介绍了在三相三开关高功率因数变换器中应用复杂可编程逻辑器件(CPLD)实现逻辑控制部分的方案。
This paper introduces a scheme in which a complex programmable logic device (CPLD) is used in the three phase three pole switch high rating factor convertor to realize logic control.
针对指纹图像的采集、处理、显示，提出一种性价比好且易于实现的基于PC机、单片机和可编程逻辑器件的硬件平台。
A kind of hardware platform based on PC, MCU and FPGA is given for fingerprint collection, processing and displaying. It has a good performance and easy to be achieved.
在该系统设计中，以FPGA芯片作为核心器件，通过底层软件编程实现高强度聚焦超声的数字化相位调控。
In the system design FPGA slug as a key device realizes digital phase control of high intensity focused ultrasound through base software programming.
该文讨论了在合成孔径雷达实时成像处理器中，采用子孔径带通滤波成像处理方法的方位预处理的设计，构造了一种用大规模可编程逻辑器件实现方位预处理的电路结构。
This paper describes the design and realization of the azimuth preprocess in the real-time imaging processor of SAR with programmable logic device by the method of sub-aperture using band-pass filter.
针对检测数字图像灰度梯度的最大值法，采用SOBEL边缘检测算子对数字图像进行边缘检测，并利用硬件(大规模可编程逻辑器件CPLD)实现了数字图像的边缘提取。
The article will contrapose maximum value method based on detecting image grey grad, and take example of SOBEL operator to realize digital image fringe picking up based on hardware (CPLD).
地面利用复杂可编程逻辑器件CPLD实现数据的解调。
Complex programmable logic device (CPLD) is finally used in the ground decoding process and then the data is demodulated.
介绍了一种大规模复杂可编程逻辑器件(CPLD)在雷达信号处理系统中动目标检测电路的应用及具体实现方法。
This paper introduces the application and design methods of a large scale Complex Programable Logic Device (CPLD) in radar signal processing system moving target detection circuit.
介绍了一种光纤旋转接头的数据传输技术，并利用EPLD大规模可编程器件实现了光纤中电视信号的数据传输。
A fiber swivel joint data transmission technology is described. The data transmission of TV signal with fiber is realized with EPLD large-scale programmer.
系统以ARM微处理器和FIFO存储器为核心，利用可编程逻辑器件实现对整个底层数据采集系统的逻辑控制，并给出了时序控制部分的仿真波形。
The system controls the logic of the data acquisition board by programmable logic device (PLD) with the center of the ARM microcontroller and FIFO memory and provides the simulate waveforms.
可编程逻辑器件具有器件规模大、工作速度快及可编程的硬件特点，非常适合用来实现DDS。
The programmable logical device has big scale, quick working speed and is programmable which is extremely suitably used to realize DDS.
简要介绍了通用异步收发器（UART）的功能，叙述了这些功能在可编程器件中的实现，提出了对设计进行仿真应注意的一些问题。
The paper introduces the functions of UART, and describes how to implement these functions in PLD, and then it mentions some actual situation about the design simulation .
用PC或者可编程器件取代信号发生器提供控制信号，可以实现高压固体开关的程控功能。
Using PC or programmable devices instead of the signal generator, a high voltage solid state switch controlled by programmes will come into true.
采用可在线编程的单片机作为核心器件实现参数的实时调节；
The MCU, applied as the core unit, is to realize the real time adjustment of parameters.
其中现场端的设计以单片机技术为核心，控制器端的实现以可编程逻辑器件设计技术为核心。
In the field unit the core is Singlechip, and in the central controller is Programmable Logic Device.
传统的数字系统通过设计线路板实现系统性能，而可编程器件是通过设计芯片内部的互联逻辑来实现系统功能。
The programmable digital devices implement the logical function by designed internal logic array block while the traditional digital systems do it by designed printed circuit block.
介绍了一种用eprom可编程器件实现新闻直播自动切换控制的方法，并给出了具体的设计和实现电路。
This paper describes a method to realize automatic switching and control in direct news broadcasting by means of EPROM. The design and circuit implementation is also given.
介绍了MP3播放器的工作原理，并介绍了基于现场可编程门阵列（FPGA）器件的设计思想和实现。
This paper introduces the work principle of MP3 players, and introduces the design thoughts and realization based on FPGA.
利用现场可编程门阵列器件FPGA实现了结构光激光线图像条纹中心线的实时提取。
The use of field of programmable gate array (FPGA) makes the detection of Central Line of structured laser light stripe image implementation in real -time.
本文讨论了用伪随机序列实现加密保护的原理、方法及可编程逻辑器件(PLD)实现的具体方法。
This paper discusses the principle and method of encryption using pseudo random sequence, and gives its implement on PLD.
该方法非常适于采用现场可编程门阵列(FPGA)器件的实现。
The method was very suitable for hardware implementation based on FPGA (field programmable gate array).
分析了高频地波雷达的时序要求，采用大规模可编程逻辑器件CPLD实现了专用定时芯片。
The time-sequence requirements for the radar are analysed, and a programmable timer is realized by a CPLD.
提出了一种采用ISP大规模可编程器件实现高密度HDB3码的一种实验方法。
This paper proposed a way of high density bipolar three HDB3 code based on ISP(in-system programmable digital circuits)device.
主要介绍以可编程门阵列器件构成恒流源核心控制电路的设计思路，通过机电自控装置驱动可调变压器实现新的稳流方法，实验证明这一方法是可行的。
A design method of using GAL to make a constant current source is introduced, proving a new method of current stabilization by means of driving regulated transformer by a controlling device.
利用可编程器件FPGA实现VGA彩色显示控制器在工业现场中有很多的应用。
This paper introduces the implementation of VGA controller based on FPGA, which is widely applied in industry.
详细介绍基于在系统可编程逻辑器件的实验仪的设计与实现，并对在系统可编程逻辑器件的设计流程进行论述。
This paper gives a detailed introduction of the design of a new experimental instrument based on In-System Programmable Logic Device.
并详细介绍了基于MSC-51的软件编程，实现测试过程中对参数的动态补偿以及用低精度的器件实现高精度测量的方法。
Through MSC-51 programming, arrives at the dynamic compensation of the parameter and high accuracy measures with the device of the low precision.
所有的功能模块组合起来后，通过EDA工具进行CPU内核的逻辑综合和功能仿真，最后在可编程逻辑器件上实现这个完整的CPU内核。
CPU core was simulated and synthesized by EDA tools after combine all units. In the end, CPU core was implemented in programmable logic device.
介绍一种针对正、余弦旋转变压器数字转换器（RDC）模块，用复杂可编程逻辑器件（CPLD）技术实现伺服轴角编码电路设计的方案。
This paper introduces the technology scheme to design radar servo shaft encoder circuit by using CPLD on the rotary transformer and RDC module.
在实际的研制过程中，利用CPLD的在系统可编程（ISP）技术和基于VHDL 语言的可编程逻辑器件设计技术实现了雷达数据采集卡的控制模块。
The control module of the radar data acquisition card is implemented by using of the ISP technology of CPLD and the VHDL programming technology.
在实际的研制过程中，利用CPLD的在系统可编程（ISP）技术和基于VHDL 语言的可编程逻辑器件设计技术实现了雷达数据采集卡的控制模块。
The control module of the radar data acquisition card is implemented by using of the ISP technology of CPLD and the VHDL programming technology.
应用推荐