并对本嵌入式控制系统的后续工作给予了设想和规划。
The following work of embedded control system is assumed and marked out.
本论文讲述了剑杆织机嵌入式控制系统的设计和实现。
This paper is about the designing of Embedded control system of rapier loom.
针对某型双撚机，研究开发了新型的数字式控制系统。
Aiming to a type of double twister strander, a newly digital control system have been developed.
快速原型设计技术可以极大地提高嵌入式控制系统的开发效率。
The technology of rapid prototype can significantly improve the development efficiency of embedded control systems.
精确时钟协议IEEE1588在分布式控制系统中应用广泛。
Precise clock protocol IEEE1588 is used widely in distributed control systems.
设计了一个基于MCS-51单片机控制的水温数字式控制系统。
The paper designs a digital controlling system of water temperature based on MCS-51 microprocessor.
实验结果表明该智能位置控制器适用于航空发动机分布式控制系统。
The result indicates that the smart position actuator can be applied to aeroengine distributed control systems.
结合集散式控制系统的特点，设计了一种嵌入式啤酒糖化控制系统。
Integrating the decentralized control and embeddability idea, a beer saccharification control system is designed.
嵌入式控制系统一般用于对系统响应时间要求较高的专用计算机控制系统。
There is a pretty strict limit of reliability, cost, volume and energy-consuming, embedded computer control system is applied for firm and responding circumstance.
CAN总线是一种串行通讯协议，适用于分布式控制系统的底层网络通信。
CAN bus is a serial communication protocol and ADAPTS to bottom layer communication of distributed control system.
各现场站采用基于现场总线的分层分布式控制系统实现各现场站的监控功能。
All local stations play the role of monitoring and control by the hierarchical distribution system based on field bus technology.
各现场站采用基于现场总线的分层分布式控制系统实现各现场站的监控功能。
The field stations adopt hierarchical and distributed monitoring and control system based on the field-bus, which realize the function of monitoring and control.
提出了基于CAN总线的分布式控制系统通讯协议，并在实物模型上调试通过。
The communication protocol based on CAN buses was proposed and has been tested on the physical model.
讲述了分布式控制系统中用于提供设备访问服务的设备服务器软件的实现方法。
This article describes the device server software used to provide device access service in distributed control system.
嵌入式控制系统在执行复杂测量与控制任务的同时，常需要测量外部信号的频率。
Frequency of external signals is constantly needed to be measured when complex measurement and control instructions are executed in an embedded system.
介绍了横河公司的分布式控制系统CS3000在离子膜烧碱生产过程中的应用。
The application of Yokogawa distributing CS3000 controlling system in ionic membrane caustic soda production was introduced.
基于这个控制方案，一个回转干燥窑分布式控制系统已经建立在某有色金属冶炼厂。
Based on the scheme, a distributed control system for the rotary dryers has been established in a nonferrous metals smeltery.
介绍了由一个主机、多个终端机组成的用于变压器油色谱在线监测的分布式控制系统。
The distributed control system for chromatograph on-line monitoring of transformer oil is introduced, which is composed of a master computer and several terminal computers.
针对管道焊接机器人设计了一个双处理器的参数调节、实时控制功能的交互式控制系统。
A dual processor interactive control system with functions of welding parameter regulation and real-time control is designed and implemented for pipe welding robots.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯，组成了步式控制系统。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
本文讨论了一个模块化、开放式控制系统的概念，以及如何实现这两个要求的基本方法。
Here it discusses the concept of modular and open type control system and the basic way to realize the two requirements.
本文中，我们目前正在进行的工作是设计和开发一个基于控制代理的网络分布式控制系统。
In this paper we present the work in progress to design and develop an agent-based network-distributed control system.
可以说大至航天器、飞机、军舰，小到车床、电视、手机都有嵌入式控制系统的用武之地。
From spacecrafts airplanes, warships to lathes, televisions, cellphones, applications of embedded control system are very broad.
随着面向对象技术的引入，面向对象集散式控制系统的软件设计可以超前于硬件环境的设计。
Following the introduction of object-oriented technology, the software design of DCS system can be done prior to the design of hardware environment.
基于DSP的四轮转向控制器应用研究，为进一步开发工程机械分布式控制系统奠定了基础。
Through the applications studies of FWS Controller based on DSP, lay the foundation of distributed control system of construction machinery study.
本系统采用分散式控制系统，有效地弥补了传统的单台秤控制、计算机集中控制带来的不足。
The system used dispersion control system that made for the insufficiency of traditional single balance control and computer concentrated control effectively.
传统虚拟分布式控制系统（DCS）中的人机界面开发工作量大、逼真度不高，且不易修改。
The workload of HMI(Human-Machine Interface) development in the traditional virtual DCS(Distributed Control System) is heavy, while its fidelity is low and the modification is difficult.
传统虚拟分布式控制系统（DCS）中的人机界面开发工作量大、逼真度不高，且不易修改。
The workload of HMI(Human-Machine Interface) development in the traditional virtual DCS(Distributed Control System) is heavy, while its fidelity is low and the modification is difficult.
应用推荐