文中涉及了蒸发器、冷凝器、冷凝蒸发器、中间换热器、毛细管和压缩机的设计计算。
The design calculations of evaporator, condenser, condensing-evaporator, medium heat transfer, capillary and compressor are described.
氨经冷凝器后流入蒸发器，在这里它在被水再次吸收之前提供制冷效果。
The ammonia circulates through a condenser and then an evaporator, where it provides the cooling, before being reabsorbed by the water.
蒸发器有助于冷却空气，冷凝器帮助准备冷却过程中的制冷剂，压缩机有助于制冷剂在它们之间移动来回。
The evaporator helps cool the air, the condenser helps ready the system's refrigerant for the cooling process, and the compressor helps move refrigerant back and forth between them.
蒸发器和冷凝器都是铜线圈，压缩机里也有一些铜。
The evaporator and the condenser are both copper coils, and there is some copper in the compressor, too.
除霜时机器处于蒸发器冷，冷凝器热的状态，室内室外风扇停止工作，压缩机运行。
Except when frost of the machine at evaporator cold, condenser hot state, indoor and outdoor fan to stop working, compressor operation.
对冷媒，冷冻油及蒸发器、冷凝器和配管的干燥处理是极为重要的。
The refrigerant, refrigeration oil and an evaporator, condenser and piping in the drying process is very important.
而蒸发器和冷凝器主要结构是由运载制冷剂的载体管材和在其上的铝散热翅片所构成。
The main structure of the evaporator and the condenser is the carrier pipe of the carrier refrigerant and the aluminum radiating fins on the carrier.
冷凝器是放出热量的设备，将蒸发器中吸收的热量连同压缩机输入功率转化的热量一起传递给冷却介质（如水或空气）带走。
The condenser is a heat equipment, the evaporator absorbs heat with heat input power of compressor transformation with the transfer of the cooling medium ( such as water or air ).
它由压缩机、冷凝器、蒸发器、制冷剂流量控制阀和或恒温膨胀阀五个基本配件组成。
It consists of five basic parts, the compressor, the condenser, the evaporator, the receiver, and the refrigerant flow control valve or the thermostatic expansion valve.
由于冷凝器排出的热量包括冷媒从蒸发器吸取的热量以及由压缩功转换过来的热量。
Because the condenser heat includes a refrigerant from the evaporator absorbs heat and compression power conversion over heat.
化霜电磁阀安装在机台内，用于控制机台的冷凝压力，避免机台冷凝压力过低，造成蒸发器冰堵。
Thirdly, defrosting electromagnetic valve is arranged on the machine table, is used to control the machine condensing pressure, avoid machine low pressure evaporator condensate, causing ice jam.
结果是制冷剂在离开冷凝器时没有被完全液化，这减少了蒸发器中的冷却过程。
So the refrigerant will not be in a fully liquefied state as it exits the condenser, resulting in reduced cooling at the evaporator.
公司还拥有多项制冷核心技术，如螺旋蒸发器、板片蒸发器、U型蒸发器、V型冷凝器、工业空调机等。
Sanhe has many core technologies such as screw style evaporator, plate type evaporator, "U"shape evaporator, "V" shape condenser, industrial air conditioner and so on.
根据冷凝器中凝结液体量的变化调节蒸发器供液，由浮球操纵开闭的制冷剂流量控制阀。
According to the liquid condensed in the condenser changes the amount of conditioning evaporator for the liquid, the float control the opening and closing the refrigerant flow control valve.
吸收式制冷机主要由四个交换设备组成，即发生器、冷凝器、蒸发器和吸收器，外墙保温材料它们组成两个循环环路：制冷剂循环与吸收剂循环。
Absorption chiller mainly by the four exchange equipment composition, namely generator, condenser, evaporator and absorber, they formed two cycle loop: refrigerants circulation and absorber cycle.
它由压缩机、冷凝器、节流阀或膨胀阀、蒸发器，以及一种工作流体(冷冻剂)组成。
It consists of a compressor, a condenser, a throttle or expansion valve, an evaporator, and a working fluid (refrigerant).
这样，对发生器产生的单位质量蒸汽，会有更多的制冷剂分别在冷凝器和蒸发器中冷凝和蒸发。
Thus, more units are condensed and evaporated in condenser and evaporator respectively for one unit of refrigerant vapor generated from the generator.
模型由压缩机、壳管式冷凝器、膨胀阀以及满液式蒸发器等一系列部件模型组成。
The model consists of component models including the compressor, shell and tube condenser, expansion valve and flooded evaporator.
通过在蒸发器和冷凝器之间增设一组换热器，提高了单位功耗除湿率。
The dehumidification rate per unit energy consume was greatly increased by adding a heat changer between evaporator and condenser.
进行了发生器、冷凝器、蒸发器、吸收器、溶液热交换器等换热设备所需的传热面积计算。
The heat-transfer area demand of the heat-exchange equipments, such as generator, condenser, evaporator, absorber and solution heat exchanger, are computed.
模型由一系列部件模型组成，包括压缩机、经济器、膨胀阀、壳管式冷凝器以及满液式蒸发器。
The model includes sub models for key components, such as non economized compressor, economized compressor, economizer, expansion valve, shell and tube condenser, and flooded evaporator.
在所设计的新型平板式CPL系统中，蒸发器和冷凝器均采用带有毛细芯的平板式结构。
In the present CPL, both evaporator and condenser are designed as a type of flat plate with porous wick.
主要产品：1、YS冷凝器、冷风机、蒸发器系列风扇电机。
Main Products: 1, The fans electric motors of YS condenser, cold wind machine, evaporator.
通过分析说明，用对数平均温差法计算制冷冷凝器和蒸发器是不合理的。
The rationality of LMTD method applied in calculation of refrigeration condensers and evaporators is analyzed and proved to be unfit for the case.
该文介绍了海水蒸发器、预热器、终端冷凝器、海水箱等系统主要设备及海水淡化蒸发工艺流程。
The main parts of the system including the steam generator, the evaporator, the preheater, the final condenser, and the seawater tank are described in the paper.
公司主要生产YS冷凝器、冷风机、蒸发器系列风扇电机；
The company mainly produce the fans electric motors of YS condensers, cold wind machine, evaporator.
接通电源，点动启动压缩机，检查蒸发器及冷凝器风扇的旋转方向是否与箭头方向一致。
Switch on the power supply, power on the compressor, and examine whether the rotation direction of the fans of the evaporator and condenser agrees on that of the arrowhead.
该系统完成了对典型制冷装置的换热器部件，如板管式蒸发器、单脊翅片管式蒸发器、箱壁式冷凝器的参数化设计和绘图；
The system implements the parametric design and drawings of many typical kinds of refrigerating parts, e. x. the plate-tube evaporator, the single back-fin evaporator and the box condenser.
对于冷凝器和蒸发器，计算速度较分布参数模型均提高两个数量级。
For condensers and evaporators, the computational speed with the new model is about two orders of magnitude faster than that with the distributed-parameter model.
冷凝器、蒸发器等换热部件采用了换热效率较高的板式换热器。
We applied Panel heat Exchanger with higher heat exchange efficiency and smaller size in condenser and evaporator and other heat exchange parts.
应用推荐