作为伺服动力驱动的一个重要元件，中空液压伺服马达在多轴液压仿真转台等领域具有重要的应用价值。
As a servo power actuation important part, the center spatial hydraulic pressure servomotor has the important application value in multiple spindle hydraulic pressure simulation table.
介绍了流体动力系统常用的提高阻尼比的方法，提出了可调液压阻尼器的变阻尼气压比例伺服系统。
Methods of increasing damping radio are introduced for fluid power system, and the pneumatical proportional servo system with variable damping ratio is put forward.
车辆液压动力转向系统通过伺服阀控制压力油的方向和流量，把转向盘输入的转角信号转变为车轮的偏转角度输出。
Vehicle power steering systems control direction and flow of pressure oil with servo valves, then transfer angular inputs from steering wheels to corner angular outputs of road wheels.
为隔离舰船主机及其动力装置振动向甲板的传递，本文研究了液压伺服主动隔振台架。
In order to isolate vibration transmission of marine power plant to decks, an investigation into hydraulic servo active isolation mount for marine diesel set was conducted.
目前用开关阀实现的气动伺服控制已成为流体动力控制领域竞相研究的对象。
At present, the pneumatic servo control using on-off valves has become a subject researched on competitively in the domain of fluid power control.
他们穿着由伺服马达提供动力的巨大盔甲太空服。
该结构电机动态响应快，并可望得到低转矩脉动，适合用作汽车的电子伺服驱动，如汽车电子动力方向盘的伺服电机。
The structural dynamic response motor Express, and is expected to be low torque ripple, suitable for automobile electronic servo-driven, As automotive electronic power steering servo motor.
本文介绍了一种采用微型直流伺服电机驱动的仿生机器蟹步行腿设计及其运动学、动力学分析。
The paper presents the design of walking leg for bionics crab-liked robot, which is driving with micro servo motor.
本文论述了液压伺服系统动力机构匹配问题。
This paper describes problems about the match of power mechanism in hydraulic servo system.
其次以典型三惯量机电位置伺服系统为研究对象，根据系统的物理定律建立了伺服系统的动力学模型。
Next take the typical three-inertia Electrical position servo system as the research object, according to the system physical law set up a dynamic model of servo system.
常速电机提供主要动力，伺服电机起运动调节作用。
The constant speed motor supplies the majority of driving power and the servo motor acts as a motion modulation device.
送料动力：采用交流同步伺服电动机，具有响应快，定位精度高，低噪音，制动热埙小，寿命长等特点。
Feed Power: uses the AC servomotor, fast in response, high in precision, low in noise, low in braking heat loss but long in service life.
结果表明，该方法简便且精度高，为舵面-液压伺服机构的动力学建模和分析提供了有效方法。
The results show that the method is simple and precise, and it provides an effective way to model and analyze dynamics of rudder hydraulic servo mechanism.
各种空气动力装置以及无源阻尼器和伺服阻尼器是可用的。
Various aerodynamic devices, as well as passive dampers and serve dampers, are available.
对永磁交流伺服精密驱动系统进行动力学分析时，必须考虑系统的机电耦合影响。
Electromechanical coupling effect is considered in the dynamic analysis on permanent magnet AC servo precision derive system.
其中常规电机为其提供主要动力，伺服电机在其中起调节作用。
The former provides the main power and motion required, while the latter acts as a motion modulation device.
采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
根据作动器的动力特性，提出液压伺服作动器阶跃响应的双线性简化模型。
This paper introduces a bilinear step response model based on the basic dynamics of an actuator.
提出了一种有限维重复控制方法，以实现对有严重非线性扰动力矩的伺服机构的高精度速率控制。
A finite dimensional repetitive control method is proposed for the high precision velocity control of servomechanisms subject to significant nonlinear disturbance torque.
建立了典型伺服阀控摆式车辆动力系统的物理模型和线性化数学模型。
The physical model and the linear mathematical model of a typical servo valve-controlled tilting car are built up.
空气动力元件以及具有空气动力元件的机翼，伺服驱动-控制模块，计算机，计算机程序和用于影响尾迹涡流的方法。
Aerodynamic body and carrier wing comprising an aerodynamic body, actuating drive control module, computer, computer program, and method for influencing post-turbulences.
研究一种三自由度并联机构动力学建模及伺服系统参数辨识方法。
Aimed at a parallel manipulator with three degrees of freedom translation, a method on dynamic modeling of parallel manipulator and parameter identification of its servo system is presented.
实现机器人的视觉伺服系统涉及到图象处理、运动学、动力学、控制理论、实时计算等多方面的内容。
Robot visual servo system involves a wide range of content, for example image processing, kinematics, dynamics, control theory, real-time calculation and so on.
伺服力量和控制线寻址横跨扩展倒栽跳水提供另外的供给动力的选择和另外的伺服口岸当扩充电路板被安装。
The servo power and control lines are routed across the expansion header to provide additional powering options and additional servo ports when the expansion board is installed.
裁剪动力：采用进口伺服控制技术，速度快，噪音小，寿命长。
Cutting Power: USES the imported servo-control technology, fast in speed, low in noise but long in service life.
大望远镜设计中，伺服系统与机械设计的关系并不局限于驱动力矩与速度的满足。
In designing a large telescope, the relation between the servosystem and the mechanism is not limited to the satisfaction in driving torques and velocities.
在动力学视觉伺服中，根据视觉检测结果，计算机器人的加速度和关节转矩，实现机器视觉的力反馈作用。
In dynamic visual servo, the robot acceleration and joint's torque are calculated based on vision detection result to realize the force servo of machine vision.
在肩关节动力学模型的基础上，建立了肩关节伺服电机峰值预估模型。
Based on the above dynamic model, the peak prediction model of servo motor for the shoulder joint was defined.
在肩关节动力学模型的基础上，建立了肩关节伺服电机峰值预估模型。
Based on the above dynamic model, the peak prediction model of servo motor for the shoulder joint was defined.
应用推荐