对于本文来说，我们将着重介绍控制系统，以及在将其嵌入物理机器人之前可以对其进行仿真和验证的方法。
For this article, I focus on the control system and the ways in which you can simulate and validate it before spending time embedding it in a physical robot.
本论文介绍了“基于单片机的温度控制系统”的设计及其相关内容。
The design of The temperature control system based on MCU of is introduced in this paper.
这里介绍一种新型柴油机回转式分配泵的控制系统。
A control system for a new diesel rotary distributor pump is here introduced.
本文介绍一种新型双泵复苏装置的控制系统。
This paper introduces the control system of a novel double-pump resuscitation(DPR) instrument.
其中硬件控制系统主要介绍了包括主芯片的外围电路，信号采集模块以及电机驱动模块。
Among them the control system of hardware has introduced the peripheral circuit including main chip mainly, the module the signal gathers and the motor driving module.
介绍了构成GTAW焊接质量智能控制系统的硬件设备和组成原理。
The hardware of the intelligent control system for GTAW welding quality is also introduced in this paper.
本文介绍在风机性能试验中使用自动数据采集和控制系统的情况及用来完成试验的通用程序。
This paper describes the application of an automatic data acquisition and control system in fan performance tests and the universal program used.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
文摘：介绍了集散控制系统在矿区焦化厂生产过程中的应用。
Abstract: this paper introduces the application of centralized and decentralized control system in the production process of diggings coking plant.
第三部分介绍了舞台吊杆控制系统的实现，这是系统的核心部分。
Part III introduced stage bar control system's achieved; this is the core of the system.
本文介绍丰田汽车自适应雷达巡航控制系统的结构、适用情况以及相对于普通巡航控制系统的优势。
This paper introduces the structure and usable condition of the self-adapting radar cruise control technology on TOYOTA and the advantages relative to the common cruise system.
本文主要介绍这种非线性自适应控制系统及其外回路航迹跟踪控制器的设计问题。
This paper presents the design method of this type of nonlinear adaptive control system and its out loop trajectory tracking controller.
介绍了控制系统的功能、运行节能原理、系统组成和变频器工作原理。
The functions, the principle of operation energy saving, system composition and operational principle of the converter are presented.
该文主要根据温室控制的特点，介绍了一套基于485总线分布式智能温室环境控制系统。
According to the characteristics of the greenhouse control systems, this paper introduces the distributed intelligent greenhouse environmental control system based one the 485 field bus.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
详细介绍了控制系统的功能，并给出了DCS控制系统结构图，同时探讨了控制系统发展趋势。
Functions of control systems are described in detail, a system structure diagram of DCS is given and developing trends of control systems are discussed.
本文给出了带知识库的微型计算机控制策略，介绍了两级微机控制系统的软件和工作框图。
The paper presents the control strategy of the microcomputer with knowledge base, and describes the software and block diagram of work of the two-stage microcomputer control system.
介绍了生产工艺流程、控制系统的软、硬件构成，所实现的功能等。
The paper gives out producing technics flow, thecontrol system structure of software and hardware and the system functions.
介绍触摸屏和PLC在脉动真空灭菌器控制系统中的应用研究。重点介绍了控制系统的硬件配置以及软件设计。
This paper introduces the application study of touching screen and PLC in control system of the pulsant vacuum sterilizer. It mainly discusses the hardware configuration and software design.
介绍了印刷线路板生产废水治理中的计算机控制系统，重点介绍了P LC在该系统中的作用。
This paper introduces the computer control system in waste water treatment in printing circuit board production and emphasizes the function of PLC in it.
文章介绍了一种由工业计算机控制的变频调速闭环控制系统，同时介绍了该系统的控制功能和电气实现。
The closed circuit control system with frequency conversion for adjusting speed controlled by industrial computer is introduced with its control function and realization.
本文介绍一种流量计标定控制系统，文中详细介绍了其工作原理及控制系统的软硬件结构。
This paper presents a flowmeter calibration control system and goes into details on the working principle and configuration of its software and hardware.
设计了一套测试制动片粘结强度的电液伺服控制系统，介绍了系统的原理、组成和硬件、软件设计。
This paper gives a design of electro hydraulic servo control system for testing shear intensity of brakes, explaining its working principle and constitution of hardware and software.
本文提出了一种金刚石压机的新型控制模式—基于DSP (TMS320 LF 2407)的嵌入式控制系统，并介绍了该控制系统的软硬件设计。
A new control mode of diamond pressure machine was introduced, which is embedded control system based on DSP (TMS320LF2407), also, hardware design and software design were introduced in this paper.
建立了非旋转管道环缝焊接自动控制系统，并介绍了其系统结构和工作原理。
The automatic control system of circular seam welding process for non - rotated pipeline was developed in the paper.
建立了非旋转管道环缝焊接自动控制系统，并介绍了其系统结构和工作原理。
The automatic control system of circular seam welding process for non - rotated pipeline was developed in the paper.
应用推荐