共轨喷油器高频电磁阀性能检验。
这基本上就像是酒精扮演了喷油器净化剂的角色。
配有常用电控喷油器标准参数数据库。
It contains standard parameter database of often used injectors.
普通喷油器密封性检查。
共轨喷油器密封性检查。
对汽油喷油器进行了静态流量和动态流量的测试。
The static and dynamic flow rate of the gasoline injector ware tested.
结果表明，该方法可实现柴油机喷油器不解体诊断。
Result showed that the method could realize diesel injector diagnosis without disassemble.
凹凸不平，可靠的单级离心泵深，以及喷油器，驱动？
Rugged reliable single stage centrifugal pumps with deep well injectors, driven by Davey's TEFC motor.
本文介绍了柴油机双喷油器燃烧系统的结构和工作原理。
The structure and the principles of twin injector combustion system have been introduced in this paper.
他们是最有效时，位于交叉口，喷油器外径和燃烧室壁。
They are most effective when located at the intersection of the injector outer diameter and the combustor wall.
试验结果验证了电控喷油器的设计精度与加工工艺的合理性。
The result indicates that the design precision and manufacture technique of the electronic control injector are reasonable.
在改进喷油器结构的基础上，在中压共轨喷油系统中实现了预喷。
The pilot injection is realized in medium pressure common rail electronic diesel injection system on the basis of injector structure modification.
本文研制了一套基于辅助弹簧定位的汽车喷油器底座在线检测系统。
This paper designs a in-line measurement system based on accessorial spring orientation, we localized the workpiece by an assistant spring.
解决办法：需检查喷油器的雾化状况以及进气管是否畅通，有无堵塞物。
The solution: Need to check the atomization of the injector and the intake pipe is smooth or not.
喷油器底座是汽车油路中的重要部件，由金属精密冲压、内圆磨削而成。
The injector base, fabricated by metal casting and stamping, is an important part in automobile oil circuits.
从喷油器结构、汽油品质及汽车运行工况等方面探讨了喷油器积碳的机理。
The mechanism for carbon deposit and blocking of fuel injector is studied and researched from the view of structure, gasoline quality and operating conditions.
介绍了具有油束撞击效应的轴针式喷油器在不同柴油机燃烧系统中的应用。
This paper reports experimental results of the mixture formed by Pintle nozzle with impinging head used to diesel engines with different combustion systems.
本模拟过程中利用喷油器进口处的压力波实测值作为性能预测的主要输入数据。
In this simulating procedure the measured value of pressure wave from the inlet of injector is used as major input data for prediction of performance.
本检测系统的研究成功，将会为电控喷油器的实际应用提供了一个良好的测试平台。
The exploitation and research of this test system supply a favorable test platform for the electronic controlled injectors.
从供油量、喷油器、气门间隙和气缸压力等方面进行调整，以达到消烟节能的目的。
Then in order to suppress smoke and save energy, adjustments of fuel flow, injectors, valve clearance and cylinder compression, etc, are performed.
经理论分析和计算发现，短针阀喷油器可以进一步降低针阀对密封座面的冲击应力。
By theoretical analysing and calculating, we find the short needle valve fuel injector can further decrease the impact stress of the needle valve to the sealed conical surface.
分析了柴油机各缸喷油器安装位置误差对统一式燃烧室燃料雾化和燃烧过程的影响。
This paper analyses the influence of the positional errors of installing the fuel nozzles on the fuel atomization and combustion performance in the direct injection diesel engines.
通过优化共轨喷油器液力参数和电磁阀高压驱动电路，改善了高压共轨系统的响应特性。
The response characteristics of the common rail system are improved by optimizing the hydraulic parameters of the injector and the driving circuit of its solenoid.
试验研究了喷油器密封端面磨损对标准喷油器流量的影响，并从理论上进行了分析论证。
The effect of nozzle holder pressure surface wear on flow characteristics of calibrating injector assembly is investigated and analyzed theoretically.
本课题进行了以下设计与试验：（1）测定磁感喷油器的磁敏元件和挺杆之间的最佳间隙。
The experiments as follows are done:(1) Space of magnetism sense organ and needle valve is measured.
全面分析了共轨蓄压式电控喷油器的泄漏部位及影响因素，进行了静态和动态的密封性试验。
This paper analyzes the leakage and its influence factors of the common-rail accumulator type electronic control injector. The static and dynamic sealing test is done.
用数字存储示波器采集发动机转速传感器、喷油器波形，并且运用计算机软件进行分析处理。
The waveforms of engine speed sensor and oil injector are collected by digital storage oscillograph and analysed and handled by computer software.
以电控喷油器为研究对象，在整个流量范围内对其流量特性进行测试并对测试结果加以分析总结。
Taking an electronic controlled injector as an example, the test data gained in the whole flow range have been analyzed and summarized .
试验结果表明较大的A、B量孔尺寸差值和高的共轨压力，可以获得较好的喷油器开启响应特性。
The test result shows that by using bigger dimension difference of control hole A and B and high common-rail pressure the better open response of injector can be achieved.
试验结果表明较大的A、B量孔尺寸差值和高的共轨压力，可以获得较好的喷油器开启响应特性。
The test result shows that by using bigger dimension difference of control hole A and B and high common-rail pressure the better open response of injector can be achieved.
应用推荐