目的：研究清胆颗粒制粒工艺。
OBJECTIVE: To study the preparation technology of Qingdan granule.
目的研究附片颗粒剂的喷雾干燥制粒工艺。
Objective To study the technology of spray-drying process in preparation of Fupian Granules.
巴马克砂与球磨砂是制粒工艺不同的棕刚玉砂。
Barmac grains and ball milling grains are brown corundum grains from different granulating process.
目的：改进牛磺酸颗粒的制粒工艺，提高收率。
Objective: To obtain a higher yield by improving the preparative technology of taurine granule.
以颗粒粒径分布、流动性及成品率为评价指标，优选清胆颗粒制粒工艺。
And the preparation technology was optimized by taking grain size distribution, grain fluidity, the ratio of finished product as evaluation index.
提出了在以往设计中对设备选型的体会，希望本文对固体制剂在制粒工艺选择方面有所帮助。
The experience to equipments choice in designing was put forward, hope supply help in technology choice of solid preparation and granulating.
用均匀设计法设计试验，对高速搅拌制粒工艺进行定量化控制，制备了阿司匹林控释骨架片。
Aspirin controlled release matrix tablets were prepared using quantitative controlling method of high speed stirring granulation technology.
本制粒工艺亦可推广到其它用细粉未（如钨、钼、钛、锆等）制取粉末冶金多孔过滤材料的生产中。
This granulation process can also be widely used for producing P/M porous materials by using other fine powders, such as w, Mo, Ti, Zr, etc.
结论：粉末直接压片工艺制得的分散片不仅溶出较湿法制粒更快，而且省去了湿法制粒工艺过程的烦琐操作。
Conclusion: the results indicate that not only the dissolution rate is faster, but also the procedure is easier than the wet granulation technique.
最后，对提取液的浓缩、干燥、制粒工艺进行优选，制定出最佳工艺参数，为合理规范的工业化的大生产提供依据。
Last, optimizing the best parameter of condense, dry and granulate to offer the reasonable, normative and scientific data for industrialized production.
结果：按优化后的新工艺制粒，制粒收率达到92.4%。
Result: the yield obtained by the improved technology was 92.4%.
结果优化制粒的工艺条件，确定一步制粒的最佳工艺参数，从而提高颗粒的成品率。
RESULTS Obtained the optimization of one-step pelletization technology and the technical parameters, to improve the ratio of finished product.
本文对挤压机的结构及工作原理，挤压膨化后料粒结构的变化及其对制油工艺的影响等进行了评述。
In this paper, the structure and work principle of extruder, the changes of extruded pellets and the influence of extrusion on oil extraction are discussed.
目的研究以湿法混合制粒法制备碳酸氢钠片的工艺。
OBJECTIVE The technology of manufacture of sodium bicarbonate tablets by wet mixing granulation was investigated.
针对东烧以利用自产浮选精矿为主，进行生产酸性小球团热烧结矿的改造，进行了小球团烧结工艺的制粒研究。
Point at the Dong Anshan sinter plant will modifying sintering production to acid MPS hot sinter with self- mined flotation concentrates, the granulating research of MPS process was conducted.
制备工艺中采用喷雾干燥及干式制粒的方法，使有效成分完全保留，便于连续性GMP条件下大型生产。
During the preparation, spray drying and drying granulation process is adopted to maintain the effective components as far as possible and for continuous GMP production.
方法以口味、制粒好坏及可压性为考察指标，优选出片剂最佳生产工艺。
Methods Taking taste, effect of making granules and against moisture as criteria, this paper studies the optimum technology of compound licorice buccal tablets.
当今应用高速搅拌制粒机进行湿法制粒最多，应用工艺分析技术和制粒的统计工具是未来的发展趋势。
A high-shear mixer is mostly used for the wet-granulation. Applied Process Analytical Technology(PAT) and statistical tools of granulation are dominating the kingdom of wet-granulation.
所述的增强型低温热塑材料的制备工艺，包括造粒、制板、打孔、交联等步骤。
The preparation process of the enhanced low-temperature thermoplastic material comprises the following steps: granulating, plate making, perforating, cross-linking, and the like.
方法：运用喷雾干燥制粒技术进行工艺制备，运用薄层色谱法进行质量控制。
Methods:Jiawei Baohe Granules were prepared by spraying-drying method and qualitatively identified by thin-layer chromatography(TLC).
原矿加盐焙烧水浸或酸浸；原矿加盐焙烧一拌酸制粒熟化酸浸等工艺过程。
The technological processes of raw ore direct acid-leaching, raw ore salt roasting-water leching or acid leaching and raw ore salt roasting-acid pelletizing curing-acid leaching, etc.
原矿加盐焙烧水浸或酸浸；原矿加盐焙烧一拌酸制粒熟化酸浸等工艺过程。
The technological processes of raw ore direct acid-leaching, raw ore salt roasting-water leching or acid leaching and raw ore salt roasting-acid pelletizing curing-acid leaching, etc.
应用推荐