研究了活齿端面谐波齿轮各啮合副齿面修形的原则，得出了波发生器、活齿前后端和端面齿轮齿面的修形高度之间必须满足的关系。
The modification principle of tooth surface is deduced, and it draws the conclusion that the modificative tooth depth of wave producer, end face gear and oscillating teeth have certain relation.
修形直齿轮因误差因素在齿对的啮入和啮出位置会出现啮合干涉或啮合间隙。
Errors of modified spur gears results in meshing interference or meshing clearance at the position of mating teeth coming into or out of contact.
分析了标准和齿顶修形渐开线齿轮的轮齿本体温度和瞬时接触温度及相关因素对它们的影响。
Factors influencing the tooth bulk temperature and the surface transient contact temperature of involute gears with standard and modified tooth profiles are investigated.
用齿面接触分析法求解了存在制造误差时修形传动的齿面接触状态和运动精度。
The tooth contact and kinematic precision of the modified worm gearing with manufacturing errors has been investigated by the TCA method.
介绍了成形砂轮磨齿机的几种齿形修形方法及混合修形技术在工程上的应用。
In this article, the method and application of mixed flank modification in gear profile grinding machine are introduced.
在锥面砂轮型磨齿机上进行数控改造，对齿轮修形的CNC控制方法进行了研究和应用，并与传统的齿轮修形方法进行比较。
The gear grinding machine with conical wheel is retrofitted into CNC, the CNC controlled method for tooth profile relief is researched and applied, a comparison with traditional method is carried out.
滚刀、插齿刀设计成较大的修缘角，有利于提高啮合质量。
Designing of external gear shaper cutter with large tip relief Angle can improve the meshing quality.
描述了外啮合修缘插齿刀和修缘齿轮的齿形，分析了按常规设计修缘插齿刀存在的问题。
This paper describes the tooth forms of an external toothing and chamfering gear shaping cutter and chamfering gear shaper cutters designed by old routine.
该方法可以适用于各种类型的齿廓修形，并能有效保证修形加工的质量和精度。
The method is also applicable to tooth figure modification of various kinds and can effectively ensure the quality and precision of the modification machining.
讨论了渐开线修缘插齿刀设计中的具体问题，给出了插齿刀计算框图，并编制了CAD软件。
The design of chamfered gear shaper cutters is studied, and the designing frame is presented. The CAD software for calculating and drawing of gear shaper cutters is developed.
在动态分析的基础上建立了齿轮动态性能优化数学模型，以齿轮动态性能最优为目标，采用优化设计方法，确定最佳齿廓修形量和修形长度。
A mathematical model for the optimization of gear dynamic performance is developed and the optimum gear profile modification parameters are then determined by the optimal design approach.
齿面接触分析结果表明失配修形后接触质量良好。
The tooth contact analysis shows that good modification effect is achieved when the method of tooth mismatched modification is used.
提出齿廓修形曲线应满足的条件。
The conditions to be satisfied for profile modification curve are suggested.
把修缘角外插齿刀的设计归结为一个双目标的优化问题，建立了优化设计的数学模型。
This paper concludes the designing of the external tooth shaping cutter for tooth tip relief as a double-aimed optimization problem and proposes a mathematic model of optimum design.
静态计算结果表明，直齿锥齿轮齿廓长修形具有较好的减振效果。
The result of static calculation showed that the tooth profile long modification of spur bevel gear possesses better effects of vibration reduction.
因此本文对渐开线斜齿圆柱齿轮的修形方法及修形量进行进一步探讨。
So this article research on the involute helical gear modification method and modification of the amount.
推导出了活齿端面谐波齿轮各啮合副经过齿面修形后的齿面方程。
The equations of teeth surface after modification of all key components, such as wave producer, oscillating teeth, end face gear, are deduced.
因此，研究增速箱斜齿轮的动力学特性及齿廓修形技术对于提高风机运行的性能具有很大的意义。
Therefore, it is significant for improving the performance of wind turbine to study the dynamics of helical gear boxes and its gear profile modification technology.
双圆弧齿轮齿端修形是减小啮入冲击、降低传动噪声、避免齿端崩角、提高使用寿命的有效措施。
The tooth end relief is an effective process for double circular arc gear to lighten the shock, lower the meshing noise, and prevent the tooth end from breakage, so as to prolong the service life.
研究了螺旋锥齿轮齿面综合研磨率、动态互研与研齿修形机理。
The material general removal rate and the dynamic mechanism of tooth surfaces modified and corrected mutually during lapping process of hypoid gears were firstly investigated.
推导了进入双点啮合区的法面啮合角公式，采取了独特的剃齿刀修形方式，从设计和修形上下功夫杜绝剃齿中凹的产生。
And the normal engagement angle of approaching double-point tooth area is deduced. The special dressing method of shaving cutter has been adopted.
运用啮合理论，建立了剃齿刀修形解析模型，推导出了修形时的啮合方程及修形后剃齿刀的齿面方程，并进行了实例分析和计算机运算。
The mesh theory of the technique has been analyzed. The equation of mesh, equation of gear flank of shaving and profiling are obtained and the analysis of example is presented.
要求被磨剃齿刀在不多于两次的装夹后完成齿形的精确修磨。
It is required that accurate tooth coping be completed for the gear shaver within twice clamps.
直齿廓环面蜗杆或者二次包络环面杆蜗，均需进行修形加工。
It is necessary for both straight profile toroid worm and double enveloping toroid worm to be pruned on the faces of teeth.
传动部分是渐开线齿轮，工作部分可采用不同的工作面，如圆柱外圆面或圆弧形齿或渐开线齿轮齿顶修圆。
The transmission part is an involute gear, and the working part can adopt different working faces, such as a cylinder excircle face, a circular arc tooth or an involutes tooth gear top cavetto.
渐开线终止圆与齿顶圆（或者修缘线的起点所在的圆）共同限制了所要求控制的渐开线齿廓的范围。
This circle along with the tooth tip circle (or start of chamfer circle) determines the limits of tooth profile requiring control.
与气动球齿修磨机相比具有机械效率高，方便修磨，无排气污染、无排气噪声等优点。
Compared with a pneumatic ball tooth grinder, the electric ball tooth grinder has the advantages of high mechanical efficiency, convenient grinding, non exhaust pollution, non exhaust noise, etc.
在此基础上，采用先进的建模软件和分析技术对渐开线斜齿圆柱进行了修形方法的探讨和修形量的计算。
On this basis, using advantage modeling software and analysis repairing involute helical gear and methods of amount modification.
在此基础上，采用先进的建模软件和分析技术对渐开线斜齿圆柱进行了修形方法的探讨和修形量的计算。
On this basis, using advantage modeling software and analysis repairing involute helical gear and methods of amount modification.
应用推荐