详细介绍了电气工程自动化专业自动控制理论实验所涉及的主要内容。
The main contents involved in automatic control theory experiment of electric engineering and automation major are introduced in details.
平衡梁控制系统作为新的现代控制理论实验装置，适用于多种控制方法的研究。
As a new type experimental device for modern control theory, the beam balanced control system can be used to study various control methods.
平衡梁是一种新型的控制理论实验装置，原理类同于倒立摆，但其结构更接近于工程实际。
The balancing beam system is a new experimental device of control theory, whose theory is similar to the inverted pendulum system but structure more approaching to the practice of engineering.
运行以下工具进行统计分析：如描述性统计、测量系统的分析、假设检验、设计实验，控制理论图、验收抽样等。
Performs statistical analysis using tools such as: descriptive statistics, measurement system analysis, hypothesis testing, designed experimentation, control chart theory, acceptance sampling, etc.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
理论计算和计算机模拟实验结果显示，模糊控制迭代算法的迭代结果其振幅均方误差为0.69%，振幅不均匀度为1.01%。
Computer simulation experiment, as well as theoretical research show that the amplitude mean square error of the iterative output derived from IAFC is 0.69%, and the amplitude un-uniformity is 1.01%.
该实验丰富了机械类控制工程基础实验内容，巩固了学生的基础理论知识。
So experiment content was enriched for the course of control engineering foundation, and the knowledge of basic theory of students was solidified.
实验结果与理论模型的一致进一步表明控制输入电功率的意义。
The agreement between theoretical analyses and experimental results shows the importance of controlling the input electrical power .
实验教学是理论教学的延伸和补充，搞好实验教学是整个自动控制理论教学过程中的重要环节。
Experimental teaching is a supplement of theoretic teaching, doing well in experimental teaching is a important sector of the automatic control teaching.
理论分析和实验表明，基于双闭环重复控制的并网逆变器具有较高的输出电能质量和较低的并网电流谐波畸变率。
Theoretical analysis and experimental results verify that the dual closed loop repetitive control based inverter has high output energy quality and low THD of grid-connected current.
自动控制理论是该院电子类专业的专业基础课，搞好本课程的实验教学是整个教学过程中不可或缺的环节。
The theory of automatic control is a basic course of the electronics specialties, doing well in experimental teaching is a important sector of the teaching progression.
最小激光能量的估算以及能量与板料变形的实验研究为板料变形的精确控制和预测提供了理论依据。
By studying on the calculation of minimum laser energy and the deformation experiment, the paper provides exactly a theoretical foundation for controlling and predicting deformation of sheet metal.
本文从等离子体吸收激光能量的理论入手，采用提升喷嘴的实验方法，系统研究了电磁场参数对等离子体控制的影响。
According to the theory that plasma absorbs laser energy and with the experiment method which elevates the nozzle during welding, the effect of magnetic field on plasma control is discussed.
结合PID算法的基础原理，经过适当的理论推导、实验验证，提出了预置PID控制算法。
The proposed prearrange PID control algorithm based on the basic theory of algorithm with some theory ratiocinations, experiment validity.
因此，利用实验装置研究TCSC的基本运行特性及其控制策略具有重要的理论和实际意义。
Consequently, it is of great importance to develop experimental setup of TCSC for the investigation of its basic operation characteristics and control strategy.
本文应用模糊逻辑理论，进行模糊推理计算，设计了一类温度控制器，并进行了大量实验，控温较为满意。
The paper has designed a temperature controller by applying fuzzy logical theory and doing fuzzy deductive calculation.
最后，搭建了压电悬臂梁结构主动振动控制的实验平台，对理论分析结果进行了验证。
At last, experimental platform for a piezoelectric cantilever beam is set up, and the theoretical analysis has been verified by experiments.
CAE平台作为一个一体化的环境，能支持FACTS装置控制器设计的整个生命周期，即理论设计、数字仿真、在线调试、动模实验和实时运行。
CAE platform can support the whole cycle of the design of FACTS equipment, including theoretical design, digital simulation, regulation on line, physical experiment, and real time operation.
理论分析和仿真实验结果表明，该控制算法不仅能满足馈源轨迹跟踪高精度要求，而且具有较强的鲁棒性。
The theoretical analysis of and simulation experiments on the flexible Stewart platform indicate that the phatform has higher tracking accuracy and stronger robustness.
实验结果与理论分析基本一致，为高性能直线电机伺服控制器的改进设计提供了客观数据。
The results of experiment justify the validity of the analysis model, which is useful for the further design of high performance servo controller of PMLSM.
本文讨论了随动系统时间最优控制的模拟实现方案以及系统物理实现的理论和技术问题。实验结果得出了一些有用的结论。
The optimum time control servosystem was tested and its realistic physical and technical problems were discussed. The results of the experiments presented some beneficial conclusions.
通过理论分析和控制原理可行性实验研究，证明该阀的控制原理完全可行，而且可使分流误差初步控制在1%以内。
Both the theoretical analysis and the experimental research show that not only the control principle is feasible but also the flow-division error can be controlled within 1%.
单分子控制旋转实验，预测，测试和与F1-ATP酶停止实验的比较的理论。
Theory of single-molecule controlled rotation experiments, predictions, tests, and comparison with stalling experiments in F1-ATPase.
本文从理论和实验两方面研究了级联型多电平变流器及CPS - SPWM控制策略在有源电力滤波器中的应用。
In this paper, the cascade multilevel converter based on CPS-SPWM and its application to Active Power Filter has been deeply studied in theory and practice.
对适合直线电机直接推力控制的方法进行理论分析和实验研究。
Direct thrust force control method for the linear motor in theory and experiment has been further studied.
该研究为有效地控制车削加工毛刺的形成与变化，确保加工质量提供了理论与实验依据。
The theoretic and experimental basis to restrain or decrease the feed-direction burrs in turning are made in this study.
本文的研究工作主要是对压电分支电路阻尼技术应用于柔性悬臂梁的半主动振动控制进行理论和实验研究。
In this thesis, the application of piezoelectric shunt damping technique to semi-active vibration control of a cantilever beam has been investigated theoretically and experimentally.
对共轨系统油轨压力的控制方法进行了理论与实验研究。
The overflow control method of pressure in common rail has been studied through theory and experiment.
理论分析和实验结果表明，该控制系统具有良好的工作性能，验证了所提出控制方案的有效性。
Theoretical analysis and experimental results show that the control system has good performance, and demonstrate the effectiveness of the proposed control approach.
对自动控制理论中典型控制环节虚拟实验系统的工作原理和实现方法进行了研究。
This paper discusses the working principle and designing method of virtual experiment system of typical control loop for automatic control theory.
应用推荐