该位移模式满足点支矩形板的所有边界条件。
The boundary conditions are fully satisfied by the proposed displacement function.
取控制微分方程的齐次解作为梁段的有限元位移模式。
The homogeneous solution of the differential equation for the shear lag was taken as the displacement pattern of finite segment.
文中给出了适当的位移模式，推导了渐近方程，并且给出了数值结果。
The proper displacement pattern is given; the asymptotic equations are derived and solved numerically.
在子区位移模式中采用了二阶泰勒多项式表示位移，降低了截断误差；
Two-rank Tailor multinomial has been introduced to decrease cutting errors in subset displacement mode;
该文提出利用断层位移模式从观测的断层位移数据中分析断层发育史。
By utilizing the model of fault displacements, a method to study the history of faults based on observed data of fault displacement was proposed.
文中以实例讲述了如何选取合理的力学模型、单元及位移模式和边界条件。
Here it is described with an example how to select a reasonable dynamic model, element and displaced pattern and boundary conditions.
可基于截面刚度矩阵以及现有的位移模式推导出弹塑性阶段的单元刚度矩阵。
According to section stiffness matrix and available displacement mode, element stiffness matrix of elastoplastic stage was derived in this paper.
用有限个横向条带法构造了板桁组合结构极段考虑局部屈曲的空间位移模式。
A space displacement field considering the deck local buckling for the plate - truss composite is constructed by using transverse finite stripe.
为使剪滞翘曲应力满足轴向自平衡条件，选取了新的翼缘板纵向翘曲位移模式。
A new warping displacement mode of wide flange is chosen to meet the axial self-equilibrium condition for corresponding stress.
在模型中，通过引入一种新的截面位移模式和节点自由度，考虑了剪力滞后效应的影响。
A new cross section displacement function and degree of freedom of nodes are introduced and improved which consider the effect of shear-lag.
采用分层位移模式，引入夹层板层间和表面剪应力协调条件，导出了位移场的修正形式。
By adopting the discrete layer displacement and introducing the compatible conditions of shear stresses at interfaces and on boundary surfaces, the modified displacement field is deduced.
对不同位移模式下水平微分单元进行受力分析，认为位移模式只影响了层间等效内摩擦角。
By the stress analysis of the differential element under different displacement modes, it is supposed that the displacement mode only influences the equivalent internal friction Angle of interlayer.
本文将任意四边形板单元的协调位移模式应用于半无限弹性地基上任意形状弹性地基板分析。
The harmonious displacement model of arbitrary quadrilateral plate element is used to analyze the arbitrary shape elastic foundation plate in the semi - infinite elastic foundation.
根据所提出的位移模式，结合虚功原理推导出组合梁剪力滞效应微分方程以及相应的边界条件。
A set of difFerential equations and the corresponding boundary conditions are derived according to virtual work principle and the longitudinal displacement patterns.
此外，笔者还对造成断裂位移模式复杂化的两种主要因素——岩性变化与剖面效应进行了探讨。
Moreover, the author discussed two main factors, i. e. lithological variation and section effect, which are thought to have resulted in the complexity of fault displacement model.
土体从静止到极限状态是一个渐变的过程，土压力同时受到挡土墙位移模式和位移大小的影响。
The process of soil behind retaining wall changing from resting state to limit state is gradual. The earth pressure is influenced by both the displacement size and displacement modes.
通过大量的弹塑性分析，提出了多层框架结构位移模式保持一致的条件和位移模式的确定方法。
By a great number of calculation and comparison, the displacement-pattern of frame structures is analyzed, and the consistent condition and definition method are provided.
抛弃任何有关应力或位移模式的人为假设，在轴对称情况下，对强厚度叠层闭口柱壳建立其状态方程。
Giving up any assumptions about displacement models and stress distribution, the state equation for the axisymmetric problems of thick closed laminated cylindrical shells is established.
从能量泛函出发，通过引入高阶动态位移模式，导出了杆、梁、框架结构动态有限元列式，建立了杆梁动态有限单元。
Based on energy functionals and with the inclusion of high order dynamic displacement modes, the finite dynamic element formulation for bar and beam is developed.
分析方法是半解析法，没有应力和位移模式的假设，不限制壳的厚度，不要求两壳间的连接弹簧或其它支撑弹簧均匀分布；
A semi-analytical method with no assumption of stress and displacement is developed, in which the thickness of shell is not restricted and the uniform distribution of springs is not needed.
分析了数学形态学的位移运算，结合TMS320C32DSP的流水线操作和I/O并发模式完成了形态学的快速算法。
The displacement operation for mathematical morphology is analyzed . Combined the streamlined operation of TMS320C32 DSP with I/O concurrent mode, a fast algorithm for morphology is carried out.
LQR控制器用于倒立摆的控制模式，保持摆锤稳定在竖直向上不稳定状态点附近，使小车位移跟踪给定信号。
The LQR controller uses the pendulum control mode to keep the pendulum near the vertical up unstable state points and gives signals of car displacement tracking.
我实现的中点位移产生的岛屿不创建所需的模式？
My Implementation of Midpoint Displacement to generate islands does not create the desired pattern?
抛弃任何有关位移或应力模式的人为假设，在轴对称情况下导出正交异性体的状态方程。
Discarding any assumptions about displacement models and stress distribution, the state equation is established for the axially symmetric problem of orthotropy.
根据界面处位移与应力的连续条件，确定了未知弹性波模式系数。
The unknown mode coefficients of elastic waves are determined by means of the continuous conditions of displacement and stress on the boundary of the interfaces.
使用二维矩形破裂模式，导出了大小不同地震的震源位移谱的表达式。
The spectra of the far-field body wave displacement for various magnitude earthquakes are derived, using a two-dimensional faulting model featuring a rectangular fault.
写详细的程序使用纹理着色器，位移，模式生成和自定义反射模型。
Write detailed procedural shaders using texture, displacement, pattern generation, and custom reflection models.
写详细的程序使用纹理着色器，位移，模式生成和自定义反射模型。
Write detailed procedural shaders using texture, displacement, pattern generation, and custom reflection models.
应用推荐