剪刀面：面条被一把巨大的剪刀轮流剪成螺旋状。
Jian Daomian: Noodles are cut with an enormous pair of scissors as the giant spool shaped dough is rotated.
为了提高刀具耐用度，就必须减小后刀面边界磨损。
To improve a tool life in this case, therefore, the flank notch wear must be depressed to generate.
但是对铣削热的研究大多是对平前刀面铣刀片而进行的。
But most of them are limited in the flat rake face milling insert.
绵羊在剪刀面前是不声不响的，因此他们也不得开口说话。
Even as sheep before their shearers are dumb, so they were not permitted to open their mouths.
在试验研究基础上进行了有后刀面磨损的正交切削模型分析。
An orthogonal cutting force model with tool flank wear has been analyzed based on cutting test investigation.
年仅十五岁的她，为什么会在铡刀面前坚贞不屈、视死如归呢？
She was only fifteen years old, why would the guillotine before the unyielding, unafraid of death it?
受铣削温度分布的影响，前刀面磨损形态表现为较宽的月牙洼；
The wear form on the rake face is characterized as broad crater, which is directly influenced by the distribution of milling temperature.
第二章分析了刀具前刀面、后刀面和边界磨损等磨损表面的特征。
The second chapter analyzes the characters of rack face, flank face and boundary wearing.
后刀面热损伤层的定量分析，可以为确定最小刃磨余量提供理论支持。
The study of thermal damage layer for the major flank can provide theoretical guidances for determining the minimum machining allowance of edge grinding.
硬质合金刀具的氧化磨损主要发生在刀具前刀具和后刀面的磨损边缘区。
Oxidation wear appeared at the wear edge of rake face and flank face of cutting tool.
他拿起一把小刀，用刀面在自己脸上以一种巧妙的方式演奏了一支曲子。
He took up a knife, and with the flat part of it played a tune on his cheek in a wonderful manner.
前刀面热损伤层的定量分析，可以为随动磨削的加工余量提供理论依据。
The analysis of thermal damage layer for the rake face can provide theoretical guidances for confirming the machining allowance of surface grinding.
本文根据选定的枪钻设计参数，导出平面型后刀面枪钻钻尖的数学模型。
This paper describes the mathematical model derivation of gun drill point with planar flanks, for given sets of design parameters.
在切削油介质中，涂层铣刀后刀面磨损降低，切削性能也明显得到改善。
The TiAIN coating tools enhanced cutting performance obviously by reducing the flank wear in the cutting medium of coolant oil.
高质量：生产的刀具，刀面有很好的光洁度，刀型漂亮美观，经久耐用。
High quality: The Cutters has a very good smooth finish, beautiful shape, and durable which are produced by this equipment.
三种不同款式的刀均为符合TC规格的平滑刀面及软把手，并需附上图片。
Knifes, 3 different styles with smooth grinding and soft grip handle acc. to TC specification and attached pics.
根据刃形曲线的设计原理，提出了曲线刃钻头柱面后刀面的刃磨要求和刃磨过程。
Requirements and procedures were proposed for the regrinding of cylindrical flank of curved edge drills (CEDs) according to the principles guiding the design of curved edge shapes.
结合铣削温度试验，推导出了前刀面刀—屑接触面输入的热流密度的函数表达式。
Then, the mathematical expression of heat flow density on the tool-chip interface of the rake face is deduced on the basis of milling temperature experiment.
本文基于刀刃曲线方程，推导了球头等法前角前刀面的几何模型及其数控磨削模型。
Based on equation of cutting edges, new geometric model and NC grinding model of rake face of ball end mill with constant normal rake Angle are modeled.
马塞洛在上半场临近结束前获得了单刀面对克拉瓦的机会，但是他的射门高出了横梁。
Marcelo faced Kelava in a one-on-one close to half-time, but his shot went over the crossbar.
研究了锥面麻花钻后刀面的成型，建立了钻尖的数学模型，由此确定了后角的计算公式。
The forming of flank of conical twist drill was studied and mathematical model of twist drill tine was founded in order to get formula of back clearance.
本文主要研究PCD刀具加工有色金属时刃口及后刀面的刃磨质量对切削表面质量的影响。
The influences of flank surface and edge quality of PCD cutting tool on cutting surface quality when machining nonferrous metal are studied in this paper.
最大刀具等效应力出现在前刀面上切削刃的周围，工件上最大等效应力出现在第一变形区。
The maximum tool effective stress is located in the flank face near cutting edge and the shear deformation zone on the workpiece.
通过切削试验，研究了限制接触刀具前刀面的刀—屑接触长度逐渐减小时切削力的变化规律。
Through cutting experiments in which the contact length between chip and rake face of restricted contact cutter is reduced step by step, the variation principle of cutting force is studied.
介绍了以回转双曲面作为麻花钻后刀面的数学模型，研究了钻头设计参数与刃磨参数的关系。
Mathematical model for twist drill hyperboloid grinding is introduced. The relationship between drill design para meters and grinding parameters is studied.
通过对硬质合金刀具前刀面月牙洼磨损图像特征的分析，设计了检测磨损的算法，并开发了相关软件。
Through the analysis of image characteristic of crater wear in kentanium tool front face, arithmetic monitoring wear is designed, correlative software is exploited.
通过对硬质合金刀具前刀面月牙洼磨损图像特征的分析，设计了检测磨损的算法，并开发了相关软件。
Through the analysis of image characteristic of crater wear in kentanium tool front face, arithmetic monitoring wear is designed, correlative software is exploited.
应用推荐