经含钡合金处理的钢材力学性能，如疲劳、横向冲击韧性和各向异性可得到显著改善。
The mechanical properties such as fatigue, transverse impact toughness and anisotropic properties of steels treated with Ba-containing alloys are remarkably improved.
用铌中间合金处理铁水，对所浇注的试样作了耐磨性试验研究表明，当含铌量为0.15 ~ 0.4%时，铌铸铁较普通铸铁耐磨性提高5倍左右。
The wear resistance of niobium alloyed cast iron was studied. Result shows that the wea resistance of cast iron containing 0.15-0.4%nb is about 5 times higher than gray iron.
复合变质处理使该合金中硅相细化，使布氏硬度提高50%，硬度可达HB84.9。
The hardness of the alloys which is modified is advanced by about 50%, appropinquity HB84.9.
具有专业生产五金模具及制品、铝合金面板、散热器、铝合金挤压模具、深加工、氧化着色处理的优势。
Having advantages of specializing in hardware molds, aluminum alloy panels, radiators and aluminum extruding molds, deep processing and heat tinting treatment.
有些合金不阳极处理得很好，所以我尽量坚持使用合金我知道工作。
Some alloys do not anodize very well so I try to stick with the alloys I know work.
最后指出无论从铝合金熔体处理本身的需要，还是与国外的先进除气设备相比，国内的旋转喷吹净化技术都有待开拓。
Domestic spinning rotor technology need to be exploited both in the sense of melt treatment process itself and comparing with overseas advanced degassing equipments was pointed out in the end.
为了采用图像处理与模式识别的方法对铝合金的焊接质量进行智能控制，必须获取铝合金焊接熔池的清晰图像，然后提取焊接熔池的信息。
In order to control the quality of welding by image processing and pattern recognition, the clear image of the welding pool of aluminum alloy and the information of the welding pool must be obtained.
在铍青铜合金上电镀铝，需在镀铝前作特殊的表面活化处理，镀铬时也有不同于钢铁件镀铬的操作方法。
Special treatment is recommended to activate beryllium copper surface before chromium plating. And special steps which differ from conventional chromium plating on steel parts are to be taken.
成功的开发出了市场上领先的铝、铝合金的表面处理技术。
Successful development of the market's leading aluminum and aluminum alloy surface treatment technology.
铝合金棒材经这一方法处理后，可呈现出良好的超塑性能。
After treatment in this way, the aluminium alloy bars present a good superplasticity.
齿轮材料选用高级低碳合金钢，使用自动化高温渗碳淬火处理。
Top low carbon alloy steel as gear material, adapting automatic carburizing and quenching heat treatment.
同时探讨了封接温度、封接时间、金属合金预处理的程度以及保护气氛等工艺参数对封接质量的影响。
Then the technical parameters including sealing temperature, time and the oxidation thickness of metal alloy affected on sealing quality were discussed.
研究了稀土-钛-氮复合变质处理对高硼合金钢组织和性能的影响。
The influence of rare earth, titanium and nitrogen on the structures and properties of high boron alloy steel was researched.
回归再时效处理能够改善合金的腐蚀性能，使合金达到较好的综合性能。
Retrogression and re-ageing treatment can improve their corrosion performance, make the comprehensive properties of alloys better.
研究了镁合金的前处理、防腐涂装以及装饰性涂装工艺条件及其涂膜性能。
The process conditions of pretreatment, corrosion prevention coating, decorative coating and film's performance were studied.
介绍了测量铝硅合金变质处理效果用热分析仪的硬件、软件设计及实际应用。
This paper introduces the design of hardware and software of a thermal-analysis meter for measuring Al-Si alloy modification effect, and discusses its application.
经过HDDR处理后的合金性能好于未经过HDDR处理的合金，经过HDDR处理后产生了软硬磁间的交换耦合作用。
Alloys after HDDR treatment showed better magnetic properties because the exchange coupling effect between the soft and hard magnetic phase was induced by HDDR.
基于含铬处理对环境影响的考虑，世界范围内都在积极开发有效的替代技术，用于铝合金腐蚀保护从而代替铬酸盐转化处理。
Environmental concerns relating to chromate -containing treatment employed for the protection aluminum alloys from corrosion have led to an intensive search for their replacement in the world.
机体采用热处理的铝合金制造而成。
热处理：用于使大多数合金钢产生期望的金相组织特性并把这些组织处于为机加工或者后道工艺最适宜的状态的一种工艺。
HEAT TREAT: Process used on most alloy steels to provide desired metallurgical properties and to put them in the most suitable condition for machining or other subsequent operations.
由于渗氮钢的合金比例，它们比普通钢更强，也容易热处理。
Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.
结果表明：多重固溶时效热处理可以显著提高合金的塑性和断裂韧度，而对强度的影响不大。
The results showed that multiple solution and aging treatment had a significant effect on increasing plastic property and fracture toughness, although had little effect on strength.
达克罗的应用范围很广，它不但可以处理钢、铁、铝及其合金，还可以处理烧结金属，以及特殊的表面处理。
Dacromet has a wide range of applications. it not only can be used to treat steel, iron, aluminum and its alloys, but also can handle sintered metal, and the special surface treatment.
锻造处理对合金硬度和导电率的影响不明显。
The effect of forging on hardness and conductivity of alloy is unconspicuous.
通过对新型铝合金时效处理后的组织结构进行分析，研究了不同的时效温度和时间对该铝合金力学性能的影响。
The effect of aging temperature and aging time to new-type heat-resisting aluminum alloy forging structure and properties are introduced.
分级时效处理，低温下先让合金内部的宏观应力松弛，再在较高温度下时效，可有效地避免棒材纵向开裂。
However, stepped aging, which relaxes internal macro-stress under lower temperature then ages under higher temperature, can avoid longitudinal cracks effectively.
该非晶合金出现晶化的温度随热处理时间的增长而降低。
It has been found that as the heating time increases, the crystallization temperature of the amorphous alloy will decrease.
该非晶合金出现晶化的温度随热处理时间的增长而降低。
It has been found that as the heating time increases, the crystallization temperature of the amorphous alloy will decrease.
应用推荐