本文中建议的体系结构的关键元素是信息模型和元数据。
The key elements of the architecture proposed in this article are an information model and metadata.
这个元模型（见图2）描述组件类型、接口和数据结构11。
This metamodel (Figure 2) describes component types, interfaces, and data structures 11.
元模型非常适应模型驱动的体系结构方法。
Metamodels fit well with the Model-Driven Architecture approach.
olap多维数据集具有一组特定的、类似但却更多限制性的、衍生自父多维数据集模型的元数据对象，这些对象包括多维数据集维、多维数据集层次结构、多维数据集层和一个多维数据集事实对象。
An OLAP cube has a specific set of similar but more restrictive metadata objects derived from the parent cube model, including cube dimensions, cube hierarchies, cube levels, and a cube facts object.
元模型(也称元-元数据)定义了元数据的结构和语义。
Metamodels (also known as meta-metadata) define the structure and semantics of metadata.
在量子光学、凝聚态物理、原子分子物理中存在许多典型的具有三生成元李代数结构的量子系统或模型。
There exist a number of typical systems and models which possess the three generator Lie algebraic structure in quantum optics, atomic and molecular physics and condensed matter physics.
采用实测轮胎荷载建立有限元模型，分析了满足长寿命路面要求的沥青路面结构组合。
Finite Element model was developed with actual tyre loads to analyze asphalt pavement structural combinations meeting the standards of perpetual pavement.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
本文研究了桅杆结构非线性有限元模型的建立方法。
In this dissertation, nonlinear finite element model establishment method of the guyed mast is studied.
建立发动机、发动机安装结构、机体一体化的有限元模型，可全面考察发动机安装结构动力优化设计的成效。
Upbuild the incorporate finite element model for the engine, engine install and aircraft stracture, May entirely seeing about the effect for dynamical optimize design of engine install stracture.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
使用这种模型对SYR200旋挖钻机桩架进行了整体有限元分析，分析对钻孔机桩架的结构设计有指导意义。
Complete finite element analysis is conducted on pile frame of SYR200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.
提出了软土二元结构随机渗流模型及其数值解法。
The random permeation model and the numerical answer of soft soil two-layer are established.
建立了既考虑发电机内部非线性又考虑外部电路拓扑结构的用于系统动态分析的时步有限元模型。
The time-stepping FEM model for the dynamic analysis of power system is established considering the nonlinear characteristics of internal generators and typology structures of external circuit.
介绍了神经元非模型控制的结构和基本原理及模糊控制器的设计的两种基本方法。
An introduction of the basic principles of the neuron model-free control and the basicdesign methods of the fuzzy controller is given.
采用梁、板线性有限元数学模型计算了结构自振特性和地震响应。
Structural free vibration characterization and seismic response were calculated by means of beam-plate linear mathematical model of finite element method.
用有限元数值模型，分析隧道断面上8个不同位置10种不同水压突水条件下衬砌结构的受力特征。
Mechanical behavior of lining structure is analyzed under 10 different conditions that high water pressure suddenly effluent water upon 8 different parts of tunnel section with FEM numerical model.
此外，还探讨了这种轮胎有限元分析模型在轮胎结构优选中的应用。
Moreover, the applicability of the model to the screening of tire structures is discussed.
结果表明本文采用的分析复合材料结构耐撞性能的模拟策略和方法及建立的有限元模型是合理可行的。
The results are compared well with the experimental data that in turn verifies the proposed numerical simulation strategy and method.
文章提出利于计算机表示的产品物元系统模型、产品软硬模型、产品结构模型。
Matter element system model of products, soft-hard model of products and structure model of products are given, which are propitious to representation in computer.
本文将理论、软件工具和实验有机结合起来，建立了合适、正确的这种特殊结构的有限元模型。
This paper integrated the theory, software with the experiment and established a reasonable, proper FEA model.
研究结果表明，三维声学边界元模型是抗性结构消声器声场分析的有效方法并具有较高精度。
The research shows that the three-dimensional acoustic boundary clement model is an efficient and highly accurate method of sound field analysis of reactive mufflers.
通过有限元模型和实际结构的曲率模态计算得到结构损伤因子，通过分析该损伤因子，可以判断实际结构的损伤位置。
Through comparing the curvature modes of real structure with finite element model, a damage factor was gained. Based on analyzing the damage factor, damage location can be identified.
首先建立发动机总成有限元模型，通过模态分析，为发动机的结构修改提供依据。
First establish finite element model of engine assembly, and provide evidence for the structure modification of engine through mode analysis.
本文建立了急救车车身结构的有限元计算模型，对车身结构的强度和刚度进行了计算，并对计算结果进行了分析。
In this paper the intensity and rigidity of the ambulance body structure are calculated by establishing the calculation model for its finite elements and then the results are analyzed.
建立了高压容器筒体与封头结构的有限元分析模型。
The finite element analysis model of cylinder and vessel head structures was established.
接口二次开发是目前结构有限元模型修正技术比较活跃的一个应用领域。
The connection quadric exploit is a quite active application domain of present structure computation model updating technology research.
本文简要介绍神经网络与神经计算机，神经元模型，层状网络结构，误差逆传播算法及其在地球物理反演中的应用。
This paper gave a brief review on neural nets and neural computers, neuron models, layered network structures, error back-propagation algorithm and its application to geophysical inversion.
因此采用大型有限元计算软件建立甲板局部结构模型，对系泊工况下甲板局部加强进行强度校核。
Therefore, we adopt finite element software to establish finite element model of local deck structure, calculate structure stresses and to check its strength.
本文利用有限元方法计算分析了锻压机架的结构应力，并用模型实验检验了有限元计算的正确性。
This paper analyzes the structural stress of a forge press by finite element method, and tests and verifies its correctness by the model experiment.
应用推荐