差示扫描量热分析表明，水分散过程破坏了亲水性硬链段的有序性。
Differential scanning calorimetry analysis revealed clearly that order of hydrophilic hard segments was destroyed after water dispersion.
差热扫描量热分析表明偶氮引发剂与纳米碳酸钙螯合后分解温度略有降低；
The results of differential scanning calorimetry (DSC) showed that the decomposition temperature of ACPA decreased when it was chelated onto the particles.
并用示差扫描量热分析和偏光显微镜进行表征，确定其相变温度和液晶织构。
Its liquid crystalline phases were studied using differential scanning calorimeter (DSC) and a polarizing microscope with a hot stage.
差示扫描量热分析表明，RPC的水化反应速度很快，主要的水化过程集中在较短时间内；
The DSC showed the reaction rate of RPC was very fast and main hydration process focused in shorter time;
差示扫描量热分析结果表明，当相对分子质量相差不大时，支化度较高的聚乙烯具有较低的熔点。
DSC analysis showed that polyethylene with higher branching degree had lower melting point when relative molecular masses of the polymers were approximate.
采用差示扫描量热分析(dsc)仪和快速黏度分析(rva)仪对抗性淀粉样品的应用特性进行了分析。
Differential scanning calorimetry (DSC) and rapid visco analyser (RVA) were used to determine the application characteristics of resistant starch (RS) prepared from various starch sources.
采用扫描电镜(sem)和差示扫描量热分析(DSC)对复合相变储热材料的结构和热性能进行了表征。
The structure and thermal properties of PCMs were then characterized by means of SEM and DSC.
运用差示扫描量热分析、动态力学分析、交流复阻抗谱、扫描电镜和原子力显微镜对体系性能和形态进行了研究。
DSC, DMA, complex impedance analysis, SEM, and AFM were used to investigate the properties and morphology of the system.
研究了一种耐热聚乳酸，并对其进行了红外光谱、示差扫描量热分析、热重分析、X-射线衍射、热收缩及断裂强力等测试。
The heat resistant poly(lactic acid) was studied, the structure and properties were characterized by FTIR, DSC, TG, X-ray diffraction, heat shrinkage and breakage strength.
本文采用热机械分析（TMA）和差示扫描量热分析（DSC）等实验手段，对不同成型工艺和预热处理条件下的PET试样进行了研究。
In the paper, the samples of polyethylene threphthalate (PET) under the different shaping techniques and heat treatment conditions have been studied by means of TMA and DSC methods.
探讨了相应共聚物在发泡和热处理过程中发生的“原位成环”反应及机理，并利用差示扫描量热分析（DSC）和红外光谱（FTIR）进行了验证。
The mechanism of in-situ cyclization during the foaming and heat treatment was studied using differential scanning calorimeter (DSC) and Fourier transform infrared spectrometer (FTIR).
实验研究了松香型成核剂在聚丙烯（PP）中成核增透效果的影响因素，并通过偏光显微镜（PLM）和差热扫描量热分析（DSC）探讨了其中原因。
Some factors affecting the transparency of the abietyl nucleating agent for PP were studied, and some reasons were investigated by PLM and DSC.
用差示扫描量热仪与扭辨分析检出了四氟乙烯-六氟丙烯共聚物熔体中的转变。
The transition in the melt of FEP copolymer was detected by differential scanning calorimeter and torsional braid analysis techniques.
采用差示扫描量热法(dsc)，分析了歧化态合金粉末的脱氢-再结合行为。
Differential scanning calorimetry (DSC) was used to characterize the desorption-recombination behaviour of the as-disproportionated alloy powder.
叙述了差示扫描量热仪(DSC)在橡胶组分分析，橡胶配合剂的选择，橡胶的质量评价等橡胶配方研究中的应用。
Application of differential scanning calorimetry (DSC) to analysis of composition, selection of ingredients and evaluation of quality etc of the compounds were related.
采用差示扫描量热（DSC）和热失重分析（TGA）研究了含萘环结构的氰酸酯树脂的固化反应和耐热性能。
The cure reaction and thermal properties of a novel dicyanate ester resin containing naphthalene ring were characterized by differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA).
目标化合物经IR，1HNMR和元素分析仪确证了分子结构，运用差示扫描量热仪（DSC）测定了液晶相态温度范围。
The structure of the liquid crystal compound was confirmed by IR, 1HNMR and elementary analysis. The phase transition temperature of it was measured by DSC.
介绍了热分析法在食品蛋白质研究中的应用，及该方法的原理和特点，详细论述了差示扫描量热法在食品体系各类研究中的各种应用。
This review introduces the application of thermal analytical methods to studies on protein in food systems. Its principle was demonstrated in brief, and its application was introduced in detail.
用差示扫描量热法分析了6种作物幼苗线粒体极性脂和磷脂酰甘油（PG）的热致相变。
The thermal response of seedling mitochondria polar lipids and phosphatidylglycerols (PG) from 6 species of crops was investigated by differential scanning calorimetry.
运用差示扫描量热法(dsc)等分析手段研究了PET -PBT共聚酯的结晶性能。
The crystallization property of PET-PBT copolyester has been investigated by means of differential scanning calorimetry (DSC) and X-ray in this paper.
采用差示扫描量热仪(dsc)和热失重分析仪(TGA)研究了环氧沥青的固化行为，玻璃化转变和热稳定性，并与纯沥青进行了比较。
The cure behavior, thermal stability and glass transition behavior of epoxy asphalts were investigated by using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA).
利用红外光谱、差示扫描量热法分析技术对改性树脂的结构及固化反应过程进行了研究。
The structure and curing of the modified phenol resin were investigated by means of IR spectra and DSC methods.
采用热重和示差扫描量热技术(TG - DSC)对改性前后煤沥青的热解行为进行了分析。
Thermal behavior of modified coal tar pitch was analyzed with thermogravimetric and differential scanning calorimetry (TG-DSC).
热分析法包括热重法、差示扫描量热法及其它。
Thermal Analysis includes thermogravimetry, differential scanning calorimetry and others.
通过示差扫描量热计(dsc)分析证明，片状银粉表面能量大小与粉末的物理状态有关。
By means of DSC, the results of investigation showed that the level of surface energy of flaked Ag powder was correlated with physical state.
本文利用差示扫描量热法对硫镓银进行了热分析动力学研究。
The thermal analysis kinetics of AgGaS2 crystal was studied by differential scanning calorimetry (DSC).
对自然气候条件下塑木复合材料的宏观质量变化及颜色变化进行了分析，同时采用差示扫描量热技术对其热学变化特征进行了分析。
The weight and color change of wood plastic composites was analysed and the thermal characteristic was studied by using differential scanning calorimetry under natural weather.
并举例说明了差示扫描量热技术在大豆蛋白分析中的应用。
Moreover, the applications of differential scanning calorimetry in soybean proteins are also discussed.
该共聚物的分子量用特性黏数表示，用扭辫分析(TBA)和差示扫描量热(dsc)研究了它们的热性质。
The thermal properties of the copolymers were characterized with torsion braid analysis (TBA), differential scanning calorimetry (DSC).
利用扫描电镜SEM、差示扫描量热法(dsc)、热失重(TG)对这些材料进行了表征分析。
Analysis methods such as SEM, DSC, TG were applied to characterize the composites.
应用推荐