被控接收器接收遥控器的信号，然后控制现场设备的运行。
The latter receives the signal from the former, and controls the run of equipments on the spot.
简述了自动化系统是如何通过控制现场设备来调整水处理工艺的。
This paper briefly introduces how the automatical control system adjusts the technique of the waste water treatment by controlling the equipments on the spot.
中心工作站检测和控制现场设备，动态显示工艺流程和现场数据并报警，统计查询生产信息等。
Center workstation tests and controls field equipments, dynamically display technical process, field data and alarm, production information for statistical query.
所以这次设计过程中，为提高系统可靠性，用工控机作为上位机，PLC作为下位机，控制现场设备运行。
So this design process, in order to improve the system reliability, with industrial PC as PC and PLC as the next place machine, control site equipment operation.
现场运行证明，该装置运行可靠，并能配合自动化系统完成测量、控制和设备的管理维护功能。
The site operation proves that the equipment is reliable and capable of carrying out the measuring, control and device management and maintenance functions together with automation system.
卖方应限制它的供应范围到马达控制中心(MCC)，但是要包含所有必须的控制和数据测量用的现场设备或仪器。
The SELLER shall limit its scope of supply up to Motor control Center (MCC) but to include all necessary field devices or instrumentation for control and data measurements.
计算机联锁子系统(CBI)作为现场的基础信号设备，主要控制站内的道岔，为进出站的列车提供安全进路。
The computer interlocking subsystem (CBI) is used as the basic signal equipment on the spot, which mainly controls the turnout in the station, and provides a safe way for the train in the station.
昨天厂里一台设备的控制柜出了故障，可是控制柜的空间很狭小，我就摘掉了安全帽在现场处理。
Yesterday, something wrong with the control cabinet, because of limited space inside the cabinet, I shot the trouble without the helmet on my head.
RS232和PROFIBUS - DP协议转换接口可嵌入现场设备作为智能从站，实现数据采集和控制等多种功能。
RS232 and PROFIBUS-DP protocol convert interface can embed in the process control equipment as Intelligent Slave Station, that realize many functions as data collect and control.
井下控制分站实现对井下现场设备的直接控制，同时完成设备运行状态及各种保护信号的采集与传输。
Control substation underground realizes to direct control for the field apparatus, at the same time, to collect and transmit of different kinds of guard signals and equipments running status.
最后，本文重点放在工业以太网的现场设备层，对底层设备的控制、对现场数据的采集、对数据的网络通信都分别进行了详细的讨论与研究。
Finally, we focus our mind on the field devices layer of the industrial control system, study the device control data collection and the data traffic in detail.
在对SZ绞合成缆机设备组成简介的基础上，设计了基于模糊神经网络的SZ绞合成缆机现场总线控制系统。
After brief introduction of equipments of SZ stranding machine for optical fibers, this paper designs SZ stranding machine field bus control system based on fuzzy neural network.
随着工业自动化程度的提高，现场控制对部分信息交换设备的安装、维护、移动提出了严格的要求。
With the advance of the level of the industrial automation, the field control brought forward strict requirements for installment, maintenance and move of part of information exchange equipments.
中间层由带以太网接口的现场控制单元设备PLC组成；
The middle layer is composed of the field control unit device PLC with Ethernet interfaces.
根据试车现场实际监控情况的需求，设计了合理的控制方法并选择合适的硬件设备。
According to the requirement of the supervisory and control circumstance in the test running bed field, this scheme designs reasonable control methods and chooses appropriate hardware equipment.
本地主控机通过RS485总线向现场信号采集设备发送控制指令并接收采集的测试数据，从而实现对rs485总线通信的控制。
The local controller sends steering order to field signal-acquisition equipments and receives test data from RS485 bus, thereby communication control of RS485 bus was realized.
IBP提供符合各相关系统要求的触点引入其控制回路，实现对现场设备的控制功能。
The IBP controls the field equipment by setting up contact points that are in line with the requirements of the relevant systems and by including these points in its control loop.
现场总线是一种串行的数字数据通信链路，它沟通了生产领域的基本控制过程之间以及与更高层次控制过程的自动化控制设备之间的联系。
Field bus is a kind of serial digital data communication chain way, it links up to basically control in production field and high levels control course in the automation's control equipment.
现场使用结果表明，该生产线机械设备可靠、控制系统精度高，产品质量达到或超过国内同类产品水平。
The application results show that mechanical equipments are reliable, control precisions are very good and the products quality is the same as or better than similar line in China.
证明了CP 341模块在和其它设备采用这种协议通讯时稳定可靠，这种协议转换方法很适合控制现场使用。
It proves that CP341 module is stable and reliable to communicate with other equipment based on this communication agreement, and the agreement is very suitable to use on field.
将CAN现场总线技术应用到控制现场底层设备与主控IPC的通讯，实现测控信息处理的现场化。
The CAN Field Bus causes the information to be processed in control field and realize the communication between the control field equipment and the host IPC.
在轮胎厂中，计算机网络控制技术主要由四部分组成：网络服务器系统、厂级管理站、车间管理站、现场运行设备。
In tire factory, the computer net work control mainly consists of net work servicer system, plant grade control station, department control station and site operating equipment.
介绍了一种用于焊接现场的气体保护焊的自动混气设备，该设备能精确控制气体混合比例。
This paper introduced an automatic air mixing equipment for gas protection welding at work site, which can control the accurate proportion of airs.
覆盖工业界质量控制的各个方面，从设计阶段到供货商的资质，以及设备制造、工程现场的质量控制。
Covering each aspects of quality control in industrial field, from design stage to supplier qualification, equipment manufacture, and on-site construction quality control.
运行结果表明，该网络能更好地进行现场设备控制和管理，为实现真正用户终端级的、高安全性的控制提供了一个新的解决方案。
Operation results show that with this network, on-site equipment control and management becomes more convenient, which provides customers with an actual user-terminal class control of high security.
从而实现对现场设备的远程监测、控制、诊断和配置，实现嵌入式系统网络化、智能化。
As a result they can remote monitor, control, diagnose and configure embedded system, which endow embedded system with network and intelligence functions.
设备经过了精度测试和抗干扰测试，证明能应用于工业控制现场。
The devices had passed the EMC test and precision test, can used in the industrial field.
BOX3000长丝打包机是以现场总线控制技术为基础的机电一体化设备。
UNI - BOX3000 baler is an electromechanical integration device based on fieldbus technology.
论文结合一个工程实际项目，对基于现场总线技术的电线电缆生产设备控制系统设计方法进行了研究，并在此基础上设计了某汽车用低压电线的生产设备控制系统。
Combine a actual project, the thesis introduce a control system of equipment based on the PROFIBUS field bus technology, and design the control system of the low-voltage wire and cable of automobile.
论文结合一个工程实际项目，对基于现场总线技术的电线电缆生产设备控制系统设计方法进行了研究，并在此基础上设计了某汽车用低压电线的生产设备控制系统。
Combine a actual project, the thesis introduce a control system of equipment based on the PROFIBUS field bus technology, and design the control system of the low-voltage wire and cable of automobile.
应用推荐