介绍了一种利用核磁测井资料建立束缚水体积模型的新方法。
A new method for establishing bound water volume with NMR logging data is introduced.
分子相互作用体积模型在二元固态合金中的活度拟合效果优于正规溶液模型。
So the fitting effect of MIVM is better than that of the regular solution model in binary solid alloys.
水凝胶中扩散理论模型主要有自由体积模型、流体力学模型、位阻效应模型三大类；
The theoretical models consist of three categories: free volume, hydrodynamic, and obstruction effect models.
应用分子相互作用体积模型和正规溶液模型对37个二元固态合金体系的组元活度进行了拟合。
The molecular interaction volume model(MIVM) and the regular solution model have been applied to fit the activities of components in 37 binary solid alloys.
我们利用最小二乘法、体积模型、等级换算模型对数据进行处理，得出方法二比方法一的准确性略高。
The authors get the result that way 2 is better than way 1 by processing data, making use of least squares method, volume model and classification exchange model.
自由体积模型是玻璃化转变中应用最广泛的一个，液体玻璃态转变是分子自由体积微观变化的宏观表现；
Free volume model is one of the most widely used models in amorphous transformation , Hquid amorphous transformation is the macroscopic exhibition of molecular free volume microscopic changes.
在自由体积扩散理论的基础上，提出了渗透蒸发过程中二元水溶液在聚合物膜中扩散的修正自由体积模型。
A modified free - volume diffusion model for binary aqueous mixtures in pervaporation was developed on the basis of free -volume diffusion theory.
本文同时建立了材料去除形素体积模型的推理和评价系统并提出了从模型中识别材料去除形素体积的算法。
The dissertation also constructs the inference and evaluation system of the model of material removal volumes. The recognition algorithm of material removal volumes is advanced.
应用分子相互作用体积模型对二元和三元液态合金的组元活度进行预测及拟合，计算结果与实验数据吻合较好。
The Molecular Interaction Volume Model(MIVM) is introduced for the prediction and fitting of the activities of liquid alloys Ni-Mg-Cu, Ni-Al-Si and Ni-Cu-Co in the ternary systems.
当该模型与排除体积理论结合时，可同时获得实验临界压缩系数和博伊尔值。
When this model is combined with the theory of excluded volume experimental critical compressibility factor and boyle value are obtained together.
好我有我的小体积，不论有多少单独的体积元，那就是这个模型中可能状态的数目。
Well, I've got my little volume, and then however many individual cells there are, that's the number of available states in this model.
应用结果表明，该模型为在复杂的地层条件下求准地层束缚水体积提供了一种新的有效的方法。
Result of application indicates that a new effective method for determining bound water volume under complicated formation conditions is provided by the model.
该文从影响机理入手，分别建立了地化热解资料的样品重量、孔隙与体积及轻、中及重质不同组分的校正模型。
In this paper, the correction models of light, middle and heavy components ard sample weight, porosity and volume were established from the view point of influence mechanism.
以正十六烷为模型油相，在油水体积比为1.0的两相介质中考察两菌株的脱硫特性。
Desulfurization ability was studied in a two phase medium, in which the hexadecane was used as model oil and the volume ratio of oil to water is 1.0.
本文给出一种基于叶片锥束体积CT图像序列和叶片CAD模型的叶片壁厚检测方法。
A blade wall thickness inspection method based on blade cone beam volume ct image sequence and blade CAD model are given.
提出了一个在聚合物玻璃体中自由体积随温度而变化的模型。
A model describing the free volume change with temperature in polymer glass is proposed.
本文用相似理论推导了线弹性体在自重体积力作用下原型与模型间的位移关系式。
The relation between displacement of prototype and that of model if derived for the linear elastic body at its body force condition of self-weight based on the similarity theory.
经与光线踪迹法、离散传递法的计算结果比较表明，谱带模型与有限体积解法相结合能处理多场耦合下非灰介质内的辐射换热。
The numerical simulation results indicate that the finite volume method and spectral band model is suitable to deal with coupled radiation-conduction heat transfer of non-gray medium.
采用人工神经网络的方法建立了再结晶晶粒尺寸和再结晶体积分数的预测模型。
The models for predicting the recrystallized grain size and the recrystallization volume percent have been established with the artificial neural network.
这一实验结果与本文提出的完全耦合软磁相体积分数示意模型的计算结果相一致。
This experimental result is consistent with the calculated results using the model of soft magnetic phase volume fractions coupled completely suggested in this paper.
介绍了优化设计模型，采用体积和模数同时极小化的设计目标，提出了分层优化策略；
The model of optimum design is introduced. The design objective of minimizing volume and module simultaneously are adopted, and a graded optimum strategy is presented.
根据结构水合作用模型讨论了迁移偏摩尔体积的变化规律，并与乙醇-水体系作了比较。
The transfer volumes from water to polyol - water mixtures have been obtained and discussed in terms of the structural hydration interaction model.
模型以有限体积法离散，SIMPLEC方法求解速度、压力和温度耦合方程组。
The coupled velocity, pressure and temperature equations are discretized by the finite volume method and solved by SIMPLEC method in this model.
提出了细胞外室体积随时间变化的两室模型并求出了其摄动解。
The two compartment model with variable extracellular volume is presented and solved by using both perturbation and analytical method.
针对针尖胶体的受力情况，建立了一个简单的流量或胶点体积估计模型。
Grounding on the condition of force acting on the fluid in the syringe needle, a simple evaluation model is attained for the flow rate and the dot volume.
基于这一思想，给出了管道泄露检测的数学模型，即体积流量平衡模型、热力平衡模型、瞬变流动模型及其求解方法。
Based on that, the numerical of product leakage and its method of solving are proposed, which include volume balance calculations, heat transfer models and transients fluid flow models.
建立了描述水下混响的声学模型，推导出体积混响的计算方法；
Acoustic model to describing the underwater reverberat i-on is set up and the computation method of volume reverberation is inferred.
建立了描述水下混响的声学模型，推导出体积混响的计算方法；
Acoustic model to describing the underwater reverberat i-on is set up and the computation method of volume reverberation is inferred.
应用推荐