介绍了AGFACR系统在运行过程中出现的各种故障现象，及其分析与维修方法。
Describes some common malfunctions in the operation of AGFA cr system, puts forward the methods to analyze and solve them.
利用TURBO -PROLOG语言建立了一个电焊机故障计算机辅助分析与维修系统。
A analysis and repair computer aided system for welding machine breakdown is set up by using TURBO-PROLOG language.
介绍了在维修万东f 108 - V遥控透视X射线机的过程中遇到的一些典型故障及分析与维修过程。
Describes the typical troubleshooting in the maintenance of WANDONG F108-V remote control perspective X-ray machine, analyzes the causes and puts forwards the measures.
维修费的统计与分析为开展仪器设备预防性维护保养提供可靠数据，以便提高设备的使用率，同时为医院节省维修费用。
To improve the utilization of the equipment and save maintenance costs for the hospital, the statistics and analysis of maintenance costs provide reliable data to carry out the preventive maintenance.
对机组运行中的振动情况进行实时的监视、测量与分析，是减少机组事故、提高维修效率的有效途径。
So, an effective approach to reducing accidents and raising maintenance efficiency is to implement real-time monitoring, measurement and analysis of vibration of operating units.
此类分析对于桥梁养护与维修、长期健康监测具有重要的意义。
This kind of analysis can serve for the long-term health monitoring, maintenance and rehabilitation and it has great importance.
对圆锥破碎机偏心部件磨损情况作了详细分析，提出了改进偏心部件的设计、使用与维修的办法。
The wear of the eccentric parts of cone crusher was analyzed in detail, and the ways to improve the design, the use and the maintenance of the eccentric parts were also proposed.
通过对L波段雷达的使用与维护，将其中的一些故障个例提取出来进行分析，从中探索L波段雷达维修方法。
This paper analyzes some breakdown examples through daily use and maintenance for the L wave band radar, and explores the overhauling methods for the L wave band radar.
本文从养护与维修角度，分析了砼路面接缝破坏及砼板本身破坏的主要形式及成因机理。
From the aspect of conservation and maintaining, this paper analyses the main form and causation of joint and concrete board damage in concrete road.
对投影机亮度变暗的原因与维修、维护的范围及效果进行了分析，提出了维护、维修的方案及成本预测。
This article analyses the causes of making projector's luminosity darkling and introduces their maintenance ranges and effect and brings forward their schemes of maintenance and their cost.
通过对发动机曲轴轴颈与轴承损坏原因的分析，重点阐述了发动机在使用与维修中预防损坏的措施和方法。
By analyzing reasons for break of engine crankshaft journal and bearing, this paper describes mainly some countermeasures they are break in use and maintenance.
文章介绍了MTS810．25T疲劳试验机的工作站与计算机的无法接通故障的情况、分析出现该故障的原因以及制定相应的维修方案。
The disconnection between computer and workstation of MTS810. 25T fatigue testing machine is described. Meanwhile, the breakdown reasons are analyzed and repair plan are set down.
从分析设备维修质量管理的特点入手，研究设备维修质量与产品质量的关系。
After the characteristic analysis of equipment maintenance quality management. This paper studies the relations between equipment maintenance quality and the product quality.
介绍了鸡西穆陵河大桥桥面破损原因的调查与成因分析，对维修方案做出了详细的技术经济分析。
The paper introduced the investigation and analysis on damage reasons of deck of Muling River Bridge, and compared two conceivable repair projects from the aspects of technology and economy in detail.
在对军用飞机维修保障过程分析的基础上，运用离散事件建模方法和计算机建模与仿真技术建立了飞机维修保障仿真模型。
An aviation maintenance model is established by using the discrete event modeling method and computer modeling and simulation technique after analyzing the military airplane maintenance process.
