伺服效果：显现化“系统是利用外部的微型计算机对内置在压力机中的传感器的信息和运动数据进行显示和管理的系统。
Servo effect"Mieruka"system is a system that manage press machine e information and slide motion data, and display it to outside PC.
伺服效果：显现化“系统是利用外部的微型计算机对内置在压力机中的传感器的信息和运动数据进行显示和管理的系统。
Servo effect"Mieruka"system is a system that manage press machine information and slide motion data, and display it to outside PC.
气动脉宽调制位置伺服系统是非线性的系统，在气缸摩擦力较大的情况下，采用传统的控制方法难以取得满意的效果。
Pneumatic PWM position servo system is nonlinear system. The satisfied results are difficult to be obtained with traditional control method while the friction force of cylinder is large.
在此基础上设计了适用于单室跳汰伺服系统的模糊P功控制器，利用MATLAB进行仿真，并对控制效果进行了详细的分析。
Based on this, Fuzzy PID Controller applied to single room jigger servo system is designed with simulation by MATLAB, analysis in detail to the control effect is processed.
抽油机电液伺服加载系统存在非线性和位置扰动引起的准确度问题，传统的控制方法不能达到理想的效果。
Aiming at the problems as the nonlinear factors and the position disturbance in the electro-hydraulic servo loading system of pumping unit, the conventional control method cant attain perfect effect.
模糊控制已在交直流调速系统和伺服系统中取得了满意的效果。
The fuzzy control already has obtained the satisfactory effect in the alternating and direct velocity modulation system and the servo system.
采用迭代自学习控制方法来控制气动脉宽调制位置伺服系统，通过实验研究比较了迭代自学习控制与PID控制的效果。
The iterated self-learning control method is employed in pneumatic PWM position servo system. The effects of PID method and the self-learning method are compared by means of experimental results.
将一种改进了的神经网络联想记忆模型应用于雷达伺服分系统的BIT设计中，取得了比较满意的效果。
A new model of neural network associative memory is introduced into the BIT design of radar servo sub-system, which achieves satisfactory effect.
研究结果显示，在一定工况条件下，比例系统的特性基本可以实现伺服系统的控制效果。
It is concluded that under some kinds of working conditions the proportion system can realize the same control effects with that of the servo system.
利用电液伺服控制技术，设计一套适用在颈椎牵引椅中的电液伺服控制系统，通过M ATLAB软件对系统进行仿真，最终获得较好的控制效果。
A set of electro hydraulic servo control system was designed suitable for cervical traction chair and it was proved to be effective through MATLAB stimulation.
对于对位置伺服系统性能有较高要求的虚拟轴机床数控系统，传统的PID控制方法和自适应控制不能达到满意的控制效果。
For virtual axis machine tool that is strict with position servo system, the traditional PID and self-adaptive control method can't obtain the satisfied control effect.
本文通过对普通模糊控制器的改进，研究出一种高精度模糊控制策略，并将其应用于校直机液压伺服控制系统。最后对控制系统进行了仿真研究，取得了较为满意的效果。
This paper proposes a high accuracy fuzzy control strategy which has improved the common fuzzy controller and been applied in the alignment of the straightening hydraulic servo control system.
论述船用跟踪雷达角伺服系统在不同驱动方式下对船摇扰动隔离效果最好的方法，并对扰动模式进行了分析，指出在陀螺回路内加电流环路可进一步提高船摇隔离度。
Based on the analysis of the different interference patterns, a method in which a current loop is added in gyro loop to further improve the degree of isolating for the ship rocked is presented.
基于线性协整理论的液压舵面伺服系统状态监测，已经取得了积极的效果，但显示出对部分故障敏感性较弱的不足。
The linear cointegration theory has been successfully applied on a hydraulic servo system condition monitoring. But the insensitivity to some types of system faults hammered its application prospect.
按照转台的四种功能：位置、速率、伺服和正弦摇摆，设计并实现了各控制系统的硬件、软件，实现四种功能，通过精度检测，达到了技术指标的要求，取得了令人满意的效果。
According to four functions of turn table, position, speed, gyro servo and sinusoidal movement, the hardware circuits and software programs of four control systems are designed and accomplished.
针对纯水液压伺服阀、纯水液压比例阀和三类典型纯水液压开关阀，从工作原理、结构特点、材料选择和实际效果上进行分析。
The working principle, structural characteristics, material selection and results were analyzed for many kinds of water hydraulic valve respectively. The valve developed b...
仿真结果表明：该控制方法在提高系统速度估计精度、改善摩擦力和死区补偿效果等方面具有很好的效果，为直流伺服的系统设计提供了一种较好的方法。
The simulation results show that the proposed method can improve system's speed estimation, and it is effective for promoting the efficacy of friction and deadzone compensation.
抽油机电液伺服加载系统是一种位置扰动型的施力系统，存在着非线性、不确定因素及由于位置扰动引起的多余力，传统的控制方法不能达到理想的效果。
The electro hydraulic servo loading system of pumping unit is a kind of position disturbance servo loading system, and there are nonlinear uncertain factors and position disturbance in it.
抽油机电液伺服加载系统是一种位置扰动型的施力系统，存在着非线性、不确定因素及由于位置扰动引起的多余力，传统的控制方法不能达到理想的效果。
The electro hydraulic servo loading system of pumping unit is a kind of position disturbance servo loading system, and there are nonlinear uncertain factors and position disturbance in it.
应用推荐