应力带桥是近年来逐渐被人们认识并采用的一种新型的桥梁结构形式。
The stress-Ribbon Bridge is the later-model of bridge structure that is known and adopted in recent year.
本文研究了带裂纹混凝土梁的应力腐蚀断裂问题。
Stress corrosion cracking problem of concrete beams with crack is studied in this paper.
详细讨论了基于有限元分析的钢筋混凝土和预应力混凝土楼板的板带截面设计方法。
The section design method of slab strips for reinforced concrete and post tensioned concrete slabs is discussed in detail.
弹孔周围的绝热剪切带沿主剪应力方向形成，与静态塑性变形滑移线方向接近，绝热剪切带上不均匀的变形将产生微裂纹和微孔洞。
An adiabatic shear band formed along the main shear stress around the penetrated hole is approximately consistent with the direction of plastic deformation slip lines in static state.
提出了一种带腋撑的新型钢筋混凝土(含预应力混凝土)框架结构。
A new kind of reinforced concrete (including prestressed concrete) frame structure with diagonal member is put forward.
研究结果表明具有大的应力敏感性的非晶带材料可用来制作力传感器。
The research results show the force sensors can be constructed using amorphous alloy materials with high stress sensitivity.
本文利用数值模拟实验，分析了不同出口速度下的模具应力、模具温度和模具工作带尺寸的变化规律。
By the test of numeric simulation, under various exit velocities the changed rules of stress, temperature and land size about the die are analyzed in this paper.
为了解决带预应力的组合结构拓扑优化问题，提出了组合结构优化算法的基本思想。
In order to deal with the problem of combined structural topology optimization, a basic algorithm idea is proposed.
研究了动载荷作用下带裂纹厚壁筒的应力强度因子。
We study stress intensity factor of thick wall cylinder with cracks under dynamic load.
用此方法对梯形齿同步带一个齿上的平面问题的应力分布进行了有限元分析研究。
By this method, it researches the stress distribution of plane problem for a tooth on synchronous belt.
掘进煤巷工作面应力“三带”分布对延时突出起着关键作用。
The "three area" distribution of stress in coal driving is a key factor for delaying the outburst.
对全球不同区域的地震静态应力触发情况的研究表明，消减带“地震对”的触发效应较为明显。
The research on seismic static stress triggering in different regions in the world indicates that triggering effect is significant in subduction belts.
文中用带屈服应力的假塑性流体描述驱替液性质，用宾汉流体描述原油性质。
The displacing fluid of power law fluid with yield stress and displaced fluid of Bingham are used to illustrate these effects.
试件端面效应直接影响试件内的应力分布、试件破坏形式和剪切带图案。
End constraint has an influence on distribution of stress in rock specimen, failure pattern and pattern of shear zone.
本文提出了一种转动结构用于铜合金冷轧板带残余应力检测以及面内形变的测量方法。
In present paper a new rotating-structure was introduced to detect local residual stress and in-plane deflection in thin cold-rolled sheet of copper alloy.
通过磊口大桥工程实例，对带挂梁的预应力混凝土T型刚构桥的设计进行总结。
By a actual engineering example in Leikou bridge, the design of prestressed concrete T-frame bridge hanging a beam.
本文结合福建会堂工程结构设计实践，介绍了带平托板预应力无梁楼盖的结构设计方法。
Combined with Fujian Hall's structural design practice, unbonded prestressed flat slab with drop panel design procedure is introduced in this paper.
运用光弹性理论及测试技术，对抽油机用新型圆弧齿同步带的应力分布状态进行了光弹性实验研究。
The authors, by photoelastic technique, make an experimental investigation in the stress distribution on the new type circular-arc-teeth synchronous belt.
由于模具工作带附近的应力和温度均较其它部位大，从而使得模具工作带成为挤出模具失效的主要区域。
Because stress and temperature around the die land is higher than others else, the die land will become a main area of die invalidation.
提出了通过控制扁平绕带压力容器钢带预应力来控制容器筒体应力分布的寻优设计法。
An optimal design method that can control stress distribution of pressure vessel by controlling prestress of steel ribbon of Flat steel ribbon Wound pressure vessel (FSRWPV) is given out.
最大应力产生在小带轮的整个“静弧”上。
The greatest stress is produced on all"the static arc"of small belt pulley.
最后，通过一个具体算例求出梯形齿同步带一个齿上的最大应力点及应力分布规律并与弹性平面问题的解进行了比较。
Finally, for an example, a maximum stress point and stress distributions of a synchronous belt tooth have been found out and compared with its elastic linear solution.
针对柔性应力传递系统，申请了“一种带盲孔的陶瓷管冷等静压成型装置”的专利(已受理)。
For the flexible stress transfer system, we present an application for patent which is a CIP device for molding a ceramic tube with blind hole.
热动力变质岩带受构造应力集中带控制，是岩石强烈形变与相变的综合体。
All of the dynamothermal metamorphic belts are controlled by the structural stress concentrated zone and they are the complex of the strong deformation and facies change.
对构造配筋、设置应力释放带和使用微膨胀混凝土等控制裂缝的有效措施进行了讨论。
Reinforcing concrete wall, grooving a stress-release slot in basement wall and adopting tiny expansive concrete are good measures to control the cracking.
从理论上计算了非晶态薄带中不同区域的内应力场和应力磁各向导性。
The internal stress fields and the stress-magnetic anisotropies in different regions of the amorphous ribbon were calculated theoretically.
本文应用流变学有限元法，建立了韧性剪切带内的温度、应力、应变和位移之间的关系。
The relations between temperature, stress, strain and displacement on ductile shear zone are established by using theory of rheology and finite element method.
计算了1893年以来在断裂带南东段(相对闭锁段)的应力积累，示出相应的最大剪应力和流体静应力等值线图。
The stress accumulation in the southeastern segment of the fault since 1893 has been calculated, and the corresponding contours of maximum shear stress and hydrostatic stress are shown.
它可使被矫带材产生纵向拉伸应力和横向弯曲应力。
It can provide the strip with longitudinal tensile stress and transverse bending stress.
它可使被矫带材产生纵向拉伸应力和横向弯曲应力。
It can provide the strip with longitudinal tensile stress and transverse bending stress.
应用推荐