本文对绿色资源胶原合成复合材料的研究进行综述。
In this paper the study of collagen synthesized to new composite materials is summarized.
讨论了热力学、物质平衡和动力学原则在固态置换反应原位合成复合材料中的应用。
The applications of the principles of thermodynamics, mass balance and kinetics to the synthesis of in situ composites through solid-state displacement reactions has been discussed.
本文研究了昆虫外甲壳的细观结构特征，这些结构特征为人工合成复合材料提供了一些有益的启示。
In this study, the structure of the exoskeleton of the insect was investigated for structural characteristics that may prove beneficial to advanced composite efforts.
复合材料，比如以光纤玻璃和碳纤维合成的塑料树脂，已经在车辆、飞行器等产品制造中广泛代替金属。
Composites such as fibreglass and carbon fibre bonded in a plastic resin are already widely used to replace metal in making, for instance, cars and aircraft.
采用燃烧合成技术制备多孔碳化硅基复合材料。
Porous silicon carbide based composite was prepared by combustion synthesis technique.
用XRD、IR、DSC和SEM等分析方法研究了聚合物粉末直接熔融嵌入合成聚氧乙烯（PEO）-蒙脱石夹层复合材料的过程。
The synthesis of poly(ethylene oxide)(PEO) montmorillonite composite by direct melt intercalation of polymer powders in layered silicates is studied by using XRD, IR, DSC and SEM, etc.
增强体原位合成避免了其污染问题，也解决了熔铸过程中存在的两相润湿性问题，有利于制备性能更好的复合材料。
Ceramic particle of in situ synthesis avoids pollution and wettability existing in casting technique, so it is valuable to fabricate Fe matrix composite with better properties.
由单质硫与碳纳米管合成一种新型含碳复合材料。
A carbon-containing composite was synthesized by heating element sulfur and carbon nanotubes.
但是，该技术合成的复合材料一般含有较高的孔隙率(20% - 50%)，不能作为结构材料直接使用。
However the synthetized composites have high porosity (20%-50%), which prohibits its use as structural material.
采用聚丙烯腈与单质硫在一定条件下合成了一种新型含硫复合材料。
A novel S-containing polymer for the active composite material of cathode of the lithium ion battery was synthesized by heating polyacrylonitrile and elemental sulfur in certain conditions.
希望静电纺丝技术和水热-溶剂热合成相结合的方法还可以广泛应用于更多的光电功能复合材料的制备。
We hope electrospinning technique and hydro-and solvothermal synthesis can also be more widely used in the preparation of optoelectronic functional composites.
概述了聚苯胺的几种合成方法及其溶解性问胚，并介绍了聚苯胺复合材料及聚苯胺的应用。
This article summarized several kinds of synthesis methods and solubility of polyaniline, and introduced its composites and applications.
本文就自蔓延高温合成技术（SHS）在制备金属—陶瓷复合材料方面的进展进行了回顾；
The improvement of fabricating metal-ceramic composites by means of self-propagating high-temperature synthesis (SHS) is reviewed in this paper.
采用原位合成法制备了稀土硫化物—聚苯乙烯纳米复合材料。
Rare earth sulfide polystyrene nanocomposite materials were prepared by in situ synthetic method.
利用原位反应合成法制备金属基复合材料，在同等条件下，其力学性能一般都高于强制法制备的复合材料。
The Metal Matrix composites, prepared by in-situ reaction composite technology, can normally achieve higher mechanical properties than other traditionally prepared composites under the same condition.
原位合成的复合材料具有优良的性能。
Materials prepared by in situ synthesis have fine performance.
用原位合成法制备了纳米颗粒增强铝基复合材料，研究了复合材料微观组织、室温拉伸强度、塑性，并与基体合金进行比较。
Microstructure, plasticity and mechanical properties at room temperature of the nano particle reinforcement aluminum matrix composites fabricated by in situ reaction and matrix alloy were studied.
用本发明制备的复合材料质轻、易合成、价格低、环境友好、可见光透过率高。
The composite material produced by the preparation method of the invention has the advantages of light weight, easy synthesis, low price, good environmental protection and high light transmissivity.
在分析硅胶表面结构的基础上，讨论了硅胶聚胺复合材料的各种合成方法。
The synthetic methods of the polyamine-silica composite materials are reviewed on the basis of the surface structure of silica gel.
我们合成了多种聚合酸，探讨了影响聚合酸-玻璃粉复合材料性能的因素，评价了该材料的透x线性和耐水性。
We have prepared many different polyacids, studied factors affecting the properties of these materials, and evaluated the property of water resistance and X-ray penetration of these materials.
以合成的木质素基环氧树脂为基体，蒙脱土为增强材料，采用插层复合法制备了酶解木质素基复合材料。
Based on the resin with the montmorillonite as reinforcing material, the lignin-based composite material was acquired by the intercalation compounding method.
举例说明了纳米复合材料对鞣剂、加脂剂、涂饰剂等皮革化学品的改性作用及其在合成革领域的应用。
The application of nano-composited materials in leather chemicals such as tanning agent, fatliquor, finishing agent and synthetic leather are illustrated.
研究了三维中空复合材料的复合成型工艺，重点介绍了真空辅助成型工艺。
In this paper, investigation on molding process of the 3-d sandwich woven composite, emphases introducing the VARIM molding processes. the experimental samples were made.
其中外壳是合成树脂与玻璃纤维或玻璃布的复合材料，具有轻质、高强、耐腐的优良性能。
The outer layer is made of synthesized resin and glass fiber or fabric and is light in wt.
全球聚合物奈米复合材料市场，预测到2019年前将以超越24%的年复合成长率扩大。
Technavioa's market research analysts predict the global polymer nanocomposites market to grow at a CAGR of more than 24% until 2019.
介绍了新型高tc超导颗粒(YBaCuO系)与铁磁流体的复合材料的合成和结构。
Structure and synthesis of new composites of ferrofluids with high-Tc superconducting particles of the YBaCuO system is described.
利用插层聚合合成了环氧丙烯酸酯/蒙脱土复合光固化树脂，并采用紫外光固化制备了环氧丙烯酸酯/蒙脱土纳米复合材料。
The ultraviolet-cured epoxy-acrylate/montmorillonite(EA/MMT) hybrid was synthesized by intercalation polymerization, and prepared into a novel nanocomposite material via UV-curing process.
利用插层聚合合成了环氧丙烯酸酯/蒙脱土复合光固化树脂，并采用紫外光固化制备了环氧丙烯酸酯/蒙脱土纳米复合材料。
The ultraviolet-cured epoxy-acrylate/montmorillonite(EA/MMT) hybrid was synthesized by intercalation polymerization, and prepared into a novel nanocomposite material via UV-curing process.
应用推荐