stereo garage controlled by the MCS-51 serial single-chip, and summarizes the work principle of this system.
论述了针织和缠绕增强层可互换生产的胶管生产线控制系统的功能及其实现方法，并介绍了全线控制过程、控制运算和可编程序控制器编程框图。
The control systems for production line of rubber hose with switchable knitting or winding carcass are described, and the control process, control calculation and PLC block are introduced.
介绍了8031单片机控制系统的硬件组成、软件结构和程序方框图。
It also recommends the hardware and software composition and program block diagram of 8031 single chip microcomputer control system.
利用西门子公司的PLC模块作为控制核心，对西门子S7-200在远程闸门控制系统中的应用进行了设计。给出了闸门控制系统硬件构成和系统软件编程框图。
Using the PLC module made by Simons as a control core, S7-200 made by Simons is designed in remote gate control system, the draft of its composing and its system software program are put forward.
分析了国内外分散型控制系统可靠性水平的现状，介绍了本系统所采取的可靠性设计措施，系统的可靠性逻辑框图和数学模型。
This paper analyzes the reliability levels of the DCS system both at home and abroad, introduces the system reliability design methods, logical diagrams and its mathematic models.
对流量控制系统与温度控制系统及粘度控制系统进行了比较，给出了流量控制系统的流程框图。
Comparisons are made among the flow control system and temperature control system as well as viscosity control system, and the flow block chart of flow control system is given.
本文主要介绍太钢新横切机组PLC控制系统的硬件配置、控制功能及软件程序框图。
This paper mainly introduces the PLC (Programmable Logic Controller) control system of new-style cross cutting unit. The function of this system.
给出了热泵式恒温恒压供热水系统的工作原理框图，对温度控制系统和压力测控系统设计作了详细叙述，并给出了设计原理框图。
The diagram of working principle of the hot water system based on heating pump and constant temperature and pressure is introduced.
介绍了由单片机及一线总线温度传感器组成的保鲜库智能温度控制系统的结构与原理，给出了MCS5 1程序的部分框图。
This paper present a construction of the intelligent temperature control system in a refrigerating storeroom. Some program designing idea based on MCS51 is drawn.
描述了温度控制系统的整个设计过程，给出了系统的组成框图、硬件电路、主要芯片的功能和工作原理。列出了系统的所有软件流程图。
In this article, the whole design process of temperature control system is described. The system constitutes frame diagram, hardware circuit, main chip function and working principle are given.
重点介绍了控制系统的硬件组成和软件设计，给出了系统结构原理框图。
The hardware composition and the software design of the controlling system are mainly introduced, and the construction chart of the system is shown.
本文着重介绍了DSP的AD转换模块和PW M生成模块在弧焊逆变电源控制系统中的应用，并给出了相应的硬件电路和软件程序框图。
In this paper, the applications of its AD convert module and PWM module in the arc welding convert system are introduced, and the corresponding hardware circuit and software flow chart are designed.
本文介绍850初轧机压下控制系统的原理框图、动态分析和工作效果。
This paper introduces control system principle block diagram, dynamic analysis and working effect of 850 reducing rolling mill. Output response of the control system is quick and stable.
给出了大功率电源控制系统的控制要求、功能和工作原理以及系统PLC硬件构成图和软件流程框图，总结了系统研制中一些实际问题的解决办法。
To achieve the safe and reliable operation of high power supply in HL-2A Tokamak, an logic control and protection system based on Siemens PLC is applied.
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of control system, and main...
介绍了广州地铁一号线采用列车自动控制系统的设备概况、框图、功能及特点。
The paper introduced the equipment outline, frame drawing, function and characteristics of ATC system of Guangzhou subway No 1 line.
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of …
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of …
应用推荐