本文选题自东北大学液压试验台的设计制造项目。
The thesis is from a project of Northeastern University, the design and production of hydraulic experimental bench.
详细地介绍了空气静压径向轴承试验台的设计过程。
This paper introduces a design process of a testing stand for aerostatic journal bearings.
介绍了点火线圈测试台的设计原理、结构及各项测试功能。
This paper introduces the designing principle, structure and function of the ignition coil tester.
本文着重从焊接夹具方面对侧围总成装焊拼台的设计作介绍。
This paper introduces the design of the bench of the assembling and welding of the lateral assembly with focus on welding jig.
本文介绍了“积木式”的中庭建筑火灾模型实验台的设计和制作。
This paper introduced the designing and manufacturing of building block form experimental model for atrium buildings fire.
实验台的设计是完全模拟火电厂空冷散热器并通过具体计算进行的。
This design for the air cooled experimental platform completely simulates air cooled heat exchangers in power plant by concrete calculation.
本文对悬浮速度的测定原理，试验台的设计和制作都作了探讨和分析。
In this paper author discuss that determine philosophy of in suspension speed and design of the test-bed.
介绍了一种装载机液力机械传动变速器总成检测试验台的设计思路与具体方案。
Design concept and concrete scheme of a test bench for hydro-mechanical transmission assembly on loaders are depicted in the article.
结合一个液压试验台的设计实例，介绍了PLC控制器的触点的合理配置问题。
Rational contact configuration of PLC in hydraulic test platform design is introduced in this paper with an example.
本文论述了一种伺服阀维修试验台的设计。该设计特别适合伺服阀用户的使用。
This paper describes design of a test stand for repairing servo valve which is specially suitable for servo valve user.
为此，我们提出了建立空冷实验室的设想，并已完成空冷实验台的设计和计算。
Therefore, the plan is presented that an air cooled laboratory is setup and has been carried out the design and calculation.
提出了一种新型升降台的设计型谱，从理论上探讨了其结构特性、力学特性等。
This article puts forward and illustration of a new type knee, it also discusses its structure characteristics and mechanical properties in theory.
首先是对称重系统硬件模块的设计，包括称重秤台的设计以及称重电路的设计。
First, the design of hardware consists of the design of platform scale and the design of integrated circuit, and printing circuit board.
介绍了自行研制的小型旋臂水池试验台的设计思想、结构形式及其主要技术问题。
A new type of small rotating arm basin tester, including its design theory, structure and main technical matters, is introduced in this paper.
详细介绍了涡流管实验台的设计和搭建过程，实验台包括供气系统和主机两个部分。
The process of designing and building of vortex tube experimental system is introduced in detail. The experimental system includes air feed system and mainframe.
本文介绍了航空阀门微机试验台的设计，并以实例说明了航空阀门的微机测试方法。
The design of test device of air valves was introduced. Some examples of test method with microcomputer was also given.
针对箭载数字量变换器性能参数要求，开展了其相应测试设备即测试台的设计与研究。
According to the requirements of rocket digital convertors performance, the testing device has been designed and studied.
论文提出的双柱联合浅基础和双柱联合桩基承台的设计计算方法可供工程设计人员参考。
Designers may refer to the design-calculation methods which are suggested in this thesis in terms of double-column combined shallow foundation and double-column combined pile caps.
文章详细阐述了低速翼型升阻特性实验台的设计过程，分析了自制翼型的风洞实验结果。
The design process of the test-bed of the low speed airfoil lift-drag force characteristic was introduced, and the experimental results of the airfoil were analyzed.
本文主要介绍了“带有可控硅的反馈试验线路”，在此基础上，开展了整个试验台的设计。
In this paper, "with SCR feedback test line," On this basis, for the whole test-bed design.
本论文结合课题需要，对实验台的设计和测试技术进行研究，以便为下一步工作打好基础。
The paper combines with the issue needs and proceeds research for technology of designing and testing in order to lay foundation for the next step.
结合生产维护实践总结了该振动台的特点，为连铸机振动台的设计、改造、维护提供了参考。
The characteristics of the unit with maintenances practice are summarized. The references of design and innovation as well as the maintenance suggestion are provided.
本文应用相似理论，研究论述了竖井冻结过程和掘砌过程的模化原理，及模拟试验台的设计和试验。
Based on the similitude theory the paper discusses the modelling principle of shaft freezing and sinking. Also, the design of the model test rig is described.
本文选题自东北大学液压试验台的设计制造项目。完成了从硬件设计到软件开发一整套的设计任务。
The paper is from a project of, the design and production of hydraulic experimental bench for Northeastern University, and the whole task of hardware design and software design have been finished.
本文提出了测定物料悬浮速度气吸式试验台的设计和总体结构，并论述了原理。经测定得到了较满意的结果。
This article presents and deals with the design, principle and structure of experimental device of suctorial type used for determining the suspension speed of agricultural material.
鸟瞰台的设计元素是由一个内部钢桁架系统组成，元素的表皮是用木头建造，而木头的纹理和颜色都与其所处的景观有关。
The element is composed of an internal steel truss system and the skin of the element is built with wood which locates the intervention within the chromatic palette and texture of the landscape.
系统地阐述了钻井泵泵阀试验台的设计指导思想和设计方案的确定依据，并介绍了试验台系统压力的调节方法和计算公式。
The guide rule and general plan to design a laboratorial test stand for drill pump valves are expounded, and the regulation and calculation of the system pressure of the stand are discussed.
将有限元模态分析值和实验测试结果相比较，探讨影响微动工作台动态性能的综合因素，为微动台的设计提供理论和实验依据。
The simulated results were compared with the corresponding experimental ones in order to analyze the factors influencing the dynamic properties, and it provides...
将有限元模态分析值和实验测试结果相比较，探讨影响微动工作台动态性能的综合因素，为微动台的设计提供理论和实验依据。
The simulated results were compared with the corresponding experimental ones in order to analyze the factors influencing the dynamic properties, and it provides...
应用推荐