最后本文对试验进程、加载模拟方法、试验规模、试验设备、试验的风险因素等进行了说明。
At last, thesis explains the test process, simulation method of loading and measure, test equipment, test risk and so on.
梁段、柱段变形引起的梁外端挠度可利用已有悬臂柱低周交变加载模拟程序计算,再通过几何关系换算得到。
The beam end displacement due to beam and column deformation may be calculated by existing cantilever program and then converted by geometric relation.
结果:加载模拟咬合压力的人牙周膜成纤维细胞COX 2表达水平明显高于对照组,而且在一定范围内表达水平与加压力值成剂量依赖关系;
Res ults: COX-2 expression level in HPLFs loaded with intermittent simulated occlusion pressure was significantly higher than that in the controls in a magnitude-dependent manner.
在需要重新启动模拟时,可以加载一组合适的位置和速度。
Whenever it is necessary to restart the simulation run, an appropriate set of positions and velocities can be reloaded.
如果需要在Apache服务器(或其他Web服务器)上模拟一个加载,可以使用ApacheBench(包含在ApacheHTTPd标准发行版里)。
If you need to simulate a load on an Apache server (or any Web server), you can use Apache Bench, which is included in the standard Apache HTTPd distribution.
ApacheBench:在服务器上模拟一个加载。
但是,当您运行一个脚本时,内核不会将其看作是一个Linux二进制程序;它发现脚本附带有一个解释程序路径,当尝试加载解释程序时,它将不再运行于模拟模式之下。
But when you run a script, the kernel doesn't see this as a Linux binary; it sees a script with an interpreter path, and it's no longer running in emulation mode when it tries to load the interpreter.
这个快捷方式实际仅在命令提示符的模拟器中运行,不能在一个实际的虚拟设备中加载。
This shortcut would actually only run the emulator in Command Prompt and not load an actual virtual device.
下一步,您将初始化模拟器和团队通道,然后在启动过程中加载servlet。
In the next steps, you will initialize the simulator and the team channels, and then load the servlet during startup.
Android现在开始加载你的模拟器,几个命令提示符窗口会打开,然后你可以一览Android模拟器的“庐山真面目”。
Android will now begin to load in your emulator. Several command prompt Windows may open, and then you'll see the emulator itself.
负载控制加载器,模拟实际工况。也能通过变频器控制电机输出转速。
Loader was controlled with loading, and actual working state was simulated, the motor rev was controlled through transducer.
数据文件必须位于模拟Customer项目中,以便可以从类加载器中加载它们。
The data files must be located in the mock Customer project so that they can be picked up from the class loader.
液压装置完成称重轨的垂向调节,同时可模拟机车车体对转向架进行加载。
Hydraulics device is applied to controlling the weighting track and simulation the weight of locomotive body loaded on the bogie.
对该系统中气阀阀片的运动规律进行了模拟,对可调回流气阀的机构和加载力设计起了指导作用。
The simulation of the valve plate has been worked, and it can be used as the direction for the design of SCCS and the unloader force.
在模拟过程中涉及几何非线性、材料非线性、状态非线性和动态加载等问题。
Geometry nonlinear and material nonlinear and state nonlinear and dynamic load are involved in simulate course.
在模拟过程中涉及几何非线性、材料非线性、状态非线性和动态加载等问题。
Geometry nonlinear and material nonlinear and state nonlinear and dynamic load were involved in simulating course.
试验表明这些加载方式可以较准确地模拟车辆在实际道路上行驶时所承受的载荷,从而评价驱动桥的综合性能。
Tests show that the loading scheme can rather accurately simulate the actual loads exerting on a vehicle and hence can relatively exactly evaluate the comprehensive performance of drive axle.
为了提高电涡流测功器加载的动、静态性能,采用自适应控制来改变电涡流测功器的励磁电流,从而可以精确模拟实际工况加载。
In order to improve its dynamic and static performance of loading, adaptive control is used to change its exciting current for achieving accurate simulation of the actual working load.
采用PLC控制变频器来改变电力测功机励磁电流的大小,来达到改变模拟加载阻力的要求。
PLC was used to control the transducer, change current of the dynamometer, so that it can change simulated load resistance.
模拟通过加载氢离子圆盘和充入中性氢气,观察了引入离子后电子束和离子的行为。
Hydrogen ion lens are loaded and neutral hydric gas is filled in simulation in order to observe the interactional behavior of electrons and ions.
通过对卷取机助卷辊的AJC动作及控制的分析,设计出了AJC控制系统,并对其进行了建模及仿真分析、模拟加载验证。
By analyzing wrapper roll's AJC action and control, the AJC system is designed and its mathematic modeling, emulation analysis and analogue loading verification are conducted.
本文提出了借助于电子计算机,用列车编组单对影响线加载来模拟铁路桥梁疲劳应力谱的方法。
With the aid of a computer, a method used to simulate the fatigue stress spectra of railway Bridges by loading the influence lines with the train marshalling list is presented in this paper.
针对越野汽车车桥模拟加载试验系统,分析了机械耦合对系统控制性能的影响。
The influence of mechanical coupling on control property is analyzed in the secondary regulation load simulation test equipment for the drive axle of the cross motorcar.
在有限元模拟中,为了贴切实际加工过程,引进生死单元算法来模拟材料去除过程,通过动态施加载荷步来模拟刀具的运动。
In the course of FEM simulation, the birth-death element arithmetic was introduced into simulating material remove, and the kinetic Load-step was used to simulated tools work.
计算机模拟给出了试件的载荷-加载步曲线和混凝土试件的破坏过程的应力分布图。
The load -step curve and the stress distribution figures during the deformation and failure process of the concrete specimen were presented.
文中简要介绍了焊接过程数值模拟热源的各种加载模式:高斯分布函数、双椭球分布函数、生死单元方法。
The paper briefly introduces several heat source models in numerical simulation of welding processes, including Gaussian distribution, double-ellipsoid distribution and birth-death element.
模拟最大咬合力600N垂直加载于全瓷冠模型咬合面。
A loading of 600 n, simulating the maximum bite force was applied vertically to the crowns.
模拟最大咬合力600N垂直加载于全瓷冠模型咬合面。
A loading of 600 n, simulating the maximum bite force was applied vertically to the crowns.
应用推荐