结合某实际工程节点的模型试验，应用有限元软件对其进行数值分析。
Numerical analysis is applied with FEM software on the typical joint experiment of one building project.
一个Leo工程被组织为一组要点，这些要点基本上是一个对应到程序中的分层的可折叠的内容(节点)树。
A Leo project is organized as a collection of Outlines, which are basically a hierarchical and collapsible tree of things (nodes) that go into a program.
但现在国内外对一些在工程中常见的KT型和KX型空间相贯节点的研究还很少，给这类节点的推广和应用带来的不便。
But now, the research on the multiplanar KX -, KT-joints that have been used in many projects is little, which brings some inconvenience to the extension and application for this type of joints.
设计这种特殊的节点并且理清节点构造中力的传递是工程实践对科技工作者提出的要求。
It is the challenge to design the special joint and master the mechanical performance of the joint for structural engineer.
笔者在全寿命周期理论的视角下主要研究决策设计阶段和招投标阶段两个关键节点的工程造价控制。
Under the whole life cycle theory, I think I study the design phase and bidding phase of the two key nodes in the project cost control.
随着螺栓球节点网架在悬挂吊车工业厂房中的推广应用，其疲劳性能成为工程界多年来尚待解决的热点问题。
With the popularization and application of this structure in industrial factory with suspended crane, the fatigue performance becomes the hot problem to be solved for many years in engineering circle.
介绍了施工现场的工程概况及螺栓球节点网架的施工工艺和施工方法，并收到了良好效果。
The engineering survey and construction process and method of bolted ball joint net frame are introduced, and good result has been achieved.
空间相贯节点由于美观、力学性能优异等优点，在工程中大量使用。
Space intersecting joint is widely used in project due to its fine appearance and mechanics performance.
结合工程实例介绍了人工注浆法的施工工艺、灌注浆的模拟试验及抗浮锚杆的节点防水处理措施。
This paper introduces the artificial grouting construction process, the slurry infusion simulation and anti-floating anchor node waterproof treatment according to an engineering case.
针对工程结构中广泛应用的变截面构件，提出了一个变截面平面梁单元，推导了其单元刚度矩阵和等效节点荷载公式。
A nonuniform beam finite element is presented and the element stiffness matrix and equivalent joint load are derived to analyse nonuniform members used increasingly in engineering structures.
有限元的实质就是将工程结构离散为各种单元以节点连接的计算模型。
The essence of Finite Element analyse is FEA about engineering structure dispersed into all kinds of element by using node connection.
对某高层酒店改建工程加层的结构方案和改造设计中梁柱节点的构造细部进行了介绍。
The structural form and the construction of RC column-steel beam joints for an adding storey project are introduced.
由于实际工程中，钢管相贯节点的尺寸一般比较大，足尺试验研究则更具研究意义。
Because the size of tubular joints used in practice engineering is always large, the full scale tests study is of significance much more.
深入分析空气冷凝器支架结构的结构性能，对其结构体系和典型节点、构件进行试验研究，可为工程设计提供有益建议。
It can be a help for the engineering design to deeply analyze the structure behavior and have an examination research on the typical joints and members in the air-cooled condenser structure system.
介绍了某工程采用门式模板支架的设计要点，在一些特殊节点所采取的构造措施，基础处理和荷载试验，以及施工所取得的效果。
Author introduces the design key points, construction measures at some special joints, basement disposal, load tests, and construction effect of a gate scaffolding applied in a project.
为适应该工程的特点，幕墙的各个节点均采用了独特的设计。
Special design has been made for all nodes of the curtain wall in accordance with the project characteristics.
本文还使用VRML的PROTO扩展功能，编写了工程力学支座节点的VRML造型，使用起来很方便。
This paper gives some PROTO node types about VRML too, which could be easily applied to Engineering Mechanics net teaching.
节点湖泊水资源库存的协调控制是南水北调工程运行管理中的重要研究内容之一。
Coordination and control on water inventory of the node lake is an important content in operation and management of South-to-North water Transfer Project.
本文介绍了工程结构体系特点、结构分析和设计，节点构造，可供类似设计参考。
This paper mainly introduces the system characteristics of structure, analysis and design of the structure, node structure, it can offer reference to similar engineering design.
基于试验数据并结合实际工程，提出了空间钢桁架结构内力计算模型，及有关节点域设计的初步建议。
Based on the test results and the practical engineering, the calculate mode of the air-cooled condenser structure system and the original design methods about the joint are pointed out.
本文详细研究了节点有限差分运动方程的推导过程，以及在岩土工程问题中的应用。
The text is detailed to study the deducing process of the nodal finite difference equation, and to study its application hi the rock mass engineering problems.
结合实例介绍了使用节点压力法实现流量优化调节的方法和步骤，为工程应用提供依据。
By example, the node pressure method and steps of the water flow optimal regulation were introduced in order to provide the theory.
而大量的实际工程表明，组合结构的梁柱连接是介于这二者之间的，即应该视为半刚性组合节点。
But a large number of practical projects had shown that the connection of beams and columns in composite structure is between rigidly and hinge connection.
结合实际工程，给出了一般节点及特殊节点的计算实例，可供同类工程参考。
Combined with practical engineering, we give some calculation examples for general joint and special joint for reference to similar engineering.
介绍6度抗震设防下11层钢结构住宅的结构设计，对该工程的结构体系选用、节点构造作了一些研究工作。
It introduces the structure design of an 11-storey steel residence on 6 degree earthquake resistance, the selection of structure system and node construction of it.
介绍了框架扁梁的节点构造要求和配筋详图；在工程应用中的优缺点以及应注意的一些问题。
The paper introduces the constructing requirement of frame flat-beam junction, retailed drawing of reinforcing bars, advantages and disadvantages in engineering application and other issues concerned.
在设计规范与工程实践的基础上，着重论述了梁柱节点不同混凝土强度等级在设计和施工中的处理方法。
Based on design criterion and construction practice, the paper presented the method to treat beam - column node concrete with different strength grade in course of design and construction.
根据对国内储罐子午线网壳工程的调查，发现不少储罐子午线网壳工程在支座节点和杆件拼接节点构造上存在严重错误。
It is found through the investigation on domestic meridian latticed shell projects of storage tanks that some serious structural problems exist in support nodes and bar member connection nodes.
提出了工程实际中，换能器节点位置选取的一些考虑。
Some design considerations about the selection of node location are noted.
通过工程实例介绍了此类桁架节点设计方法，可供设计人员参考。
Based on projects, joint design methods for this kind of truss have been introduced in the paper.
应用推荐