实现了捷达、来和高尔夫轿车发动机曲轴毛坯的国产化。
The nationalization of engine crankshaft blank for jetta bora and golf car was realized.
本文提出了汽车发动机曲轴多工况可靠性优化设计方法。
A fatigue reliability optimum design method for automotive engine crankshaft under various operation modes is presented.
实现了捷达、宝来和高尔夫轿车发动机曲轴毛坯的国产化。
The nationalization of engine crankshaft blank for Jetta, Bora and Golf car was realized.
对应用热喷涂技术修复进口发动机曲轴的效果进行了总结。
This article summarizes the application of engine crankshaft restored by thermal spray.
发动机曲轴圆角采用深滚压工艺可大幅提高曲轴疲劳强度。
Applying the deep rolling depression technology to engine crankshaft fillets can greatly improve their fatigue strength.
飞轮用螺栓直接连接到发动机曲轴上，随曲轴旋转而旋转。
The flywheel is bolted directly to the engine crankshaft and rotates when the crankshaft turns. The pressure plate is bolted to the flywheel.
之后发动机曲轴转动起来，不需离合器和变速器输人轴的转动。
The engine crankshaft can then turn without turning the clutchdisc and the transmission input shaft.
飞轮安装在发动机曲轴上，它将发动机的扭矩传递给离合器总成。
The flywheel mounts to the engine's crankshaft and transmits engine torque to the clutch assembly .
它在摩托车发动机曲轴连杆组件的连接中具有极大的实用价值。
The utility model has practicability in the connection of the crank connecting rod component of the motorcycle engine.
在自动变速器中，发动机曲轴和车轮问不同的传动比是自动调节的。
In automatic transmissions, the varying ratios between the engine crankshaft and the wheels are achieved by automatic means.
汽车发动机曲轴是汽车动力装置的核心零件之一，其制造质量要求很高。
The motor car engine crank is one of automobile power unit core components, Its manufacture quality requirement is very high.
以进口某型航空活塞发动机曲轴配重为对象，对其曲轴配重修理进行研究。
The counterweight of an aerial piston engine made in American is object of repair technology research in this paper.
当大电流流过汽车启动机的线圈时，可以产生足以让发动机曲轴转动的力矩。
An automotive starter motor has many conductors and USES a lot of current to create enough rotational force to crank the engine.
本文的研究对象，是一台由四气缸母型机变形后的三气缸发动机曲轴圆角设计。
In this paper, we will study a three-cylinder engine which is reformed from a four-cylinder prototype engine.
接着启动机将这部分电能转化成机械能，通过驱动机构传到发动机曲轴飞轮上。
The starter motor then converts this energy into mechanical energy, which it transmits through the drive mechanism to the engine's fly wheel.
主要介绍在加工发动机曲轴斜油孔时，用解析法计算曲轴装夹时所倾斜的角度。
This article introduces mainly calculation of a slanting Angle of crankshaft clamping with the analysis method in machining crankshaft oblique oil hole.
介绍了摩托车发动机曲轴锻造生产线设计、设备选型以及对工艺、模具设计研究。
This paper introduces a design procedure about production line of crankshaft forging on engine of motorcycle.
为解决高转速下动力与经济性能的下降，提出一种新的气动发动机曲轴连杆机构。
To solve the poor economic and dynamic performance at high engine speed, a new crank shaft mechanism of air powered engine was proposed.
水泵由发动机曲轴上的皮带驱动，使冷却液在散热器与发动机水套之间循环流动。
The water pump, driven by a belt from the engine crankshaft, circulates the cooling liquid between the radiator and engine water jackets.
水泵由发动机曲轴上的皮带驱动，使冷却液在散热器与发动机水套之间循环流动。
A cooling device, as in automotive engines, through which water or other fluids circulate as a coolant.
往复活塞式发动机曲轴扭振吸振器是应用得最早且最普通的一类阻尼式动力吸振器。
The torsional vibration absorbers of reciprocating piston engine crankshafts are the earliest and most commonly used kind of damped dynamic vibration absorbers.
本文简要介绍了汽车发动机曲轴常见的失效形式，分析了各种失效形式可能的原因。
The main failure forms of the automobile engine crankshafts were presented and their possible causes were analyzed.
其主要功能是减少轴瓦与曲轴间的滑动摩擦磨损，提高发动机曲轴及连杆的使用寿命。
Its primary functions are to reduce wear and tear between bearing and shaft, and raise longevity of shaft and connection rod.
介绍了一种基于微机环境的车用发动机曲轴CAD/CAM集成系统的总体方案设计。
The general plan of Crankshaft CAD/CAM system based on the microcomputer is introduced.
介绍了并联逆变式IGBT变频电源的工作原理及在汽车发动机曲轴淬火上的应用情况。
The working principle of the parallel contravariant IGBT variable frequency power supply and its application in the quenching process of engine crankshafts are introduced.
介绍了国内发动机曲轴毛坯生产的几种方法，比较了各自的特点，指出了各自的应用范围。
This paper introduces many production methods for engine crankshaft models, comparing their respective characteristics and specifying their application areas.
发动机轴系包括发动机曲轴以及与之相连的各运动部件组成的总成，是典型的弹性轴系统。
The engine shaft system is a typical flexible shaft system, which includes crankshaft and other relevant moving parts.
广泛用于汽油发动机曲轴，柴油发动机曲轴，变速箱，差速器，减震器，发动机，车桥等部位。
Widely used in gasoline engine crankshaft, diesel engine crankshaft, transmission, differentials, shock absorbers, engines, axles and other parts.
对精铸生产发动机曲轴平衡块的工艺设计进行了分析，设计出了批量生产行之有效的工艺方案。
Process design for crankshaft balance piece of engine by investment casting is analyzed. The practical process scheme of batchs of production has been made.
例如，将变速器装配到离合器壳上时，必须使变速器输入轴的中心线与发动机曲轴的中心线对准。
For example, using the gearbox fitted to the shell, the need for gearbox input shaft axis lines at the engine crank axis lines.
应用推荐