建立了CH-85FMS故障间隔时间的威布尔分布模型，通过对分布模型的分析，提出了基于可靠性制定预维修计划的理论与方法。
Weibull distribution fitting model of FMS fault interval was set up, and after relevant analysis, the theory and methods of establishing predicted maintenance scheme for the system were proposed.
本文主要讲述了数控机床常见电气故障的分类，遇到电气故障时的检查与分析方法，常见电气故障的维修与排除办法。
This article mainly deals with different types of electric faults of numerical lathes, as well as approaches to examine and analyze the faults and commonly used ways of maintenance and faults removal.
通过与管片式散热器总成的对比，分析、探讨了东风牌EQ140-1型汽车上所采用的管带式散热器总成的各项维修性能。
Based on a comparison with a tube and fin radiator, this paper discusses and analyses the repairability and maintainability of a tube and corrugated fin radiator installed on Dong Feng EQ140-1 truck.
同时，对重复性故障及重大故障进行了专题分析，就维修性与可靠性指标进行了确定与评估。
The monographic analysis has been focussed on the repeated failure and major failure. The reliability and maintainability index of the given engine have been evaluated.
基于排队论方法建立了车辆维修系统的数学模型，分析了系统的运行效率，确定了系统参数的最佳设置方法，并通过改变维修组数量与结构，提高维修服务作业效率。
Based on queuing theory, the mathematics model for vehicle maintenance system is presented and the operation efficiency of system is analyzed, then the optimal parameter for system is determined.
笔者从数控系统的构成与特点、故障分析与诊断及故障排除等方面论述了维修数控机床的方法。
The method of maintaining NC machine tools is discussed by the aspects of the structure and characteristics of the NC system, fault diagnosis and analysis, fault elimination and so on.
文章从理论和实践方面对注塑机液压系统故障诊断与维修技术进行了分析研究。
Fault diagnosis and maintenance technique for the hydraulic system of plastic-injection moulding machine are analytical from theory to practice in this paper.
通过误差分析，提供了一种精密级电阻的调整与维修方法。
Taking error analysis as a base, this paper presents a method for adjusting precise resistance.
针对ABC分类在设备维修备件管理中不足以区分重点备件的缺陷，将层次分析法与ABC分类相结合应用于设备维修备件的分类。
Because the most important spare parts can not be distinguished from ordinary spare parts only using ABC classification, a new method, ABC classification based on AHP, is provided in this paper.
介绍了《RELEX可靠性与维修性分析软件》在卫星电源系统研制中的应用。
This paper presented the application of 《RELEX Reliability & Maintainability Prediction and Analysis Software》in the development of the satellite power system.
研究信息融合技术在海底管道维修装置与检测装置间的应用，采用超低频电磁波，小波分析等技术与管线跟踪探测仪、DGPS以及示踪信号探测器等设备解决发射、接收、通讯技术中的关键技术点。
The extra low electromagnetic wave, wavelet technology, pipe track instrument, DGPS and tracing signal equipment are used to solve the key question of trans-mit-receive and communication.
分析了数控机床故障诊断技术研究现状，阐述了数控机床故障诊断的原则、故障识别的方法以及故障的诊断与维修技巧。
The technique present of mechanical fault diagnosis for numerically controlled machine tool was discussed, principle and methods of nc machine tool fault diagnosis were described.
对机床电气的故障诊断与维修做了理论与实际相结合的具体分析。
This paper is arranged to analyses the diagnose and maintenance of the breakdown towards the machine tool's electric breakdown in detail in the way of the combination of theory and practice.
本岗位直接向倒班监督进行汇报。协调现场维修技师、实验室分析员与现场承包商。
This position reports to Shift Supervisor. Coordinate with MFEM technicians, MFT lab, and contractors.
介绍了电阻焊质量监控方法之一的动态电阻法。详细分析了电阻焊机的使用与维修。
In this paper, one of the quality controls in resistance welding, the dynamic resistance method is introduced, and any problem of resistance electric welding machine in using are analyzed in detail.
应用推荐