表面可以改变您的创作之前，通过研磨，喷砂，抛光，抛丸或具有覆盖。
The surface can be changed before your creation by grinding, sandblasting, polishing, shot blasting or with an overlay.
根据SSPCSP1的规定，在喷砂处理之前，应当用溶剂将附着在钢材及相邻聚乙烯材料表面的油脂及其他污染物清洗掉。
Oil, grease and other contaminants shall be removed from the steel and adjacent polyethylene surfaces by solvent cleaning in accordance with SSPC SP1 prior to abrasive blast cleaning.
应使用清洁，干燥和压缩空气的方法将残余的喷砂物从清洁的表面去除。
Residual blast products shall be removed from the cleaned surfaces by using clean, dry, compressed air.
混凝土体量的表面处理提供了一个由喷砂和松木条形成的粗糙外表面和光洁的内表面的对比。
The surface's treatment of the concrete volumes provides a contrast between the outside with a rough finish created by a shuttering of sand blasted pine strips and an interior of smooth finishes.
喷砂获得表面结果的感性认识，需要在实践中不断积累，特别要亲自动手操作、实验。
Sandblasting the surface access to the results of perceptual knowledge, in practice need to continue to accumulate, especially to personally get involved operation, experiment.
并且喷砂能在工件表面交界处打出很小的圆角，使工件显得更加美观、更加精密。
And sand can in workpiece surface junction with small rounded corners, make artifacts appear more beautiful, more precise.
金属板的表面粗糙度通过喷砂和刨床加工控制。
The surfaces of metal plates were made by peening with glass spheres and planer.
本公司专业制作CNC手板模型，并辅助以抛光、喷砂、喷漆等表面处理，其效果完全可以同开模具后生产出来的产品媲美。
We specialized in CNC mock up model, and work on surface process like polishing, casting, painting, and the effect is comparable with that of molded product.
本系列机适用于各类重型工件，产品的表面喷砂处理，如各类模具表面的梨地加工（喷砂）、模具咬花及雾面处理。
The machines apply to all kinds of heavy workpiece surface piating, such as all kinds of mould surface pear to processing (sandblasting), mold textured and fog face treatment.
喷砂能清理工件表面的微小毛刺，并使工件表面更加平整，消除了毛刺的危害，提高了工件的档次。
Sandblasting can clean up the small burr on the surface of the workpiece, and make the surface more smooth, eliminate the dangers of the burr, improve the level of the workpiece.
讨论了套筒表面的喷砂处理，选择不同的磨料、时间及压力可得到套筒不同的表面形状及粗糙度。
The sleeve surface processing is discussed, choosing different abrasive, time and pressure will result in different surface shape and rough parameter.
拥有切、模、抛光、打凹、表面喷砂深雕及激光内雕的完整生产流水线。
Have a cut, mold, polishing, concave, deep carving and sandblasting the surface of a complete production line of laser engraving.
纤维桩：依照厂商说明使用预成钻和完成钻进行根管预备。金属桩：对桩的表面喷砂。
FIBER post: Prepare the root canal with the Pre-Shaping and Finishing drills, according to manufacturer's instructions. METAL post: Sandblast the surface of the post.
介绍了钢管内外表面喷砂除锈生产线的主要设备、工艺流程及主要参数，电气系统总体方案设计和程序设计。
The major equipment, process flow, main parameters, overall design scheme and program design of the production line for sand blast both inside and outside the pipe surface are introduced.
在可见的或有害的重新锈蚀发生前，任何表面均不得喷砂。
No more surface is to be blasted than can be prime coated before visible or detrimental re-rusting occurs.
一种小型的射吸式喷砂枪，可用作喷涂喷焊前的表面清洁毛化处理。
A mini-sized sand-blasting gun of ejection-and absorption type, used to clean and roughen the metallic surfaces for thermal spraying.
它既可用于喷砂除锈的金属表面，亦可用于手工或小型风动工具除锈的金属表面。
On steel surface which is removed rust by sand blasting spray, and can be applied on steel surface which is removed rust by hand or machine tools.
结果随着喷砂时间及喷砂压强的增加，以及喷砂颗粒大小的减小，氧化锆表面丧失量增加（P均＜0.05）。
Results The volume loss and height loss were increased with higher sandblasting pressure and longer sandblasting time, but they decreased with larger powder size (all P<0.05).
喷砂的特质导致钢板的不平滑的表面有高低起伏的高低差。
Sand blasting by its nature results in an uneven finish with peaks and valleys in the depth of the panel's surface.
搅拌机的桶体表面均经过喷砂处理，除锈彻底，漆膜牢固，并采用优质耐磨漆喷涂，大大延长了漆面的使用寿命。
The surface of mixer body is sand-blasted for rust-cleaning. The coating is sprayed firmly with high-grade paint of abrasion-resistant so as to extend the lifetime of coating.
搅拌机的桶体表面均经过喷砂处理，除锈彻底，漆膜牢固，并采用优质耐磨漆喷涂，大大延长了漆面的使用寿命。
The surface of mixer body is sand-blasted for rust-cleaning. The coating is sprayed firmly with high-grade paint of abrasion-resistant so as to extend the lifetime of coating.
应用推荐