把导管架海洋平台看作钢框架结构，并把多目标优化设计方法用于结构的设计中。
A multi objective design is proposed by assuming the jacket platform as a steel frame structure.
本文从模糊综合评判的角度出发，研究了海洋工程结构的多目标优化设计方法。
The multi-objective optimization design of ocean engineering structure is studied from the view of Fuzzy Synthetic Decision (FSD).
采用多目标优化设计方法不仅可提高车辆自身的舒适性，而且可减小轮胎对路面的动载。
It is shown that using this method not only improves the ride comfort but also reduces the tyre dynamic load to ground.
在MES的工艺管理部分，利用模糊数学方法进行橡胶配方的优化设计，解决了橡胶配方设计中的多目标优化问题。
In the technics management part of MES, use fuzzy mathematics to design compound formulation, resolve the multi-target optimization problem in compound formulation.
最后，对多目标优化方法在飞机结构设计中的最新应用研究做了简要的介绍。
At last, the recent applications and researches of multiobjective optimization methods in aircraft structural design are introduced simply.
行李箱盖外板冲压拉延成形的工艺参数优化是一个多因素多目标问题，针对该问题的特点，采用本文的稳健优化设计方法。
The parameters optimization of the stamping drawing process of the outer panel of trunk lid is a multifactor and multiobjective problem. The robust optimal design was adopted for this characteristic.
本文提出了结构多目标随机模糊优化设计的概念和实现这一概念的具体方法。
The concept of structural random fuzzy multi-objective optimal design and the concrete method of realizing this concept are given in this paper.
数学规划因具有同步优化和同时处理多目标权衡的优点成为同步设计的有效方法。
Mathematical programming method is a powerful tool to perform simultaneous design because it has the advantage of simultaneous optimization and dealing with multiple objectives together.
数学规划因具有同步优化和同时处理多目标权衡的优点成为同步设计的有效方法。
Mathematical programming is a powerful tool to perform simultaneous design because it has the advantage of simultaneous optimization and dealing with multiple objectives together.
针对研究对象，在高度控制系统设计中，引入多目标多约束的随机射线优化方法。
Based on the research object, the random radiation optimization of multitargets and multi-restrictions is introduced into the design of altitude control system.
考虑随机性、模糊性的影响，建立了DH106动力箱的多目标可靠性模糊优化模型，并运用此优化方法，进行了DH106动力箱的可靠性模糊优化设计。
Taking account of the influences of randomness and fuzziness, multi objective reliability fuzzy optimization model of DH106 dynamic box is established, and it is solved by the above mentioned method.
提出了多工位级进模工步设计的多目标最优化组合的数学模型、通用算法以及建立其CAD系统的实现方法。
The mathematics model of multiobjective optimum combination, good algorithms and CAD system for strip layout of multistep progressive die are given in this paper.
提出了连续体结构静力学和动力学多目标拓扑优化设计的模糊-目标规划方法。
A hybrid fuzzy-goal programming scheme for continuum topology optimization with static and dynamic objectives was proposed.
将近似模型方法和多目标优化方法引入高速磨床零部件设计中，建立基于近似模型的高速磨床零部件优化设计方法。
A method for the structural optimization of high speed grinder 'components was built, which was based on the approximate model and multiobjective optimization.
本文根据正交代化设计及模糊综合评判原理结合船舶主要参数优化设计的特点，提出了船舶主要参数的多目标正交代化设计的模糊分析方法。
Based on the orthogonal optimum design and fuzzy comprehensive evaluation, a method for fuzzy analysis of multi-criterion orthogonal optimum design of ship's main dimensions is presented.
所以呢，彼得罗不忙于裸身拍摄Equinox广告的时候，他就发表发表论文，比如《基于反求设计的轴流式涡轮机快速3d多目标多学科优化方法》。
So when Pietro isn't busy posing nude for Equinox ads he's publishing papers like, "An Inverse Design Based Methodology for Rapid 3d Multi-Objective-Multidisciplinary Optimization of Axial Turbines."
对于多目标、多约束条件的四连杆机构优化设计，本文提出了一种基于量子粒子群算法求解的设计方法。
This paper puts forward the design method based on Quantum Particle Swarm optimization for optimization design of four bar linkage of multi-objective, multi-constraint conditions.
前言：简述多目标优化方法，将此方法应用到棒材孔型设计中。
The essay presents multiple target optimization and success in applying design of bar pass.
针对系统逻辑门数对系统容错性能的影响，通过使用多目标优化方法，进一步改进设计系统的容错性能。
Aiming at the fault-tolerant influence of the logical gates, the fault-tolerant performance of the system was enhanced by multi-objective optimization design method.
结合实例建立了ZK蜗杆传动多目标模糊可靠性优化设计的数学模型，给出了优化方法及优化参数。
Based on an example, the mathematical model of multi goals fuzzy reliability optimal design for ZK worm gearing was established. The optimal method and optimal solution on worm gearing were given.
工程设计方法所求得的滤波器参数，可作为滤波器参数多目标优化时的初值。
All these methods are realized by programming under MATLAB. The parameters by the engineering methods can be used as the initial value for the coming multi-objective optimization of filter parameters.
在本方法中，电梯主动导轮结构参数和主动控制器参数同时作为优化设计变量，电梯系统性能和控制代价作为优化设计目标。这是一个复杂的多目标优化问题。
In this method, the structural parameters of the guide roller as well as the active controller are regarded as the design variables, and the system performance and the control cost are optimized.
基于该模糊判决，提出了一种多目标模糊优化设计数学模型求解的理想点法，给出了其详细求解方法和步骤。
On the basis of that fuzzy judgement, a kind of ideal point method for solving the mathematical model of multi target fuzzy optimal design was advanced, and its detailed solving method and steps...
针对多目标优化设计中存在的问题，提出了灰色差异度的方法。
Using grey difference degree, multi-objective optimization design can be converted to single objective optimization.
针对多目标优化设计中存在的问题，提出了灰色差异度的方法。
A new optimization strategy based on grey difference degree is given subsequently, which is used to solve multi-objective optimization design.
将网站信息分类体系优化问题转化成多目标决策问题，并提出分析、评价、设计、实现四阶段网站信息分类体系优化方法。
With changing the Optimizing WIC problem into the Multi- Objective Decision Making (MODM) problem, the dissertation brings up a method for optimizing WIC.
对于多目标优化设计，遗传算法具有比传统优化方法更强的全局寻优能力。
The result shows that the diaphragm spring have better nonlinearity characteristic after optimum design with …
对于多目标优化设计，遗传算法具有比传统优化方法更强的全局寻优能力。
The result shows that the diaphragm spring have better nonlinearity characteristic after optimum design with …
应用推荐