铸渗是一种制备金属基表面复合材料的新技术。
The cast-infiltration is a new technology for fabrication of metal matrix surface composites (MMCC).
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
本文通过离心铸造法研究了球铁基表面复合碳化钨粒子的轧辊。
This paper reports the study of the ductile iron roller recombined with tungsten carbide particles on the surface by using centrifugal casting.
研究铜合金表面铁基渗层的微观组织以及铜基表面渗层的弯曲行为。
The microstructure of surface Fe-based infiltrated layer on copper substrate and the bending behavior are investigated.
本文介绍了温和型淀粉基表面活性剂的合成工艺研究现状和发展趋势。
The present situation and development trend on the synthetic technology of mild starch -based surfactants are introduced.
利用该工艺在钢基表面上得到了不同配比的锌镍以及锌铝镍合金镀层。
By using this new process, Zn-Ni and Zn-Al-Ni alloy coatings with different proportions on steel substrate are obtained.
对铸造烧结法制备铁基表面复合材料，表面复合层的点火特征进行研究。
The casting-infiltration method is one of the main means of preparing particles reinforced surface composite.
在胶片上产生影像的光在通过乳剂时发散，或在乳剂和片基表面发生发射。
Light forming an image on the film is scattered by passing through the emulsion or by reflection at the emulsion or base surfaces.
本文研究用快干涂料法来制造金属基表面复合材料的铸渗表面合金化工艺。
This article studied the Cast-in-face process of Fast-dry coatings for producing the metal matrix composites in face.
而三聚磷酸铝因在钢基表面作用形成致密的保护膜则表现出优良的缓蚀性能。
The triphosphate ion at the interface between the steel substrate and the coating can complex with the corrosion product, such as ferric and ferrous ions, and form a compact p...
从材料的选择、铸渗工艺、及铸渗应用等方面，介绍了国内外运用铸渗法制备钢铁基表面复合材料的新进展。
New development on the fabrication of metal-matrix surface composites with cast infiltration was introduced from the angles of material selection, infiltrating techniques and application.
在固体培养基上，该菌株菌落平坦，气生菌丝短，培养基表面早墨绿色，背面呈黑色，孢子丰富而且颜色深。
The colony of the strain C114 is flat and with black-green color in the surface and black in the rear on the solid medium, it has short aerial hypha and abundant spores.
本文对铸渗技术制备金属基表面复合材料进行了综述，并对铸渗金属基表面复合材料的形成机理进行了分析和讨论，对铸渗金属基表面复合材料的应用进行了介绍。
In this paper, the fabricating technology for MMCC with the cast-infiltration is reviewed. The forming mechanism of MMCC is analyzed and discussed, and the application of MMCC is introduced.
圆屋顶额伟大之处在于它封闭区到外部表面的比例最高，那正是巴基想要的效果。
What's so great about the dome is that it does exactly what Bucky wanted; that is, it has the highest ratio of enclosed area to external surface.
圆屋顶额伟大之处在于它封闭区到外部表面的比例最高，那正是巴基想要的效果。
What’s so great about the dome is that it does exactly what Bucky wanted; that is, it has the highest ratio of enclosed area to external surface.
根据2010年4月28日的宣布，科学家利用美国宇航局的红外望远镜设备已检测到小行星表面有水-冰和碳-基有机化合物。
Announced on April 28, 2010, scientists using NASA's Infrared Telescope Facility have detected water-ice and carbon-based organic compounds on the surface of an asteroid.
“它很薄，而且表面都经过高温加工。”肖恩·奥基夫(SeanO'Keefe)说。他是弗吉尼亚技术学院食品科学的教授。
"It's also very thin, which once again means high heat per surface area," says Sean o 'keefe, a professor of food science at Virginia Tech.
《内心的杀手》也许是汤普森最著名的小说，先前被斯泰西·基齐翻拍过一次，它描述了一个表面温顺实则精神变态的小镇警长。
Filmed once before with Stacy Keach, The Killer Inside Me is perhaps Thompson's best known book, telling the story of a seemingly innocuous smalltown sheriff who hides a psychopathic secret.
在另一方面，罗克表面上看起来的“牺牲”，则完全与基廷不同。
Roark's apparent "sacrifice, " on the other hand, isnothing of the sort.
目的：评价全口义齿基托材料及其表面粗糙度对义齿固位的影响。
Objective: To evaluate the influence of denture material and its surface roughness on retention of upper complete denture .
将该产品喷涂或涂刷在混凝土或大型砌块表面，可显著提高砂浆对基面的粘结力。
Will this product spray or besmear brushs in concrete or large block surface, can significantly improve the mortar of the base of rapping.
并且随着氧化强度的增强，沥青基球状活性炭的比表面积减小，但总孔容增加。
As the intensity of air—oxidation treatment increased, the surface area of the PSAC decreased, but its total pore volume increased.
安装玻璃贴膜和安装所有乙烯基贴膜，都是需要经过良好的表面准备工作和后续简单的步骤，最终呈现出高质量的产品。
Installing perforated window film, as with all vinyl films, starts with good surface prep and continues with simple steps for a quality install.
首先清除缝隙及周边基面的脏杂物或水管表面的铁锈，用湿布擦洗干净。
First, clear the gap and around the base surface of the dirty debris or water surface rust, scrub clean with a damp cloth.
不同预备程序对基牙表面粗糙度的影响。
Effects of different preparation procedures on abutment surface roughness.
然后分子印迹化合物通过与硅胶整体柱上的烯基发生共聚反应从而固定在其表面。
Then the MIP coating was copolymerized and anchored onto the surface of the silica monolith.
晶片等离子体加工室的结构设置成使反应性自由基与放置在晶片等离子体加工室内的晶片表面上的物质反应。
The wafer plasma processing chamber is configured to react the reactive radical with a species at a surface of a wafer disposed in the wafer plasma processing chamber.
晶片等离子体加工室的结构设置成使反应性自由基与放置在晶片等离子体加工室内的晶片表面上的物质反应。
The wafer plasma processing chamber is configured to react the reactive radical with a species at a surface of a wafer disposed in the wafer plasma processing chamber.
应用推荐