研究了切削速度和进给量对加工表面粗糙度的影响。
The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.
精确合理的铣削过程模型是研究铣削加工表面形貌的关键。
Precisely and reasonably modeling for milling process is the key to study milled surface topography.
首先，总结归纳了机械加工表面评定中广泛采用的两类方法。
First, the two most common used methods adopted in machined surface assessment are summarized.
已加工表面存在的残余应力影响工件的使用性能和疲劳强度。
The residual stresses impacts the working performance and fatigue strength of parts.
通过铣削实验和对加工表面的测量，验证了上述模型的正确性。
The models mentioned above are verified by means of milling tests and measurements of milled surfaces.
本文还研究了玻璃切削刀具特征参数对已加工表面粗糙度的影响。
In addition, the influences of characteristic parameters of tools for glass cutting on machined surface roughness are presented in this paper.
纤维增强复合材料的切削加工表面结构和粗糙度与切削方向密切相关。
The machined surface texture and roughness of composites reinforced by fiber are closely related to the cutting direction.
可根据材料的特性及技术要求，通过改变工艺参数得到理想的加工表面。
Process parameters were found to obtain optimum effect of surface hardening, according to material property and technology requirement.
残余应力分布状态及表面租糙度是评定加工表面层质量的两个重要参数。
Residual stress profile state and surface roughness are the two important parameters for evaluating machined surface layer quality.
从不重磨车刀的使用寿命、加工表面粗糙度等方面，来展开试验分析研究。
From the wear resistance of non-regrind cutters and the roughness of processed surfaces, some tests and analysis are done.
利用扫描电镜观察、比较碳化硼陶瓷加工表面弹性性能及加工表面变质层。
Using scanning electron microscope observation comparison carbonization boride cermet processing surface elastic performance and processing surface deterioration level.
本文报道了肋形隧道机械加工表面多孔管(JK—2管)单管管外池沸腾实验。
The present paper reports pool boiling experiments of the mechanically made porous surface tubes with ribbed tunnels (JK-2 tube).
文中研究了PCD刀具在不同的刀具几何参数下车削铝合金的加工表面粗糙度。
This paper presents a study of cutting surface roughness for different PCD tools having various tool geometries during machining Aluminum alloy.
长期停止使用时，应拆开水泵，将零件上的水擦干，在加工表面涂上防锈油保管好。
In a long time stop, remove the pump and dry the parts and coat rust-proof grease on the processed surface.
机械加工表面形貌表征和评价一直都是表面计量学和摩擦学领域最重要的课题之一。
Characterization and evaluation of machined surface topography has always being one of the most vital and appealing issues in the area of surface metrology and tribology.
介绍了一种采用计算机控制激光位移传感器在线检测木材机械加工表面粗糙度的新方法。
This paper investigated the possibility of measuring the surface roughness of wood by the laser displacement sensor of the computer control.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
混粉电火花镜面加工不但能改善加工表面粗糙度，且能提高加工表面的耐磨性和耐蚀性。
The powder mixed dielectric mirror EDM not only can improve the machined surface roughness but also the abradability and corrosion stability.
在机械工程中，对机械零件加工表面的这种凹凸不平性开展研究同样具有重要的实践意义。
In Mechanical Engineering, conducting research on the roughness of surfaces of the machine element also is profoundly practically significant.
提出以刀具类型和被加工表面的几何信息为输入，通过解析求解机床运动方案的设计方法。
This paper suggests a design method with information of the machined surface as the input and motion schemes of machine tools obtained through analysis.
文章分析了超声振动车削时工件的装夹偏心和车床主轴的旋转精度对加工表面粗糙度的影响。
This paper analyses the influence of the eccentric clamp of the workpiece and the rotative accuracy of the lathe spindle on the ultrasonic lathe.
锯条的侧向位移在很大程度上决定了加工表面的质量，侧向位移过大工件表面质量得不到保证。
The quality of the workpiece surface is subject to the side displacement of the saw blade to some large extent.
采用压痕损伤理论研究和分析高性能陶瓷材料的磨削加工过程及其对加工表面和零件性能的影响。
The grinding processes of advanced ceramic material are studied by using indentation damage theory, and their influence on the finished surface and component properties is discussed.
根据试验结果研究了在木材纤维平面中过渡切削时切削力和加工表面木材纤维倾斜角之间的关系。
Based on the experiment, the relations between cutting forces and oblique angles of wood fibre during the transitional cut on plane of wood fibre were studied.
如果刀具参数选取得当，能在常规切削用量下获得在玻璃的塑性域内形成的、无微裂纹的加工表面。
Crack-free surface that is formed in ductile regime of glass can be obtained under conventional cutting conditions if the tool parameters are chosen properly.
通过对机械加工表面轮廓特征的分析，说明了在表面轮廓参数测量中，消除各种误差影响的必要性。
Based on the analysis of the characteristic of machined surface profile, the necessity to eliminate errors' influence on the measurement of surface profile parameters was explained.
通过对机械加工表面轮廓特征的分析，说明了在表面轮廓参数测量中，消除各种误差影响的必要性。
Based on the analysis of the characteristic of machined surface profile, the necessity to eliminate errors' influence on the measurement of surface profile parameters was explained.
应用推荐